Ghost Controls Gate Motor & Opener Nationwide

Ghost Controls Gate Motor & Opener in Kennedale: What to Know First

Ghost Controls gate motor and opener service in Kennedale is what we do regularly, and most jobs are diagnosed and repaired in a single visit. We’re an independent Ghost Controls service provider, not an authorized dealer, which means we answer to you and the quality of the repair, not a manufacturer’s script. Call (817) 286-7391 and a live person answers, 24 hours a day.

Call (817) 286-7391

If you own a Ghost Controls opener on a swing gate, a slide gate, or a driveway arm, this page covers what fails, what it costs to fix, and why the repair approach matters more than the brand label on the box. Victor Salinas and the Ironworks Gate Co. team have worked on Ghost Controls systems across Kennedale from the neighborhoods off Mansfield Cardinal Road to the acreage properties south of Dick Price Road. We know these openers because we see them every week, not because we read a manual once.

Key takeaways:

• Most Ghost Controls repairs in Kennedale are completed in one visit.
• We service every Ghost Controls configuration: swing arm, slide motor, and battery backup setups.
• Price is quoted and agreed before any work starts. No surprises on the bill.
• Every job carries our written 90-Day Done Right Promise.

How Ghost Controls Products Fail - and How We Fix Them

Ghost Controls makes a solid residential opener, but every product line has its characteristic failure points. Here’s what we see on Kennedale driveways, week after week.

• AXDP and AXD series swing-arm actuators: stripped plastic drive gears. These arms use an internal plastic gear that takes the brunt of every open and close cycle. In Kennedale’s summer heat, that plastic softens, and over time the teeth shear. The symptom is a motor that hums but the gate barely moves, or moves in jerks. We open the actuator, replace the gear with a quality replacement, re-grease the assembly, and the arm runs quiet again. Ghost Controls sells the gear as part of a rebuild kit, but we’ve found the aftermarket gear with a higher-temperature nylon rating outlasts the OEM part by a meaningful margin.
• R416L and R430L control boards: relay failure after electrical surges. Kennedale gets proper thunderstorms in the spring, and a nearby lightning strike or a surge on the grid can cook the relay that drives the motor. The board still lights up, the remote still beeps, but the gate won’t move. We test the relay in place, and when it’s dead, we replace the board with an OEM Ghost Controls board rather than a generic aftermarket clone. The clones work for a few months, but the voltage tolerances drift and the gate starts acting erratically. A homeowner shouldn’t have to learn that the hard way.
• TSS1 and TSS1XP slide gate motors: limit switch drift. Slide gates depend on limit switches to know where to stop. On Ghost Controls slide units, those switches are mechanical and they gradually drift with temperature swings and vibration. The gate starts stopping six inches short, or slamming into the end post. We reset and re-secure the limits, then run the gate through a full cycle test under load. It’s a fifteen-minute adjustment that most owners don’t know exists.
• Battery backup systems: dead batteries that nobody notices until the power fails. Ghost Controls sells battery backup kits for their swing and slide openers, and most Kennedale homeowners install them after one bad storm leaves the gate stuck. But the batteries age out in three to five years, and the system doesn’t always tell you clearly. We test the battery under load during a tune-up and replace it before the next power outage, not after.
• Remote receiver range loss: corroded antenna connections. A Ghost Controls opener that only works from twenty feet away isn’t a remote problem, it’s usually a corroded antenna or a loose coaxial connection at the board. North Texas humidity and temperature swings accelerate the corrosion. We clean or replace the connection, and range comes back to normal. It’s one of those fixes that takes longer to explain than to do.

Our Ghost Controls Gate Motor & Opener Process

Every Ghost Controls job in Kennedale follows the same unhurried sequence, whether it’s a swing arm replacement or a slide motor rebuild.

1. 1
   Call and describe the symptom. We answer the phone. You tell us what the gate is doing or not doing. We give you a straight answer about whether it sounds like a board, a motor, a gear, or a power issue.
2. 2
   On-site diagnosis. A uniformed, background-checked technician arrives, tests the system section by section: power to the board, output to the motor, mechanical movement of the arm or slide carriage. We find the failed part before we quote a dollar.
3. 3
   Parts decision: OEM or better aftermarket. For boards and receivers, we use Ghost Controls OEM parts. For wear items like plastic gears, we use the aftermarket part when it genuinely outlasts the original. You hear the reasoning before any work is approved.
4. 4
   The repair, done once. We replace what failed, adjust what was working loose, and re-secure what was rattling. Then we cycle the gate through open and close under load, not just on a test bench.
5. 5
   Paperwork and the 90-Day Done Right Promise. You get a written guarantee on the work, no fine print. If it’s not right, we come back and make it right. No arguing, no forms, no phone tag.
6. 6
   Cleanup. We leave the gate area the way we found it, or cleaner. The gate closes like it did when it was new, and you don’t think about it again.

What Ghost Controls Gate Motor & Opener Costs in Kennedale

Here’s what Ghost Controls work typically runs in Kennedale. These are honest ranges for common jobs, not teaser prices.

• Swing arm actuator replacement (AXDP/AXD series): $380-$650 per arm, including the arm, installation, and travel adjustment.
• Control board replacement (R416L/R430L): $320-$520, OEM board, surge protection check, and full system test.
• Slide motor replacement (TSS1/TSS1XP): $680-$980, motor unit, limit setup, and chain/belt tension adjustment.
• Battery backup replacement: $190-$330, battery and load test under simulated power failure.
• Full diagnostic service call: $89, credited toward the repair if you proceed.

What moves the price: gate weight and length, whether the post mounts are still solid, and whether the job is a straightforward swap or requires welding and fabrication. Every estimate is free. The price we quote is the price you pay, agreed before a single bolt is turned. Call (817) 286-7391 for a written quote on your specific system.

Why Kennedale Homeowners Call Ironworks Gate Co. for Ghost Controls Work

We’ve been serving this area since 1984, and most of our Ghost Controls customers found us the way people in Kennedale find things: a neighbor’s gate stopped working, we fixed it, and the neighbor told two more neighbors. That’s how a company lasts 42 years in one place.

We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters more than it sounds. A technician who only knows one brand reaches for the wrong solution when the problem crosses brands, and gate problems do. The tech who arrives at your Ghost Controls gate has likely seen the same failure on a LiftMaster last week and a Mighty Mule the week before. That experience means the correct fix on the first visit, not a guessing game billed by the hour.

We stand behind every job with the 90-Day Done Right Promise, in writing. Most jobs are completed in a single visit. A live person answers the phone 24 hours a day, seven days a week, not a voicemail tree. And we treat your property the way we would treat our own mother’s house, because our technicians are background-checked and uniformed, and they carry the K.E.Y.S. code on every job: Krafted right, Every time, Your home first, Standing behind it.

FAQs