Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Kennedale?
For most homeowners in Kennedale, TX, professional gate access control installation typically ranges from $450 to $1,800, depending on the complexity of the system and the specific hardware required. This total covers the labor, the controller hardware, and the necessary integration with your existing gate motor. Repairs to existing access systems in the Kennedale area usually cost between $150 and $450, depending on whether the issue stems from a simple keypad wiring fault or a more complex circuit board failure.
At Ironworks Gate Co., we believe in upfront pricing. We do not believe in hidden fees or surprise charges once we are already on your property. Whether you are looking to upgrade an older gate or install a brand-new access system, we provide a clear, written estimate before any work begins. If you have questions about your specific driveway setup, call us at (817) 286-7391 to discuss your options.
Gate Access Control Cost Breakdown (2026)
Understanding what you are paying for is the first step in making a smart decision for your home. Costs in Kennedale can fluctuate based on the technology you choose and the current state of your gate infrastructure. Below is a breakdown of typical costs you will encounter in the local market this year.
| Service or Component | Estimated Cost Range |
|---|---|
| Standard Keypad Installation (Wired) | $450 - $750 |
| Wireless Keypad & Receiver Kit | $350 - $600 |
| Smartphone Access Module (Add-on) | $400 - $700 |
| Intercom System (Audio/Video) | $900 - $1,800+ |
| Access System Troubleshooting/Repair | $150 - $450 |
| Seasonal Tune-Up (General Gate Maintenance) | $89 (Fixed Price) |
When you look at these numbers, remember that they reflect the cost of quality components that stand up to North Texas weather. We see many homeowners in neighborhoods near the Kennedale Town Center or out by the larger lots near Mansfield who try to save a few dollars on “bargain” keypads from big-box stores. Unfortunately, those units often fail within 18 months due to the extreme heat and sudden humidity changes we experience here. We prefer to install equipment from brands like LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule because these systems are built to last in our climate. When we install a system, we stand behind it with our 90-Day Done Right Promise. If it is not working as expected, we come back and make it right.
What Affects Gate Access Control Pricing in Kennedale
Pricing for gate access control is rarely a flat rate because every driveway and security requirement is different. When Victor Salinas and our team look at a job in Kennedale, we consider several variables that influence the total cost.
- Existing Wiring Integrity: If your current gate opener has old, corroded, or damaged wiring running from the house to the gate, we must replace it to ensure the new access control system functions reliably. This adds labor time and materials to the estimate.
- System Compatibility: Not every keypad works with every motor. If you have an older gate motor, we may need to install an external receiver to allow modern keypads or smartphone apps to communicate with your gate.
- Distance from Power Source: If your keypad needs to be mounted on a separate pedestal away from the gate motor, we have to trench and run conduit for the wiring. The distance from your power source to the control point significantly impacts the cost of the installation.
- Technology Level: A basic digital keypad is far more affordable than a video intercom system that connects to your home Wi-Fi or cellular network. The more “smart” features you require, the higher the hardware cost.
- Structural Mounting: Installing a keypad on a brick pillar requires different tools and fasteners than mounting it on a steel post. We take the time to mount these units securely so they do not wobble or loosen over time due to the frequent operation of the gate.
Because we have been serving this community since 1984, we know the local landscape. We do not guess at the price; we assess the specific conditions of your driveway and give you an honest number. If you want a professional opinion on what your gate needs, call (817) 286-7391. We are ready to help.
How to Save on Gate Access Control
You do not have to overspend to get a reliable, secure gate system. We see many homeowners in Kennedale get stuck in a cycle of paying for cheap repairs on low-quality equipment. Saving money is about making the right choice the first time.
First, consider combining services. If we are already out for a repair, adding a keypad upgrade or a remote receiver installation is often cheaper than scheduling two separate service calls. We also offer an $89 Seasonal Tune-Up that keeps your gate motor and hinges in good shape, which prevents the kind of heavy wear and tear that leads to expensive emergency repairs later.
Second, take advantage of our standing offers. We provide a $50 discount on any repair over $250, and we offer a 5% discount for all seniors and veterans. If you have received a quote from another company and want to be sure it is fair, call us for a free second opinion. We are happy to look at their estimate and tell you if it is a square deal or if you are being overcharged.
Finally, avoid the “do-it-yourself” trap with high-tension components. While you might be tempted to install a keypad yourself, messing with the wiring on a gate motor can void your warranty or cause a short circuit that damages the main control board. A short circuit repair is always more expensive than the initial professional installation. Call us at (817) 286-7391 for a free estimate and let our background-checked, uniformed technicians handle the job safely.
FAQs - Gate Access Control Cost
How much does it cost to fix a gate keypad that isn’t working?
Most keypad repairs in Kennedale fall between $150 and $450. The final cost depends on whether we need to replace the entire unit, fix a wiring break, or simply reset the programming to your gate’s receiver. If you are having trouble, call (817) 286-7391 for an exact quote.
Is it cheaper to repair an old access system or replace it?
In many cases, if your system is over 15 years old, replacing it is more cost-effective than constant repairs. Modern gate access systems are more reliable and compatible with current smartphones, whereas parts for older units are becoming difficult to find. We can provide a free estimate to help you weigh your options.
Can you install a smartphone-controlled gate opener?
Yes, we frequently install smartphone modules that allow you to open your gate from anywhere, provided your gate motor is compatible. This is a popular upgrade for homeowners who want to grant access to guests or service providers while away. Call (817) 286-7391 to see if your current setup supports this technology.
Do you offer same-day service for gate access issues?
We prioritize getting our customers back to security as quickly as possible. Because we operate with a full team of trained technicians, we are often able to accommodate same-day requests for urgent repairs. Please call (817) 286-7391 as early in the day as possible so we can get you on the schedule.
Are there any hidden fees with your estimates?
We do not have hidden fees. We believe in a square deal with upfront pricing, meaning the price we quote is the price you pay once the work is approved. We ensure there are no surprises on the bill before a single bolt is turned. Call us at (817) 286-7391 for a free estimate.
Pricing reflects the Kennedale market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 286-7391. Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.
What Our Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad