Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Arlington, TX | Ironworks Gate Co.
Ghost Controls gate repair in Arlington means diagnosing a controller fault or a stripped gear, but it also means knowing what the Blackland Prairie clay is doing to the post that arm hangs on. We’re Ironworks Gate Co., an independent Ghost Controls service provider, and we repair these openers across Arlington every week. Victor Salinas grew up in Kennedale, trained at Tarrant County College’s Southeast Campus right here in Arlington, and has been fixing gate systems in Tarrant County for decades. Call us at (817) 286-7391 and a live person picks up, day or night.
Why Arlington Residents Choose Us for Ghost Controls Service
Ghost Controls openers are popular in Arlington for a reason. The AXDP dual-gate kits and the TSS1 solar swing arms fit a lot of our ranch-style driveways and the ornamental gates in places like Viridian. But the brand has its quirks, and the owner’s manual doesn’t mention Arlington’s soil. Our techs handle Gate Repair in Arlington on Ghost Controls systems every week, from diagnosing controller faults in the AXDP and TSS1 lines to replacing stripped gears in the linear arm models, with no manufacturer affiliation. We know these units from field experience, not from a training binder. We’re also the shop that keeps OEM rebuild kits and RAL 9005 touch-up paint on the truck because Arlington HOAs tend to notice a mismatched finish before the gate even cycles. When you call, you get a background-checked, uniformed technician who will quote the price before any bolt gets turned. The work is backed by our written 90-Day Done Right Promise. If the gate’s not working right, it’s not done.
Our Ghost Controls sales & service work spans everything from hinge and post repair to full motor swaps. We’ve handled more TSS1 limit-switch drift than most shops see in a decade.
Common Ghost Controls Gate Repair Problems We Solve in Arlington
- Controller relay failure after spring thunderstorms. Arlington sits in a storm corridor, and a power surge from a nearby ground strike can take out a Ghost Controls board in seconds. We see it every season. We test the controller first, and we don’t sell a whole new kit when a board-level repair or OEM controller swap fixes it.
- Limit switch drift on TSS1 arms. This one is tied directly to Arlington’s clay. When a gate post shifts a half-inch between wet and dry seasons, the arm’s travel changes just enough that the limit switch sends a false stop. Gates rebound, stall mid-travel, or grind. We reset the limits and address the post movement so the problem doesn’t repeat next season.
- Gearbox stripping in DSL1 linear motors. When a gate binds against a sagging post or a swollen wood frame, the motor keeps pushing until the gearbox gives. Arlington’s wet-dry cycle makes it worse. We replace the gear set with OEM parts and correct whatever caused the bind in the first place.
- Battery backup failure on solar kits. Ghost Controls solar systems rely on SLA cells, and Arlington’s 100°F summers cook them. We’ve replaced plenty of these batteries in August. When the OEM cells are priced unreasonably, we’ll fit a quality aftermarket SLA and save you the difference, without sacrificing the charging profile.
- Post movement and hinge stress on double swing gates. Ghost Controls AXDP kits run two arms on a dual gate, and when one post heaves even slightly, the two arms fight each other. That’s an Arlington problem more than a Ghost Controls problem. We reset the post with a deeper footing and recalibrate both arms so they move together.
Ghost Controls Service in Arlington: What Local Conditions Mean for Your Equipment
Experienced Arlington gate techs know that resetting a leaning post in the same hole with the same concrete depth is a waste of time on Blackland Prairie clay. The heave returns by the next wet season. Arlington sits squarely on that expansive clay, which swells in wet weather and cracks in drought, pushing gate posts out of plumb and racking frames even on installations less than five years old. For Ghost Controls owners, this isn’t a theoretical issue. A TSS1 arm mounted to a post that moves is going to drift limits, bind, or shear a gear, no matter how well the opener itself was built. The fix is a deeper bell-bottom footing or a helical pier anchor, a technique that rarely comes up in sandy-soil markets like Gulf Coast cities but is standard practice here. We’ve done it on gates along Green Oaks Boulevard and in the subdivisions east of Collins. It’s not the cheapest repair, but it’s the one that lasts. We’d rather sell you the right fix once than a band-aid three times.
