Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Kennedale?
A standard driveway gate installation in Kennedale typically ranges between $3,200 and $8,500, depending on the material, the complexity of the masonry, and the type of automation system required. For a basic manual swing gate, you might see costs on the lower end of that spectrum, while custom ornamental ironwork with high-end dual-gate automation will move toward the upper range.
Every property in Kennedale presents unique challenges, from the slope of your driveway to the specific soil conditions near the street. Because we have been installing gates here since 1984, we know exactly what it takes to build a system that stands up to Texas heat and local moisture. If you are ready for an exact number for your specific driveway, call us at (817) 286-7391 for a free estimate.
Gate Installation Cost Breakdown (2026)
When you look at a quote for a new gate, you are paying for more than just the metal. You are paying for the engineering, the concrete work for the footings, the electrical runs, and the calibration of the opener. We break our pricing down clearly so you know exactly what is included before we turn a single bolt.
| Project Component | Estimated Cost Range |
|---|---|
| Standard Manual Swing Gate (Installation Only) | $1,800 - $3,500 |
| Custom Ornamental Iron Gate (Single) | $2,500 - $5,000 |
| Driveway Gate Automation (Opener Hardware + Install) | $2,000 - $4,500 |
| Masonry and Column Repair/Installation | $1,500 - $4,000 |
| Access Control Systems (Keypads, Intercoms, Sensors) | $600 - $1,800 |
The total cost for your project is essentially the sum of these parts. If you have existing columns that are structurally sound, we can often mount directly to them, which saves on masonry costs. However, if your driveway is wide or has a steep incline, we may need to install heavy-duty rollers or specific dual-swing openers to ensure the gate operates safely without dragging or burning out the motor. We never guess on these costs; we provide a firm, upfront price before work begins.
What Affects Gate Installation Pricing in Kennedale
No two gate jobs are identical, even on the same street. We look at several specific factors when we provide an estimate at your home.
- Driveway Grade and Slope: Kennedale driveways that are not perfectly level require different hinge systems or gate heights to prevent the gate from hitting the ground during its swing. A sloped drive often requires more expensive, heavy-duty openers to push the gate uphill.
- Material Weight and Type: Wrought iron is heavy and requires robust hinges and substantial concrete footings to prevent sagging over time. Aluminum is lighter and easier on motors, but it does not offer the same security profile as steel.
- Automation Brand and Features: We work with nine major brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A simple keypad entry is significantly less expensive than an integrated smart-phone control system or a long-range receiver.
- Electrical Access: Does your gate location have power nearby? Trenching for electrical conduit from your home to the gate can add labor hours and material costs depending on the distance and the type of concrete or landscaping we have to cross.
- Soil Conditions: The soil in this part of Texas can be expansive. We ensure our footings are dug deep enough to bypass the shifting topsoil, which sometimes requires extra concrete and labor to ensure the gate stays plumb and level for years to come.
How to Save on Gate Installation
You do not need to cut corners to keep your project affordable. The best way to save is by choosing a reliable installer the first time. We see homeowners who try to save money by hiring a general handyman, only to spend more money later fixing uneven welds or burnt-out motors that were not installed to code.
We offer a few ways to manage your investment:
- Bundle Your Upgrades: If you are already installing a gate, adding a keypad or a modern opener at the same time is more cost-effective than adding them as a separate service call later.
- Use Our Second Opinion Service: If you have a written estimate from another company, we offer a free second opinion. We will tell you if the quote is fair or if you are being overcharged for unnecessary hardware.
- Senior and Veteran Discounts: We provide a permanent 5% discount for seniors and veterans. It is our way of saying thank you to those who have served our country and our community.
- Keep Your Maintenance Schedule: Once your gate is installed, keeping it tuned up prevents expensive emergency repairs. We offer an $89 seasonal tune-up that keeps your system running smoothly and avoids the high cost of a total system failure.
If you have questions about your specific project, call (817) 286-7391. Our team is ready to provide a straightforward, no-pressure estimate.
FAQs - Gate Installation Cost
How much does it cost to automate an existing gate in Kennedale?
Automating an existing gate typically costs between $2,000 and $4,500, depending on the weight of the gate and the brand of opener required. We must first ensure your current gate is balanced and swings freely, as a heavy or dragging gate will destroy a new motor within months. Call (817) 286-7391 for a free estimate to see if your current gate is a candidate for automation.
Is it cheaper to repair a gate or replace it entirely?
If the frame is rusted through or the hinges have pulled out of the brick columns, replacement is often the most cost-effective long-term choice. However, if the gate is structurally sound and only the opener or a few welds are failing, a repair is usually the better value. We provide honest advice on this; if we can save you money by repairing it correctly, we will tell you. Call us to schedule a review of your gate.
Does Ironworks Gate Co. offer financing?
We focus on providing upfront, transparent pricing so you know exactly what the job costs before we start, which helps our customers plan their budgets effectively. We do not use high-pressure sales tactics or hidden fees. For specific pricing on your gate project, call (817) 286-7391 to speak with us directly.
How long does a gate installation usually take?
Most standard gate installations are completed in one to two days, assuming the concrete footings have had proper time to set. We prioritize doing the job right over doing it fast, but we always give you a firm timeline before we start work at your home. Call us today to get on our schedule.
Can you match a gate style I saw online?
We specialize in custom ironwork and can replicate or design a gate that matches your vision. Because we have been in business for over 42 years, we have the experience to build gates that look great and function reliably. If you have a photo or a design in mind, call (817) 286-7391 and let us know what you are looking for.
Pricing reflects the Kennedale market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 286-7391.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.
What Our Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez