Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Kennedale?
Gate parts and welding repairs in Kennedale, TX, typically range from $180 to $650, depending on the severity of the damage, the type of gate system involved, and whether the repair requires structural steel work or simple component replacement. For a standard hinge weld or minor hardware replacement, homeowners often pay on the lower end of that range, while complex structural repairs or specialized motor-related welding may reach the higher end. We offer free estimates, and our team at Ironworks Gate Co. provides upfront pricing so you know exactly what the bill will be before a single bolt is turned.
If you have a gate that is sagging, dragging on your driveway, or failing to latch, the issue often starts with a single compromised weld or a worn-out hinge. We have served homeowners in Kennedale, TX, for over 42 years, and we have learned that ignoring these small signs leads to expensive motor failures later. When you call (817) 286-7391, you get a live person on the line who understands your gate system and can help you determine the most cost-effective path to getting it working again.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for gate service in Kennedale is determined by three factors: the specific parts required, the complexity of the welding process, and the time required to diagnose the issue. At Ironworks Gate Co., we believe in a square deal. We do not use “hidden fees” or surprise charges. The following table provides a realistic look at the costs you can expect for common gate services in our area.
| Service Category | Estimated Cost Range |
|---|---|
| Minor Welding Repair (Hinge/Bracket) | $180 - $320 |
| Major Structural Welding (Gate Frame) | $350 - $650+ |
| Gate Hinge Replacement (Pair) | $220 - $400 |
| Gate Arm/Actuator Repair or Alignment | $280 - $550 |
| Control Board & Electrical Troubleshooting | $300 - $700+ |
| Seasonal Gate Tune-Up | $89 (Flat rate) |
Please note that these ranges cover parts and labor. We do not provide “low-ball” quotes to get in the door only to raise the price once we are on-site. When we provide a quote, that is the price you pay. Our team is trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we stock parts for these specific systems, we are often able to complete the repair in a single visit, saving you the cost of multiple service calls.
What Affects Gate Parts & Welding Pricing in Kennedale
Every gate in Kennedale, TX, faces unique challenges. Our local climate and geography play a significant role in how long your gate components last. Understanding these factors helps explain why some repairs cost more than others.
- Soil Movement and Foundation: Much of the soil in Kennedale, TX, is prone to shifting. This movement can cause gate posts to lean, which puts immense stress on the hinges and the welds connecting them to the gate frame. If the post has shifted, simply re-welding the hinge is not enough; the post must be stabilized, which increases the scope and cost of the work.
- Thermal Expansion: Metal gates in North Texas expand and contract significantly with our extreme temperature shifts. Over time, this constant movement fatigues the steel and the weld beads. We often see cracks in older welds that have been subjected to decades of North Texas summers. Repairing this properly requires grinding out the old, fatigued material and re-welding with high-quality filler.
- The Complexity of the Automation System: A gate is only as smart as its control board. If your gate is not opening, the problem might be a simple weld, or it might be a sophisticated electronic issue within your LiftMaster, FAAC, or DoorKing system. Troubleshooting these proprietary circuit boards requires specific diagnostic tools and knowledge, which is why we invest heavily in training our team on all nine major brands we support.
- Accessibility of the Damage: If a gate is stuck in the closed position, we have to manually release the operator before we can even begin to assess the welding damage. If the damage is located in an awkward position, such as the top hinge of a tall estate gate, it may require additional equipment or a second technician to ensure the work is done safely and correctly.
- Quality of Materials: We do not use hardware-store grade hinges or light-duty steel. When we perform a weld, we use industrial-grade materials designed to withstand the weight of a heavy iron gate. Using the correct gauge of steel for a repair ensures that you will not have to call us back for the same issue in six months.
If you are unsure what is wrong with your gate, we offer a free second opinion on any written estimate. If you have been told you need a full replacement, give us a call at (817) 286-7391. We often find that a professional repair is a much more economical solution than a full gate replacement.
Why Professional Welding Matters for Your Gate
A gate is a heavy, moving piece of equipment. It is not just a piece of metal; it is a mechanical system under tension. When a weld fails on a gate, it is a safety hazard. We have seen homeowners attempt to patch a broken hinge with store-bought epoxy or a small, amateur weld, only to have the gate fall off its hinges or crush the gate arm.
Safety Warning: Please do not attempt to weld or repair high-tension components yourself. Gate systems, especially those with heavy iron or steel frames, can weigh hundreds of pounds. If a hinge fails while you are working on it, or if you accidentally trigger the gate motor while your hands are near the arm, the results can be serious injury. Our technicians are trained to secure the gate properly before any work begins. If you hear grinding, see visible cracks in the metal, or notice your gate sagging, please leave the repair to a trained professional.
At Ironworks Gate Co., we treat every weld as if it were on our own home. Victor Salinas, our owner, has instilled a culture of “Krafted right, Every time.” This means we clean the metal, we grind down the old welds, and we ensure the structural integrity of the joint before we finish. We do not just put a bead of metal over a crack; we fix the underlying structural issue that caused the crack in the first place.
