Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
Gate installation in Benbrook runs $2,800 to $11,500 for most residential work, with ranch and estate gates on acreage properties typically landing between $6,500 and $18,000 depending on width, weight, and power access. Most standard swing gate installs are completed in one to two days, while solar-powered systems on long lakefront or pasture driveways take two to three days with trenching and footing work. We’re the crew that understands Benbrook’s clay soil, horse properties, and wide pipe-rail gates. Call (817) 286-7391 for a free measure and a written price before any work begins.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Installation Company
Benbrook isn’t a typical Fort Worth suburb. Drive south of I-20 toward Benbrook Lake and the lots open up, the driveways get longer, and the gates get heavier. We’ve worked this area long enough to know the difference between a quarter-acre lot off Winscott Road and a five-acre equestrian property off Stevens Drive. That local knowledge shapes everything we do, from footing depth to operator sizing.
Our Gate Installation team has built a strong reputation in Benbrook for showing up when promised, quoting a square price, and standing behind the work in writing. Homeowners here tend to have been in their homes twenty years or more. They’ve dealt with contractors who cut corners. They don’t want a bargain. They want a gate that still swings plumb through three wet-dry cycles, and a company that answers the phone if it doesn’t.
Dispatch runs from our Dallas-Fort Worth office, with crews scheduled into Benbrook throughout the week. A live person answers every call, day or night, at (817) 286-7391. You won’t get a voicemail tree.
Our Gate Installation Services in Benbrook
Driveway Gate Installation
Driveway gates in Benbrook run the full range: lightweight aluminum single-swing gates on 1960s ranch homes near the older core, to heavy dual-swing pipe gates on multi-acre parcels out toward the lake. We size the operator to the gate, not the other way around. A 14-foot tubular steel gate on a caliche driveway needs a different motor than a 10-foot aluminum gate on a concrete pad off Chapin Road.
Pedestrian Gate Installation
Pedestrian gates get overlooked until they sag and drag. In Benbrook’s black clay, a shallow footing will heave a pedestrian gate post out of line within a season or two. We set footings below the shrink-swell zone and use welded steel frames where the soil is active. That’s the difference between a gate that latches for twenty years and one that needs shimming every spring.
Sliding Gate Installation
Sliding gates make sense on Benbrook properties where a swing gate would arc into a hill, a drainage swale, or a fence line. They’re also the right call for wide driveway openings where dual-swing gates would put too much load on the posts. We install cantilever and V-track sliding gates with operators sized for the gate’s actual weight, including heavy ranch gates on the acreage parcels south of town.
Swing Gate Installation
Swing gates are the most common install in Benbrook, and the most vulnerable to our soil. When a hinge post heaves, the gate binds, the operator strains, and the latch stops lining up. We set deep footings, use heavy-wall posts, and fit operators with enough torque to move a full gate through a north wind off Benbrook Lake. Done right, a swing gate should feel effortless.
Double Gate Installation
Double gates, also called dual-swing or bi-parting gates, are standard on Benbrook’s horse properties and larger lots. Two leaves, two operators or one master-slave pair, and a center stop. We’ve installed enough of these to know that the weak point is almost never the motor. It’s the post. In this soil, a 16-foot opening needs posts set deeper than most installers out of Fort Worth would bother with. We do.
Security Gate Installation
Security gates for Benbrook homes often mean a steel-panel or pipe-rail gate with a keypad, intercom, or vehicle detection loop. We handle the full power run and Benbrook Gate Access Control wiring, including solar options for gates set far from the house. Every automated gate gets the entrapment protection Benbrook code requires: photocells, contact edges, and a properly adjusted close force.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We’re trained and equipped on nine gate-automation brands, and in Benbrook we install and service LiftMaster, Mighty Mule, FAAC, and BFT most often. If you have an existing opener that’s giving out, we can usually match or upgrade it without replacing the whole gate. We keep common parts on the truck: control boards, limit switches, remote receivers, photocells, and solar charge controllers. For Gate Parts & Welding - Benbrook customers, that means fewer return trips and less waiting on a part to ship.
Common Gate Installation Problems We See in Benbrook Homes
- Shallow footings in expansive clay. Benbrook sits on Tarrant County black clay, also called Vertisol. It swells after spring rains and cracks open in summer droughts. A footing set at 24 inches will heave. A footing set at 36 to 42 inches below grade, below the active shrink-swell zone, generally won’t. We see the shallow-footing failure most on older ranch homes and lake-area properties.
- Undersized operators on wide pipe gates. A heavy dual-swing tubular-steel gate on a horse property needs a real linear actuator or a heavy-duty swing operator. A light residential operator rated for a 300-pound gate will stall on a 700-pound ranch gate, especially in cold weather when the grease thickens and the metal contracts. We size the opener for the actual gate leaf weight, and add margin.
- No power at the gate location. A long caliche driveway off Lakeside Drive or a pasture entrance a quarter-mile from the house makes trenching for mains power expensive and disruptive. We’ve installed solar gate openers on more than a few of these, sized to the gate weight and Benbrook’s winter sun angles, with battery capacity for ice-storm stretches. This is one of the most practical upgrades an acreage owner can make.
- Sagging gates after a dry summer. When the clay dries and shrinks, hinge posts can lean outward, and the gate leaves drop at the latch end. Homeowners sometimes shim the hinges or adjust the latch. The honest fix is resetting the posts deeper, and on steel gates, checking the diagonal brace or frame welds. We’ve straightened gates in Benbrook that other companies had written off as replacements.
Pricing for Gate Installation in Benbrook, TX
Here’s what homeowners in Benbrook can expect to pay for installed gates, based on the work we’ve priced across this market:
| Gate Type | Typical Benbrook Price Range |
|---|---|
| Single pedestrian gate, steel or aluminum | $800 - $2,200 |
| Single driveway swing gate, aluminum | $2,800 - $5,500 |
| Single driveway swing gate, steel | $3,800 - $7,000 |
| Double swing gate, tubular steel (horse property / acreage) | $6,500 - $12,500 |
| Double swing gate, heavy pipe-rail ranch gate | $9,000 - $18,000 |
| Sliding gate, including track and operator | $4,500 - $10,000 |
| Solar gate opener, installed (add-on) | $1,800 - $3,400 |
| Mains-powered operator, installed (add-on) | $1,400 - $2,800 |
The biggest cost drivers in Benbrook are gate width and weight, footing depth in clay, and whether the site gets power from the house or from solar. Every price is quoted and agreed in writing before any work starts. Free estimates to all of Benbrook, including Gate Installation in Benbrook near the lake and out toward the county line. We don’t start a single bolt until the number is signed.
Field Notes From Benbrook
Benbrook’s heavier gate profile shows up most clearly south and west toward Benbrook Lake, where equestrian properties and large-lot ranch homes dominate. These aren’t decorative driveway gates. They’re working gates: 14- and 16-foot openings sized for horse trailers, hay trucks, and RV access. The posts are pipe steel, the leaf weight is often double what a suburban aluminum gate weighs, and the operator has to handle that load twice a day, year-round. A company that only installs light residential gates in Fort Worth proper won’t have the right equipment or the right instincts for this kind of work.
We installed a dual-swing 16-foot tubular-steel gate on a caliche-and-clay driveway off Lakeside Drive, where the hinge post had heaved over three inches in one season, requiring Gate Repair - Benbrook expertise. Our crew set a deep post footing below the shrink-swell zone, fitted a Linear actuator with a loop detector and safety photocells, and added a solar gate opener because running mains power to the far side of the property was impractical. Six months and two wet-dry cycles later, the gates still swing plumb without binding.
That job captures the Benbrook difference. In a standard Fort Worth subdivision, you trench power 20 feet from the garage and bolt a lightweight operator onto a powder-coated aluminum gate. Out here, the driveway is 300 feet of caliche, the gate weighs 600 pounds, the soil is moving under the post, and the only power source on the property is the house. Different job. Different plan. Same standard.
Winter ice storms, which hit the Fort Worth-Benbrook corridor harder than areas further south, add another layer. Exposed gates on lakefront properties take wind off the water. Motors seize, hollow-tube members crack, and a gate that worked fine in October binds up in February. We push clients toward solid-bar or heavy-wall tube on exposed lakefront gates, and we use cold-weather-rated grease on operators for Benbrook installs. It’s a small step that prevents a big headache.
We Also Serve Cities Near Benbrook
While this page is written for Benbrook homeowners, our crews also cover nearby Tarrant County communities. If you’re in Kennedale, Arlington, Everman, or Forest Hill, the same team, the same pricing, and the same 90-Day Done Right Promise apply. Call (817) 286-7391 and we’ll schedule a free measure at your property.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Benbrook
Gate posts in Benbrook’s expansive black clay should be set 36 to 42 inches deep, below the active shrink-swell zone, with a concrete footing that extends below that depth. Posts set at 24 inches, which is common in less active soils, will heave within a season or two. On heavy double gates near Benbrook Lake, we go deeper and add a wider footing to resist the seasonal movement. Call (817) 286-7391 and we’ll assess your soil and gate weight before quoting.
Yes, solar gate openers work on heavy ranch gates in Benbrook, provided the panel, battery bank, and operator are sized correctly. A 16-foot tubular-steel gate needs a larger panel and a bigger battery than a light aluminum driveway gate. We’ve installed solar systems on wide pipe gates throughout the acreage south of town, and they hold up through ice storms and short winter days when they’re sized properly. The key is not undersizing the system to save a few hundred dollars.
For a wide double gate on a Benbrook horse property, you need a heavy-duty linear actuator or a commercial-grade swing operator rated for each leaf’s actual weight, plus a master-slave control setup if the leaves operate independently. Light residential operators will stall under a 600-pound pipe gate. We specify the operator after measuring the gate, not from a catalog photo. Estimates are free.
Yes. Automated gates in Benbrook require entrapment protection under UL 325 and local code: photocells at a minimum, and contact edges or a monitored safety system for gates that open across pedestrian paths. We install this on every automated gate, no exceptions, and we test the close force so the gate reverses on contact. This isn’t an upsell; it’s the legal minimum and a basic safety requirement for your family and anyone who drives onto the property.
Your gate sags after a dry summer in Benbrook because the black clay shrinks as it dries, allowing the hinge post to lean outward and the gate leaves to drop at the latch end. This is the most common gate failure we see here. The fix is resetting the post below the shrink-swell zone and, on steel gates, checking the bracing and welds. Shimming the hinges only postpones the problem. Call (817) 286-7391 for a straight answer and a written price.
Get a Free Estimate for Gate Installation in Benbrook
If you’re ready to replace a sagging gate or install a new one on your Benbrook property, start with a phone call. We’ll set a time to measure, talk through your options, and hand you a written price that covers the gate, the operator, the footings, and the work. No surprises on the bill. No pressure to sign.
Call (817) 286-7391 any time. A live person answers. We’ll be there when we say, and we’ll stand behind the work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook and surrounding communities.