Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for Kennedale Homeowners
A gate motor that grinds, stalls, or refuses to move leaves your driveway frozen and your property less secure. Ironworks Gate Co. has kept Kennedale gates opening and closing properly for over 42 years, since 1984, with trained technicians who provide the Best Gate Motor & Opener in Kennedale, TX service on the first visit. We answer our own phones around the clock, and most motor repairs and replacements in Kennedale are completed same-day. Call us at (817) 286-7391 and you’ll talk to a live person who knows gates, not a call center. Victor Salinas has built this company around a simple promise: we fix it right, we write it down, and we stand behind it for 90 days.
What Our Gate Motor & Opener Service Includes
We handle the full scope of gate automation work in Kennedale, from a single motor swap to a complete operator package with battery backup and intercom integration. Homeowners reach a point where the gate has become unreliable, and the last thing they need is a handyman experimenting with it. Our scope is specific: we replace motors, repair drives, set travel limits, wire safety edges, and make sure the gate closes like it should. If you’re unsure whether you need a repair or a replacement, a technician will tell you straight, and the price is settled before any work begins.
Motor Installation
A new motor is the right call when your current operator is over 12 years old, has been repaired twice in the past few years, or no longer holds its open and close limits. We remove the old operator, mount the new one, set the travel, force, and delay settings, and test the full cycle at least a dozen times before we leave. Our installation work covers pad-mount, post-mount, and underground operators, matched to the weight and swing or slide direction of your gate. Every new motor installation in Kennedale is finished with a full walkthrough and written pricing that was agreed before we touched the gate.
Motor Repair
When a motor hums but doesn’t move, trips its breaker, or moves in jerks, the cause is usually a failing capacitor, worn limit switch, damaged gearbox, or a circuit board that’s lost its programming. Our technicians carry OEM and high-grade aftermarket parts on the truck, so most repairs are completed in a single visit. We test the motor under load, not just on the bench, because a gate that cycles fine with no gate attached tells you nothing. A repaired motor is tested ten full cycles with the gate connected before we call the job done.
Linear Motor
Linear arm operators are common on swing gates in Kennedale’s long-established neighborhoods, where driveway widths are moderate and the gate is fabricated steel or ornamental iron. These motors use a threaded shaft driven by a 24V DC or 110V AC motor to push and pull the gate leaf. We service, rebuild, and replace linear actuators from LiftMaster, FAAC, BFT, Viking, and more. If your linear arm binds, whines, or pushes the gate past its limit, call before the arm bends or the hinge welds start to crack.
Slide Motor
Slide gate operators handle heavier gates and are built for wider driveways, commonly found on the larger lots along Kennedale’s east side and toward Mansfield. These systems depend on a chain, rack, or belt drive, and the motor has to be matched to the gate’s weight, length, and wheel or track condition. We replace slide motors, re-tension chains, set magnetic limits, and align rack and pinion drives. A slide motor that’s been wired wrong will chew through gears in months; we see it often and correct it on the first visit.
Intercom Integration
Many Kennedale homeowners want delivery drivers, family, or guests to reach them at the gate without a standalone intercom that doesn’t talk to the opener. We wire and program intercom and keypad systems so a call or code cycles the gate reliably. Whether you have an existing intercom that’s stopped triggering the motor or you’re adding one for the first time, we’ll match the wiring to your operator’s control board. We test every relay, every buzzer, and every phone line or wireless link before we leave.
Battery Backup
A power outage shouldn’t turn your gate into a dead wall, and a battery backup is the answer for homeowners who want the gate to operate during blackouts and storms. We install, replace, and test sealed lead-acid and lithium backup batteries sized to your operator. Kennedale’s summer storms knock out power more often than people expect, and a dead backup battery is the most common reason gates fail right after an outage. We replace the batteries, test the charging circuit, and run the gate on battery alone to prove it works.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We’re trained and equipped on nine gate-automation brands, and two of the most common on Kennedale driveways are LiftMaster and FAAC. LiftMaster operators are built tough but have control boards that fail in specific, diagnosable ways; we carry their common boards and remotes on the truck, and we know the programming sequences cold. FAAC units, particularly their 400 and 770 series, are excellent hydraulic and electromechanical workhorses, but limit switch drift and hydraulic fluid leaks are the usual trouble. If your FAAC gate is opening too far or too slow, that’s a fix we make same-day in most cases.
Mighty Mule and BFT are also common, particularly on newer estate properties and DIY-installed gates. Mighty Mule openers are popular for light single-swing gates, but the factory boards are sensitive to voltage spikes and antenna wiring done wrong. BFT is European-built and reliable, but parts availability through generic suppliers is spotty, and generic boards cause more problems than they solve. Whatever brand is on your driveway, we carry or can source the correct parts, and we’ll give you an honest recommendation on repair versus replacement.
Signs You Need Gate Motor & Opener Right Now
- Gate reverses or stops midway. The motor’s force settings or safety edge may be failing, or the travel limits have drifted. A gate that reverses unpredictably can close on a vehicle or a person.
- Motor hums but the gate doesn’t move. This usually means the capacitor is failing or the gearbox has stripped. Running it this way burns out the windings fast and turns a $250 repair into a $900 replacement.
- Remote works only inches from the receiver. The receiver board, antenna, or remote batteries are failing, and the gate will eventually stop responding altogether. You shouldn’t have to park in the street to press the button.
- Gate opens on its own or doesn’t close fully. A phantom-opening gate often has a shorted loop detector or a board that’s picking up interference. A gate that won’t close leaves your property open to anyone who drives by.
- Burning smell, tripped breaker, or scorch marks near the motor. This is an electrical fault, not a nuisance. Cut power to the operator and call a trained technician. Continued use risks fire and destroys the motor.
Our Gate Motor & Opener Process - Step by Step
- 1
Diagnostic visit and written quote. A technician arrives in a marked vehicle, confirms the issue, and gives you a written price before any work begins. If the repair is under $250 and you want a second opinion, we offer a free second opinion on any written estimate.
- 2
Part verification and timeline. If the part is on the truck, which it usually is for common LiftMaster, FAAC, BFT, and Mighty Mule repairs, we start the same day. If it needs ordering, we tell you exactly when it will arrive and schedule the return visit before we leave.
- 3
The repair or installation itself. We pull the motor, replace or rebuild what’s needed, set travel limits and force, and rewire the controls to manufacturer spec. Every completed job gets tested with the gate attached, under real load, not on a workbench.
- 4
Full cycle testing and safety check. We run the gate through at least ten complete open-close cycles, test the safety edges and photoelectric sensors, and verify the battery backup if installed. We don’t call a job done until the gate runs like it should, every time.
- 5
Walkthrough and the 90-Day Done Right Promise. We show you what was done, hand you the written guarantee, and confirm the final price. If anything isn’t right within 90 days, we come back and make it right. No forms, no argument.
How Much Does Gate Motor & Opener Cost in Kennedale?
A typical gate motor repair in Kennedale runs $180 to $380, depending on whether it’s a capacitor, limit switch, or control board replacement. A full motor replacement, including the operator and installation, usually runs $850 to $2,200, with the swing or slide style, gate weight, and brand driving the difference. A linear arm replacement on a standard single swing gate averages $650 to $1,100, while a slide motor replacement for a heavier gate typically runs $1,200 to $2,500. Battery backup installation adds $250 to $500 depending on the battery type and enclosure. Every job is quoted up front, and the price we quote is the price on your invoice.
What affects the price most is the gate’s weight and length, the condition of the existing wiring, and whether safety edges and loops need to be brought up to current code. You avoid overpaying by getting a diagnosis, not a guess. We don’t charge for the estimate, and we don’t sell parts you don’t need. If your gate has been repaired twice in two years, replacement is often cheaper than a third repair, and we’ll tell you that plainly.
Gate Motor & Opener Near Kennedale - Our Service Area
Ironworks Gate Co. works throughout Kennedale and the surrounding communities. We’re regularly in Arlington, Mansfield, Forest Hill, Rendon, and Burleson, with same-day availability most weekdays. We also serve Fort Worth, Grand Prairie, Crowley, Bedford, Richland Hills, and Everman, where our Gate Motor & Opener in Everman service is well established. For a closer look at our broader service footprint, visit the home page or the Gate Motor & Opener in Arlington page.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in Kennedale
Gate Motor & Opener in Kennedale service covers everything that powers and controls an automatic driveway gate: the motor itself, the control board, remote receivers, safety edges, battery backup, and intercom or keypad integration. In Kennedale, this means keeping swing and slide gates opening and closing correctly, day after day, on both residential and estate properties. We repair, replace, and install these systems, and every job is backed by our written 90-Day Done Right Promise.
Most Kennedale gate motor repairs take between one and three hours once the technician is on site. Common fixes like capacitor replacement, limit switch adjustment, or remote programming are done in a single visit. Motor replacements and boards that need ordering may take two to five days, and we schedule the follow-up before we leave the property.
A gate motor installation or replacement in Kennedale generally runs $850 to $2,200, including the operator and labor. Repairs range from $180 to $380 for most capacitor, switch, and board replacements. The exact price depends on your gate’s weight, the motor type, and the brand, and it’s always quoted and agreed in writing before work starts. Call (817) 286-7391 for a free estimate.
Yes, we service LiftMaster gate openers regularly across Kennedale. Our technicians carry the common LiftMaster control boards, remote receivers, and safety sensors on the truck, so most repairs are same-day. We also service FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite.
A live person answers our phones 24 hours a day, 7 days a week. If your gate is stuck open or closed and you need Emergency Gate Motor & Opener in Kennedale, TX help now, call (817) 286-7391 and we’ll dispatch a technician as soon as possible. Emergency calls are serviced by our own uniformed, background-checked team, not a subcontractor.
Every gate motor and opener job we complete in Kennedale is covered by the 90-Day Done Right Promise. It’s a written guarantee: if it isn’t right, we come back and make it right. No forms, no arguing, no exceptions. Most parts we install also carry their own manufacturer warranty, which we’ll explain at the time of service.
Clear the area within about five feet of the motor and gate hinges so the technician has room to work. If you have a bypass or manual release, you can leave the gate in any position; otherwise, don’t force the gate manually. Have your remote controls and any gate manuals out where we can see them. We handle the rest.
Schedule Your Gate Motor & Opener Service in Kennedale Today
A gate that doesn’t open or close isn’t just an inconvenience; it’s a hole in your property’s security. Call Ironworks Gate Co. at (817) 286-7391 and talk to a live person right now. We’ll schedule a visit, diagnose the problem, and give you a written price before any work starts. No obligation, no pressure, and the job is done right, guaranteed in writing. Victor Salinas and our team have been serving Kennedale and the surrounding area, including Arlington Gate Motor & Opener, for over 42 years. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.