Frequently Asked Questions - Gate Repair in Kennedale, TX
Straight answers to the questions we hear most from homeowners around Kennedale, Arlington and Mansfield. If you don't see your question here, call us at (817) 286-7391 and we'll talk it through.
Pricing & Cost FAQs
Most gate repairs in Kennedale run between $185 and $600 depending on what failed. A welded hinge fix or a sensor alignment sits at the lower end. A new opener arm, a control board, or repairing a sagging steel gate runs higher. We quote every job before work begins, in writing, and that number doesn't move unless you approve a change. Call (817) 286-7391 and we'll come out, look it over, and give you a firm price.
Replacing a gate opener motor in the Kennedale area typically costs between $450 and $900 installed, depending on the opener type and the amount of rewiring required. Slide gate motors and heavier swing gate operators with larger capacitors cost more than light residential swing motors. We'll quote the exact motor, the labor and any needed control components before we touch anything, so you know the full number up front.
Repair is almost always cheaper when the gate structure is sound. A bent hinge, a failing opener, or a rusted wheel can be fixed for a fraction of a new gate's cost. We replace only when the steel is too far gone to weld safely, or when the frame is twisted beyond re-hanging. Victor Salinas will tell you honestly which side of that line your gate falls on, and we'll never sell a replacement you don't need.
A complete residential gate installation in Kennedale typically ranges from $2,800 to $7,500, covering the gate leaf, posts, hinges, opener if you want automation, and installation. Estate gates and custom steelwork run higher. The best way to get a real number is a free measure and written estimate. We'll come out, take dimensions, check the ground where posts will set, and price it line by line so there are no surprises on the bill.
No. Estimates are free, whether it's a repair call or a full installation measure. We come out, look at the gate, figure out what's actually wrong, and hand you a written price. You decide from there. No charge for the visit, no obligation, no pressure.
Cost depends on the part, the labor involved, and what's around the gate. A control board replacement is parts-heavy but quick. A post that's shifted in North Texas clay soil means digging, re-setting concrete, and re-hanging the gate leaf, which is slower work. A gate at the end of a long driveway in Rendon with no power outlet nearby adds electrical work. We price each job by what it actually requires, not by a flat menu.
Service & Process FAQs
In many cases, yes, especially when the gate won't open at all or has come off its track. We keep common parts on the truck so a single trip often finishes the job. Our real hours are Monday through Friday 7:00 AM to 8:00 PM, Saturday and Sunday 7:00 AM to 7:00 PM. Call (817) 286-7391 in the morning and we'll get you scheduled as early as the same day when the schedule allows.
We start by finding the actual fault. That means listening to the motor, checking the hinges and welds, testing the photo eyes and the keypad, and tracing power to the control board. When we know what failed and why, we explain it in plain English and give you the price. You approve it, we fix it, and then we run the gate through several full cycles to confirm it's right before we leave.
Yes. Most of the repair work we do in Kennedale, Arlington and Fort Worth is on gates another company hung years ago. Steel is steel and a bad hinge is a bad hinge, regardless of who built the gate originally. We'll work on your existing gate, match the metal where welding is needed, and get it swinging true again. If the original opener is too far gone, we'll recommend a compatible replacement and explain why.
Most repairs are finished in one visit, usually within one to three hours on site. A hinge weld or opener adjustment is often under an hour. A complete opener swap with new wiring may take half a day. When a repair requires a part we don't carry, we'll place the order during the visit, give you an honest timeline, and come back when it arrives. You'll know the plan before we leave.
Yes, and it's one of the most worthwhile upgrades we do for homes around Kennedale. Converting a manual gate involves mounting an operator, setting posts or pads for it, running power to the gate location, and programming remotes and a keypad. It's measured, quoted and scheduled work rather than a same-day repair. We'll give you a free measure and a written price that includes everything.
Brands & Parts FAQs
We service and install all the common residential brands, including LiftMaster, Mighty Mule and FAAC. Each has its own quirks, and we've learned them the hard way over years of field calls. Whether your opener is a decade-old chain-drive or a newer belt-drive, we can diagnose it, source the right part, and get it running. If a particular board or motor is no longer made, we'll tell you straight and recommend a reliable replacement.
We stock the most common failure parts: photo eyes, keypads, receiver boards, capacitors, remotes, and hinge hardware. That lets us finish a high percentage of repair calls in a single visit. Specialized control boards or unusual motor assemblies sometimes need to be ordered. When that happens, we'll place the order the same day and schedule your return visit before we leave your driveway.