Our Commitment to Kennedale Homeowners
We are not a franchise that treats Kennedale, TX, like just another zip code on a map. We have been part of this community since 1984. We know the local neighborhoods, we know the local gate styles, and we know that our neighbors value a job done right the first time. Our business is built on the idea that if you do good work, you do not need to spend money on fancy marketing or sales gimmicks.
Our 90-Day Done Right Promise is the keystone of our business. If we perform a weld or replace a part and it does not perform as expected, we come back and make it right. No paperwork, no arguing, no hassle. We stand behind our work because we know our technicians are background-checked, uniformed, and dedicated to the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. When you invite us to your home, you are getting the same care we would give our own mother’s house.
We are also proud to offer standing discounts for those who have served our country and our community. We provide a 5% discount for all seniors and veterans, always. If you have a gate issue, don’t wait for it to become a security risk. Call (817) 286-7391 today to speak with a live person who can help you solve the problem.
Understanding the Nine Brands We Service
One of the reasons we are the go-to Gate Parts & Welding in Kennedale specialist is our deep familiarity with the major automation brands. A gate is a complex machine, and knowing the nuances of the motor, the control board, and the safety sensors is critical.
- LiftMaster: We are highly experienced with LiftMaster operators. They are reliable, but they require precise programming. If your LiftMaster is failing, it is often a sensor or a logic board issue that we can diagnose quickly.
- FAAC: These are hydraulic systems that are powerful and durable. They require specific hydraulic fluid maintenance and seal checks. We know exactly how to service these to prevent leaks.
- BFT: Italian-engineered and very precise. We carry the specific parts required for BFT repairs, so you don’t have to wait weeks for shipping.
- Linear: A very common brand in Kennedale. We have seen every version of Linear gate opener, from the older models to the latest smart-enabled systems.
- Viking: Known for their high-performance motors. These are heavy-duty, and when they break, they need a technician who understands high-torque systems.
- Ghost Controls: These are often used for DIY-friendly installations, but they still require professional maintenance to keep the gate arms aligned and the control boxes sealed against the Texas humidity.
- DoorKing: The industry standard for many estate gates. We have extensive experience with the entire DoorKing line, including their sophisticated access control systems.
- Elite: We specialize in maintaining older Elite systems. These gates are built like tanks, and with the right parts, they can last for decades.
- Mighty Mule: We provide professional service for these systems, ensuring that the installation is robust enough for long-term daily use in the Kennedale climate.
If you don’t see your brand listed here, give us a call. We have worked on almost every gate system installed in North Texas over the last 42 years. Our home page contains more information about our full range of services if you are looking for more than just welding.
How to Save on Gate Parts & Welding
We understand that gate repairs are rarely planned. To help manage costs, we offer several ways to save:
- The Seasonal Tune-Up: For $89, we perform a full seasonal tune-up. This includes checking all welds, lubricating hinges, testing the motor force, and ensuring safety sensors are aligned. Catching a small weld crack during a tune-up is significantly cheaper than waiting for the entire gate to fall off the hinges.
- The $50 Repair Discount: We offer $50 off any repair over $250. This is our way of helping homeowners who have multiple small issues that need addressing at once.
- Free Second Opinion: If you have received a quote from another contractor that seems high or confusing, call us. We will come out, take a look, and give you our honest assessment for free. We are not afraid to tell you if a repair is fair or if you are being overcharged.
- Veteran and Senior Discount: We honor those who have served and those who have built our community. A 5% discount is applied to all services for seniors and veterans.
The best way to save money on your gate is to keep it maintained. A gate that is properly balanced puts less strain on the motor and the hinges, which prevents the very welding failures that lead to the most expensive repairs. Call (817) 286-7391 to schedule your tune-up or to discuss a repair.
FAQs - Gate Parts & Welding Cost
How much does it cost to fix a sagging gate in Kennedale?
Fixing a sagging gate usually costs between $250 and $550. The price depends on whether the sag is caused by a loose hinge that needs to be re-welded or if the gate post itself has shifted and requires stabilization. We always assess the root cause of the sag so we can fix it permanently.
Can you weld a gate hinge without taking the gate down?
In many cases, yes, we can perform a repair on-site without removing the entire gate. However, for a proper, structural weld that will last, we often need to support the gate with jacks and specialized equipment. We will assess the safety and feasibility of an on-site repair during our initial inspection.
Is it cheaper to repair or replace my gate motor?
In most cases, a repair is significantly cheaper than a full replacement. A motor repair typically costs between $300 and $700, while a full replacement can run into the thousands. We are honest about the condition of your motor; if we believe it is not worth repairing, we will tell you, but we will always explore the repair option first.
How quickly can you come out to fix my gate?
We understand that a broken gate is a security issue. We prioritize emergency repairs and often offer same-day or next-day service. Because we have a live person answering the phone 24 hours a day, 7 days a week, you don’t have to wait until Monday morning to get your gate issue addressed. Call (817) 286-7391 to see our current availability.
Do you charge for estimates?
No, we provide free estimates. We believe that you should know exactly what the job will cost before we start. We do not use “trip charges” to get to your door; we provide an upfront, transparent price for the work required.
Pricing reflects the Kennedale market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 286-7391. Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.
What Our Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez