Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Kennedale Owner’s Guide

We repair and replace Ghost Controls keypads and intercoms across Kennedale, and most jobs are done in a single visit with parts on the truck. An installed replacement keypad typically runs $185 to $320 depending on the Ghost Controls model, and intercom replacements usually fall between $275 and $450 when tied into an existing gate operator. You’ll know the part has failed when the keypad stops accepting codes, the intercom quits ringing the house, or buttons work intermittently after years of Texas sun and rain. We stock Ghost Controls-compatible keypads for the most common residential swing and slide gate systems in the area, and we quote the full installed price before we turn a single screw.

Call (817) 286-7391

What brings most Kennedale homeowners to call us isn’t a complete failure. It’s the slow decline: the code stops working after a hard rain, the intercom speaker gets crackly, the keypad lights up but won’t send a signal. Those are the early warnings. Here’s what to know before you reach for a screwdriver.

Which Ghost Controls Models This Applies To

Ghost Controls makes a few distinct keypad styles, and they’re not all interchangeable. The most common units we see in Kennedale are the AXPB wireless keypad, the AXDP dual-gate keypad, and the wired keypad that connects to the GTO/Ghost Controls control board on older systems. The wireless models are easier to swap, but the wired keypads require matching the wire terminal block to the opener’s accessory board. Ghost Controls sells this exact part both as an OEM unit and under the GTO brand name on older stock, and the two usually play fine together, but the wireless frequency must match the receiver in your gate opener. On any Ghost Controls system installed before roughly 2008, that receiver is often a separate GTO unit, and mixing parts without checking the frequency means the new keypad won’t learn in, and you’ll think the whole opener is dead when it isn’t.

We’re an independent gate service company, not affiliated with Ghost Controls. That matters because our recommendation isn’t tied to pushing OEM labels. For keypads, we generally recommend the OE part when the opener is still under its original board, because Ghost Controls’ frequency hopping is proprietary and the aftermarket “universal” keypads cause more frustration than they save. For intercoms, a quality aftermarket unit from DoorKing or Linear often works better on a ranch gate line, but the wiring run and the house-side handset have to be checked before we’ll promise that.

Every Ghost Controls keypad has a label inside the battery compartment with a part number. Take a photo of that label before you call: it tells us in five seconds which keypad and receiver set you have, and it spares everyone the guesswork.

Signs Your Ghost Controls Keypad or Intercom Is Failing

• Buttons work only when pressed with force, or not at all. Texas heat and UV exposure crack the rubber membrane behind the keys. Once the membrane splits, moisture enters and the contact traces corrode. This isn’t a battery issue; it’s a failed seal.
• The code is accepted, but the gate doesn’t move. The keypad is sending a signal, but the receiver in the operator isn’t pairing with it. We see this a lot after thunderstorms or power surges in Kennedale. Sometimes it’s a blown receiver fuse on the control board, not the keypad itself.
• The intercom rings the house, but the voice is garbled or silent. Usually it’s a failing speaker cone or a corroded wire nut at the pedestal. Ants love to build nests inside the pedestal housing, and that’s a bigger problem on the south-facing side of any driveway.
• Cold mornings make the keypad go dead, and it returns in the afternoon. Condensation inside the sealed case shorts the board when the temperature swings. We see this pattern every winter from October through March in Kennedale mornings.
• One particular button stops registering while the rest work. That’s a broken trace on the circuit board under that specific key, not a programming problem. Reprogramming won’t fix it; replacement will.

Replacement Cost & What’s Included

Here’s what a Kennedale homeowner should expect for Ghost Controls keypad and intercom replacement, installed and backed by our written 90-Day Done Right Promise:

• Single wireless keypad replacement (AXPB): $185 to $260 installed.
• Dual-gate wireless keypad (AXDP): $225 to $320 installed.
• Wired keypad replacement (older GTO/Ghost Controls boards): $210 to $290 installed, depending on wire condition.
• Intercom replacement (basic pedestal unit): $275 to $350 installed.
• Intercom replacement (multi-station or long wire run): $350 to $450 installed.

The range comes down to two things: how difficult the existing wiring is to access, and whether the receiver on the opener needs to be re-paired or replaced at the same time. The parts price is the parts price; the labor is the labor, and we tell you both before we start. Every estimate is quoted and agreed before any work begins, so the invoice matches the number you approved. We don’t hand a bill with a surprise on it. Every Ghost Controls keypad and intercom we install carries the same written 90-Day Done Right Promise: if it’s not right, we come back and make it right, no arguing, no paperwork.

Standing offers: $50 off any repair over $250, free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (817) 286-7391 for an exact quote; estimates are free.

DIY or Call Us?

There are two things a homeowner can safely check before calling, and both take two minutes. First, pop the keypad cover and check the batteries. Ghost Controls keypads eat batteries faster than expected in Kennedale because the heat shortens battery life, and a dead battery mimics every symptom of a dead keypad. Second, make sure the opener’s breaker and the keypad’s power source haven’t tripped. Beyond that, we recommend stopping. A wired Ghost Controls keypad carries low-voltage current from the opener’s control board, and shorting the wrong wire can fry the main board itself, which turns a $250 keypad job into an $800 board replacement. The same goes for intercoms, especially on gates that share a line with a vehicle loop detector.

If the gate’s not working right, it’s not done. That’s the standard we work to. Call (817) 286-7391, and Victor Salinas or one of our background-checked technicians will be straight with you about whether it’s a keypad, a receiver, or something else entirely. Trained on nine gate-automation brands, including Ghost Controls, LiftMaster, Mighty Mule, and DoorKing, we fix the right part the first time.

FAQs

Call Ironworks Gate Co. for Ghost Controls Keypad & Intercom Repair in Kennedale

If your Ghost Controls keypad has stopped taking codes or your gate intercom has gone silent, call us at (817) 286-7391. A live person answers, at any hour, not a recording. We’ll give you a straight diagnosis over the phone most of the time, and we’ll show up when we say. Serving Kennedale and nearby areas for over 42 years, we take the same care with your gate that we would with our own. Upfront pricing, settled before the work starts, and a written 90-Day Done Right Promise on every job. Done right, and backed in writing.

Written by Victor Salinas, Owner & Gate Repair Specialist, Ironworks Gate Co. at Ironworks Gate Co., serving Kennedale and nearby areas.