In most cases, yes. The gate leaf itself is steel, and steel can be welded, straightened and re-hung as long as the frame hasn't rusted through. The opener is a different story. If the motor or board is discontinued and no compatible replacement exists, we'll recommend a modern opener from a brand like LiftMaster or FAAC and install it without disturbing the gate you already own. We won't push a full replacement unless the metal itself is done.
Openers and parts we install carry the manufacturer's warranty, and our workmanship is covered for 90 days under the Keystone Standard: if something we did isn't right, we come back and fix it. No paperwork, no arguing. That's the guarantee on every job we do, stamped on the page and honored in person. Tell us at (817) 286-7391 and we'll schedule the return call.
Licensing & Insurance FAQs
We carry the insurance and bonding expected of a professional contractor in Texas, and every pro working under our name is required to hold the license and insurance the state requires. We're glad to show proof when we arrive for your estimate. Working on a gate means dealing with heavy steel, electricity, and moving parts, and you should never let an uninsured handyman take that on. Call (817) 286-7391 and we'll walk you through it.
Simple repairs rarely need a permit. Replacing an opener, welding a hinge, or adjusting a track is maintenance work. New gate installations, especially automated ones with electrical runs, can trigger Kennedale city requirements depending on the location and setback. We'll check the local rules for your specific address as part of the estimate and tell you what's needed before work begins. You'll know the full picture, permit included, before you commit.
A live coordinator answers when you call, and that person connects you with the local team that serves your area. The technician who arrives is trained on gate systems, carries the parts needed for most calls, and works under the Ironworks brand standards. Victor Salinas leads the local operation. The same team that quotes your job is the team that fixes it. That keeps the work consistent and the communication clear.
Emergency & Response FAQs
Yes, we prioritize calls where a gate has failed closed and a vehicle is trapped or can't get in. Call (817) 286-7391 during business hours, explain the situation, and we'll work you into the day's schedule as quickly as the route allows. Our business hours are Monday through Friday 7:00 AM to 8:00 PM, Saturday and Sunday 7:00 AM to 7:00 PM. Tell us exactly what the gate is doing and we'll bring the right parts for a one-trip fix.
A gate stuck open isn't trapping anyone, but it does leave your property exposed and your opener sitting in a fault state. If you can close it manually and leave it unplugged, that's usually fine until we arrive. If it won't budge or you don't feel safe leaving it open overnight, call us and we'll schedule you for the earliest available slot. We'll diagnose the fault and get it closing on command again.
We're open Saturday and Sunday from 7:00 AM to 7:00 PM, and we take emergency repair calls during those hours the same as weekdays. If your gate has failed and you need it secured or opened, call (817) 286-7391 and we'll do our best to get someone out that day. For a non-urgent issue, the same number works for scheduling a time that fits your week.
Warranty & Guarantees FAQs
The Keystone Standard is Ironworks Gate Co.'s guarantee, applied to gates: 90 days, in writing, no arguing. If something we installed or repaired fails because of our workmanship within 90 days, we come back and make it right at no charge. No forms to file, no claims process, no back-and-forth. It's the same promise the brand's other trades stand behind, and it's stamped on every job we do in Kennedale.
Then it wasn't fixed right, and that's on us. Call (817) 286-7391, tell us what's happening, and we'll schedule a return visit under the 90-day workmanship guarantee. We don't argue about it. If the new problem turns out to be a different component failing on an old gate, we'll show you the evidence and quote the new repair separately, but we won't charge you twice for the same failure. That's the square deal.
Our 90-day workmanship guarantee covers the labor we performed and the parts we installed. Manufacturer defects on openers and electrical components are covered by the manufacturer's own warranty, which we'll pass through to you with the supporting paperwork. If a part fails under the manufacturer's term, we handle the diagnosis and the replacement work. You'll never be left chasing a vendor on your own.
For most gate problems, no. The exception is replacing remote batteries or clearing debris from a slide track. Beyond that, you're usually dealing with heavy steel under tension, high-voltage connections, and pinch points that can crush fingers. Torsion springs and gate hinges under load have hurt people who thought it looked simple. Our advice is to call (817) 286-7391, let us diagnose it safely, and skip the trip to urgent care.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale and the surrounding area since 2013.
Still Have Questions?
We are happy to help. Call us - same-day and after-hours emergency service available.
(817) 286-7391