Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Richland Hills
Most gate repairs in Richland Hills are not mystery jobs. They are 1960s hinge posts gone soft at the base, chain-link frames racked out of square by North Texas clay, and welds that finally let go after fifty years of trash-truck clearance. Our Gate Parts & Welding team handles those exact problems every week across Richland Hills, from hinge replacement and post setting to custom welding on frames that were never built for the alley traffic they see today. Call (817) 286-7391 and you will reach a live person who can tell you what the fix involves and what it will cost before we ever roll a truck.
Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Parts & Welding Company
We have worked enough rear alleys in Richland Hills to know what is behind the gate before we see it: a mid-century wood post, a set of original strap hinges, and a gate that has been sagging for years. Homeowners here do not want a sales pitch. They want someone who knows that the alley gate off Rufe Snow Drive has been taking abuse from city utility trucks since the Johnson administration and who will tell them honestly whether the post can be saved or needs to be reset in a deeper footing.
Victor Salinas founded this company on a simple standard: do the job the way you would do it for your own mother. That means background-checked, uniformed technicians, a written 90-Day Done Right Promise on every job, and a live person answering the phone 24 hours a day. When a Richland Hills homeowner calls about a gate hanging by one hinge, we treat it like the urgent problem it is, not a sales appointment. Dispatch to Richland Hills is coordinated from our Dallas-Fort Worth office, and crews know the streets here well enough to find an alley entrance without being talked in.
Our Gate Parts & Welding Services in Richland Hills
Hinge Replacement
In Richland Hills, hinge replacement is rarely just swapping hardware. The original strap hinges on 1960s alley gates were screwed into cedar or pine posts that have now spent six decades absorbing North Texas rain, clay moisture, and summer heat. When those screws strip out, the gate drops, the latch misses, and every close grinds metal on concrete. We replace the hinge, yes, but we also address why it failed: a post that has rotted at the screw line, a frame that has twisted, or a gate that was hung too low for the alley grade in the first place. Done right, the new hinge outlasts the original.
Post Replacement
This is the single most common job we do in Richland Hills, and the clay is the culprit. Original 1950s post footings were shallow, poured when nobody was thinking about Blackland Prairie soil swelling with spring rain and shrinking hard in August. The post heaves, tilts, and eventually splits. We pull the old post, dig a deeper footing, set a new steel post in concrete, and re-hang the gate plumb. The gate works in June and in September, and the latch lines up both months.
Rail Repair
Chain-link gate frames in Richland Hills take a beating from heat warping and decades of being dragged across shifting ground. We straighten or replace bent top and bottom rails, repair popped tension bands, and weld cracked joints at the corners. If the frame has twisted beyond practical repair, we will tell you that plainly and quote a replacement panel instead of patching something that will sag again in a year.
Custom Welding
Some gates are worth saving because nothing made today matches the original steel. Our welders handle cracked hinge welds, torn chain-link fabric, broken latch mounts, and custom reinforcement on gates that have outlasted the house they were hung on. For wider gates on Richland Hills acreage, we weld internal gussets at the mid-rail so the panel stops twisting under its own weight. That is the difference between a gate that works for five more years and one that needs the latch adjusted every spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
When a Richland Hills homeowner has an automated gate that will not open, it is usually a Mighty Mule, LiftMaster, or FAAC operator on the post or under the driveway. Our technicians are trained and equipped on all three, plus BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, and we carry common parts in the truck so most repairs are finished in one visit. You do not wait on a part order to cross the country. The job gets done the day we arrive, at a price you agreed to before the first bolt came off.
Common Gate Parts & Welding Problems We See in Richland Hills Homes
- Hinge pull-out from rotted wooden posts. Decades of alley traffic from trash trucks and utility crews have worked the original screws loose, and the gate ends up hanging by one hinge while the post splits at the screw line.
- Posts heaving out of plumb. The Blackland clay under Richland Hills swells with spring rain and shrinks through summer drought, tilting shallow 1950s footings until chain-link frames rack and scrape the alley concrete.
- Cracked and broken welds on original frames. The heat of a North Texas summer, repeated slamming, and fifty years of metal fatigue take their toll on old welds, especially at the lower hinge where the gate carries its weight.
- Solar gate operators going dead overnight. Driveway gates on the broader lots around Richland Hills often run solar operators without enough battery reserve for consecutive cloudy winter weeks, leaving the gate intermittently unresponsive.
Pricing for Gate Parts & Welding in Richland Hills, TX
Hinge replacement on a typical Richland Hills alley gate runs $90 to $180 per hinge, including the hardware and labor to set it properly. A full post replacement with a new steel post in a deeper concrete footing runs $350 to $650 depending on the gate size and how much of the old footing has to be pulled. Rail repair or replacement runs $60 to $220 per rail. Custom welding jobs run $95 to $140 per hour, and most small repairs like a cracked hinge weld or a broken latch mount finish in one to two hours. Every job is quoted and agreed before work starts, in writing, so the invoice matches the number on the estimate. Call (817) 286-7391 for a free estimate, and ask about the $50 off any repair over $250.
We Also Serve Cities Near Richland Hills
If you are in a neighboring Tarrant County city and your gate is giving you trouble, we cover Richland Hills plus Kennedale, Arlington, Everman, and Forest Hill. Same crews, same written guarantee, same live person on the phone.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Richland Hills
Your original post has likely rotted at the screw line after decades of absorbing moisture from Richland Hills clay and rain. The fix is usually a new steel post set in a deeper concrete footing, not another round of longer screws. We can replace the post, weld on adjustable hinge brackets, and re-hang the gate so it clears the alley grade properly. Call (817) 286-7391 for an exact quote.
Yes, if the existing operator has the capacity for the added weight. We can weld a wider gate with an internal gusset at the mid-rail so the panel does not twist, then confirm the operator’s duty cycle before hanging it. If the operator is too small, we will tell you that before any welding happens. Call (817) 286-7391 and we will measure and give you a written price.
The battery is almost always the problem, and on long driveways it is usually undersized for the duty cycle. We test the panel, battery, and charge controller in one visit, replace what is failing, and if the reserve is too small for consecutive cycles we will spec the correct battery so the gate stops going dead during cloudy winter weeks. Call (817) 286-7391 and ask for a solar diagnostic.
Most lower hinge cracks can be welded in place with the gate supported on stands, so the gate does not have to come off unless the frame itself is twisted. A typical weld repair on a cracked lower hinge takes one to two hours. Call (817) 286-7391 and we can tell you over the phone whether it sounds like an in-place fix.
You can replace just the drop-rod latch in most cases. The original latch is usually still functional, just seized from rust or misaligned from the post tilting. We replace or free the latch, align the post if needed, and the gate works again without a full replacement. Call (817) 286-7391 for a free estimate.
Call Ironworks Gate Co. for Gate Parts & Welding in Richland Hills
If your alley gate is sagging, your hinges are pulling loose, or you need a weld that will actually hold, call (817) 286-7391. A live person answers, 24 hours a day, every day. We will talk through what you are seeing, give you a straight answer and a free estimate, and stand behind the work with a written 90-Day Done Right Promise. That is the deal on every gate job we do in Richland Hills, and it has been for over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills and the surrounding Tarrant County communities.