Ghost Controls Models & Products We Service in Arlington
We service every Ghost Controls line you’re likely to have on an Arlington driveway. The AXPD and AXDP dual-gate controller kits we see on double swing gates across the city. The TSS1 and TSS1XP heavy-duty solar swing openers are common on the ornamentals in HOA neighborhoods where running conduit is expensive. The DSL1 and DSL1XP linear driveway openers show up on sliding gates, and the DSL5 heavy-duty linear actuator handles oversized gates that a smaller motor can’t push. We keep genuine Ghost Controls replacement gears, controllers, and arm assemblies in stock for faster turnaround, and we use OEM parts where limit switch and force calibration matter. If the original unit is over eight years old and the post movement is severe, we often recommend our Gate Installation in Arlington with a current DSL1 kit rather than nursing a worn gearbox. We’ll tell you straight which path makes sense, and the price is agreed before we order anything.
Ghost Controls Service Pricing in Arlington
Most Ghost Controls repairs in Arlington fall into a few predictable brackets. A service call to diagnose a Ghost Controls opener runs $89 to $129, and we apply that amount to the repair if you proceed. Board-level controller repairs are $225 to $520. Gearbox replacements in a TSS1 or DSL1 arm run $310 to $680, depending on the arm model. A full replacement linear swing arm installed is $950 to $1,400, with the DSL1 kit sitting in that middle range. Battery replacements on solar systems run $95 to $220. Post resetting with a helical pier anchor starts around $450 and depends on the post and access. Every quote is written, and the price is settled before we turn a single bolt. If a quote seems high, we’ll offer a free second opinion on any written estimate you have from another outfit. Call (817) 286-7391 and we’ll schedule a service visit, no guesswork.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Arlington
Heavy rain in Arlington doesn’t usually kill a Ghost Controls opener on its own. What it does is saturate the Blackland Prairie clay around your posts, which then swells and shifts the post. A shifted post binds the gate, which overloads the arm, and the opener either faults out or damages a limit switch or gear. We diagnose the opener and check the posts on the same visit, because fixing one without the other leaves you calling again next spring. Call (817) 286-7391 for a diagnosis that looks at the whole gate, not just the motor.
Yes. Grinding or slipping in a DSL1 or DSL1XP linear arm is almost always a stripped internal gear, and we rebuild those with OEM gear sets. We also check the gate’s track and posts while we’re there, because a Gate that is still binding will strip the new gear just as fast. The repair is typically handled in one visit, and we stand behind it with our 90-Day Done Right Promise.
It shortens their life considerably. SLA batteries degrade faster when they sit in 100°F heat for months, which is Arlington from June through September. We replace them when they’ve dropped enough capacity to leave the gate unresponsive after a cloudy stretch. If you’re replacing batteries every two seasons, we’ll talk with you about battery placement and whether a slightly larger enclosure would help. For an exact quote, call (817) 286-7391 and we’ll check what’s in the box.
Possibly, but don’t assume it until it’s tested. A nearby lightning strike can spike the board, and we’ve replaced our share of AXDP controllers after Arlington storms. We test the board, the receiver, and the arm in sequence before quoting. If the board is gone, we’ll fit an OEM replacement and get the gate running the same day in most cases. Call (817) 286-7391 and we’ll walk through it with you.
Yes. Arlington’s Viridian and other master-planned communities enforce HOA covenants that require matching black powder-coat finish on any repaired or replaced gate components. We keep a RAL 9005 touch-up kit on the truck, and for larger pieces we coordinate with a local powder-coat vendor. The goal is a repair the HOA won’t flag and the homeowner won’t notice. That’s the whole point of matching finish correctly.
Service Areas Near Arlington
Our trucks run daily through Arlington and the surrounding communities. We also provide Arlington service area coverage for every neighborhood in the city, plus Ghost Controls service in Everman and Ghost Controls service in Kennedale. We handle houses in Forest Hill, Mansfield, and Rendon as well.
Book Your Ghost Controls Service in Arlington Today
If a Ghost Controls opener is down on your Arlington gate, call (817) 286-7391. We answer live, 24 hours a day, seven days a week. We’ll schedule the visit, diagnose the problem on site, and give you a written price before work starts. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington since 1984.