Gate Repair in Kennedale - Same-Day Repair, Priced Before We Start

Trusted Gate Repair for Kennedale Homeowners

When a gate stops closing, sags on its hinges, or refuses to open at the worst possible moment, you need a repair crew that treats the job as seriously as you treat your home. Ironworks Gate Co. has repaired driveway and estate gates across Kennedale for over 42 years, and we answer the phone with a live person every single time. Most Gate Repair in Kennedale jobs are completed in a single visit, with the price agreed before any work begins. Call (817) 286-7391 and you will reach a real person, day or night.

Call (817) 286-7391

Victor Salinas leads our crew with a simple rule: the 400th job gets the same care as the first. That is why every repair we complete is covered by our written 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing, no exceptions. You live in Kennedale because you want a home that works. A gate that does not work undermines that. We fix it once, and we stand behind it.

What Our Gate Repair Service Includes

Gate repair covers more than most homeowners expect. A gate is a system of steel, hinges, wheels, motors, sensors, and locks, and when one part fails, it strains every other part. Here is what we handle for Kennedale homeowners, and how we approach each repair.

Electric Gate Repair

Electric gates fail for reasons that are rarely obvious: a control board corroded by North Texas humidity, a limit switch that slipped out of adjustment, a sensor that no longer sees the driveway. We trace the fault to its source rather than replacing parts on a hunch. Our technicians arrive in a stocked van with diagnostic tools for nine major gate-automation brands, so the fix is usually made the same day. If you hear the motor running but the gate barely moves, or if the gate stops halfway and reverses for no reason, call our Emergency Gate Repair in Kennedale, TX team before the problem strains the motor to failure.

Automatic Gate Repair

An automatic gate is two systems working together: the steel that moves and the machinery that moves it. When the two fall out of sync, you get grinding, stuttering, or a gate that opens but will not close. We repair both sides of that equation. Whether the problem is in the opener, the chain or belt, the safety edges, or the control wiring, we restore the gate to smooth, reliable operation. Victor Salinas and his crew have seen nearly every failure mode an automatic gate can produce in four decades of working North Texas driveways, including plenty of Arlington Gate Repair calls.

Hinge & Post Repair

Hinges carry the full weight of the gate every time it moves, year after year, in heat and humidity and the occasional Texas ice storm. When a hinge wears or a post shifts, the gate drops, scrapes the ground, and forces the opener to work against increasing resistance. We rebuild hinge points, reinforce or replace posts, and set the gate back to its proper plane so it swings like it did when it was hung. Ignoring a sagging hinge is the fastest way to turn a simple repair into a full gate replacement.

Gate Realignment

A gate that drags, binds, or leaves a gap at the latch is out of alignment, and continuing to run it that way accelerates wear on every moving part. We realign the gate to its original position, checking the post plumb, the hinge alignment, and the gap between gate and ground. In Kennedale’s clay-heavy soil, posts can shift over time even in fences that were perfectly set a decade ago. We correct that movement and restore the gate to square.

Lock Repair

Locks fail in two ways: they stop opening, or they stop locking. Both leave you frustrated and, in some cases, unable to secure your property. We repair and replace gate locks of all types, from simple mechanical latches to electric strikes and keypad-controlled locks. If your key turns but the latch will not retract, or if the lock engages but will not hold under pressure, we can usually rebuild or replace the mechanism on the spot.

Weld & Rust Repair

Steel gates in North Texas rust from the inside out, especially at weld points where moisture collects and sits. When rust compromises a joint, that joint carries stress it was never designed to carry. Our technicians are welders and fabricators first, which means we do not just patch the visible rust, we cut back to solid metal and rebuild the joint. The result is a repair that looks like part of the original gate and holds like it too. If the rust is caught before it reaches a structural member, we grind, treat, and repaint to stop the progression.

Brands We Service for Gate Repair

We have repaired LiftMaster openers in Kennedale driveways for decades, and we keep their OEM parts on our trucks because LiftMaster failures tend to follow predictable patterns. A capacitor or a control board goes out, and the gate stops mid-cycle. We fix it on the first trip, with the right part, rather than making you wait for a second visit.

Mighty Mule units are popular in rural and semi-rural lots around Kennedale, and we service them regularly. FAAC and BFT are common on heavier estate gates and commercial-grade systems, and we are trained on their hydraulics and control logic too. Whether your gate runs on a Mighty Mule you installed ten years ago or a Viking opener that came with the house, we can service it. If it opens on a motor, we have probably worked on it.

Signs You Need Gate Repair Right Now

• The gate is scraping the ground or sticking at one point. A gate that drags has already moved out of alignment, and every cycle is grinding away at the hinge and the opener. In Kennedale, where gates see heavy use coming and going all day, that kind of resistance shortens the life of the motor quickly.
• The opener is running but the gate barely moves. This almost always means the drive system, chain, belt, or gear, has failed while the motor is still trying to work. Running it in this condition burns out the motor, which turns a modest repair into a far more expensive one.
• The gate reverses or stops without reason. Safety sensors are designed to stop the gate if something is in the way, but a dirty or misaligned sensor will trigger false stops. The frustration is not the only problem; a gate that behaves unpredictably is a safety risk for kids, pets, and cars.
• You hear grinding, popping, or a loud bang when the gate moves. Those sounds are mechanical parts telling you they are failing. A bang is often a gear or a weld letting go. Shut the gate down and call us before the damage cascades through the rest of the system.
• The gate has visible rust at welds or joints. Rust at a weld joint is structural, not cosmetic. North Texas humidity and occasional standing water accelerate it. We would rather catch it early and repair it than replace an entire gate leaf later.

Our Gate Repair Process - Step by Step

We run every repair the same way, so you know exactly what to expect from the first call to the final check.

Step 1: You Call, We Answer

A live person answers the phone 24 hours a day, seven days a week. No voicemail trees, no automated prompts, no waiting for Monday. You describe the problem, we ask a few questions, and we schedule a visit that fits your day.

Step 2: We Diagnose the Gate

Our technician arrives in a uniform, truck stocked, and begins by examining the entire gate system, not just the part you reported. We check the hinges, the posts, the operator, the safety edges, the wiring, and the control board. A thorough diagnosis is the difference between fixing the symptom and fixing the cause.

Step 3: We Give You a Written Price Before Any Work Starts

Once we identify the problem, we explain it in plain language and give you a firm price. You approve it before we touch a single bolt. This is our standard practice on every job in Kennedale. If the repair is not worth doing, we will tell you that too.

Step 4: We Make the Repair

Most repairs are completed in one visit. We carry OEM parts for nine major brands, along with the welding and fabrication equipment to rebuild hinges, posts, and weld joints on site. Our technicians are background-checked and trained to work in your home the way they would work in their own mother’s.

Step 5: We Test, Then We Stand Behind It

Before we leave, we cycle the gate through its full range of motion, check the safety edges, and confirm the limit settings. Then we hand you the written 90-Day Done Right Promise. If anything is not right within 90 days, we come back and make it right. That is the Keystone Standard, and we do not make exceptions.

How Much Does Gate Repair Cost in Kennedale?

Gate Repair Near Kennedale - Our Service Area

Ironworks Gate Co. serves Kennedale and the surrounding communities, including Arlington, Everman, Forest Hill, Mansfield, Rendon, Bedford, Crowley, Burleson, Richland Hills, Grand Prairie, and Fort Worth. Response times vary by location and time of day, but our live dispatch team can typically get a technician to most addresses in the Kennedale area within a day. For other cities, see our Gate Repair in Arlington and Gate Repair in Everman pages for location-specific details.

Frequently Asked Questions - Gate Repair in Kennedale

Schedule Your Gate Repair Service in Kennedale Today

Call (817) 286-7391 and a live person will answer, day or night. Tell us what your gate is doing, and we will give you an honest assessment and a free, no-obligation estimate. The price is agreed before any work starts, and every repair is protected by our written 90-Day Done Right Promise. When you want it done right, call Ironworks Gate Co. We will be there when we say.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.