Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Kennedale?
Most driveway gate repairs in Kennedale typically range between $175 and $550, depending on whether the issue stems from a minor sensor misalignment or a more complex motor replacement. For straightforward mechanical adjustments or welding repairs, homeowners usually pay on the lower end of that spectrum, while comprehensive board replacements or gear assembly repairs sit toward the higher end.
When you notice your gate struggling to open, or it stops halfway through a cycle, the issue often relates to the heavy wear our Texas climate puts on components. At Ironworks Gate Co., we have been serving Kennedale for over 42 years, and we have seen how the heat and humidity here affect steel and electronics differently than in other regions. We provide upfront pricing before we turn a single bolt, so you know exactly what the bill will be before the work begins.
If your system is acting up, please call us at (817) 286-7391. We answer our phones live 24 hours a day, 7 days a week, and we are ready to help you get your property secure again.
Gate Repair Cost Breakdown (2026)
We believe in a square deal. You deserve to know what you are paying for, and you should never be surprised by a final invoice. While every driveway gate in Kennedale has unique characteristics-from the weight of the wrought iron to the specific age of the opener-we have provided this breakdown to give you a clear expectation of local market rates.
| Service Type | Typical Cost Range |
|---|---|
| Routine Maintenance & Lubrication | $125 - $175 |
| Sensor Alignment & Wiring Repair | $175 - $275 |
| Welding & Hinge Repair | $225 - $450 |
| Circuit Board Replacement | $350 - $650 |
| Gate Opener Motor Repair/Replacement | $450 - $1,200+ |
These figures reflect the current labor and parts market in Tarrant County. When we visit your home, we provide a firm estimate based on the specific condition of your equipment. We specialize in nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which allows us to carry the correct parts for most jobs on our trucks. This efficiency helps us keep our costs predictable for our neighbors in Kennedale.
What Affects Gate Repair Pricing in Kennedale
Several factors influence the final cost of a gate repair. Because we have been in business since 1984, we understand that a gate is not just a piece of metal; it is a security device that needs to function reliably every single day.
- The Brand and Model of Your Opener: Parts for industry-standard units like LiftMaster or Elite are generally more accessible than proprietary parts for discontinued or obscure models, which can drive up the cost of a repair.
- Structural Integrity of the Gate: If your hinges have torn away from the post or the metal frame has rusted through, welding is required. This labor-intensive work costs more than a simple electronic adjustment.
- Electrical Complexity: Troubleshooting a short circuit or a faulty ground wire takes more time than swapping out a remote receiver. Our technicians are trained to trace these issues accurately to avoid unnecessary part replacements.
- Safety Compliance Needs: Modern gates require specific safety sensors (photo eyes) to meet current safety standards. If your older gate lacks these, or if they have failed, bringing the system up to code is a necessary cost to protect your family and guests.
- Accessibility of the Components: If your motor or control box is mounted in a difficult-to-reach location or has been overgrown by landscaping, the extra labor time required to access the equipment can impact the final price.
Safety is our priority. If you have a high-tension cable issue or a motor that is smoking or sparking, please stop operating the gate immediately. These components store significant energy and require a trained professional to handle safely. Call us at (817) 286-7391 to have a background-checked, uniformed technician evaluate the situation before you attempt any inspection yourself.
How to Save on Gate Repair
The most effective way to manage your gate repair costs is to catch small issues before they become expensive failures. A gate that drags on the driveway or makes a grinding noise is putting excessive strain on the motor, which will eventually lead to a much larger repair bill.
We recommend a seasonal tune-up to keep your system running smoothly. We offer an $89 Seasonal Tune-Up that covers a full inspection of hinges, sensors, and motor performance. This allows us to catch loose bolts or misaligned sensors early. We also offer a $50 discount on any repair exceeding $250, and we provide a 5% discount for all seniors and veterans as a thank you for your service and loyalty to our community.
If you have already received a quote from another company, we are happy to provide a free second opinion. We do not believe in high-pressure sales tactics. We simply want to ensure you are getting a fair price and a quality fix. Call (817) 286-7391 to discuss your situation and see how we can help.
FAQs - Gate Repair Cost
How much does it cost to replace a gate motor in Kennedale?
Replacing a gate motor typically costs between $450 and $1,200, depending on the horsepower required to move your specific gate and the brand of the unit. We work with nine major brands like Viking and DoorKing to ensure we install a motor that is rated correctly for the weight and frequency of use of your gate. Call (817) 286-7391 for an exact quote based on your setup.
Is it cheaper to repair or replace a gate opener?
For most systems, a repair is more cost-effective if the unit is less than 10 years old. If the cost of the repair exceeds 50% of the price of a new unit, or if parts are no longer manufactured for your specific model, we will recommend a replacement. We always provide an upfront, honest assessment of whether a fix is worth the investment.
Do you charge for estimates?
No, we do not charge for estimates. If you are having trouble with your gate, we will come out, diagnose the issue, and provide you with a clear, written price. We stand by our work with our 90-Day Done Right Promise, which guarantees that if the job is not done right, we come back and make it right at no extra cost.
Can you fix my gate today?
We strive to complete most repairs in a single visit because our trucks are stocked with a wide range of parts for common brands like Linear, FAAC, and Mighty Mule. While we cannot guarantee same-day completion for every complex electrical failure, we prioritize emergency situations and will provide a realistic timeline as soon as we assess the gate.
Why is my gate making a grinding noise?
A grinding noise usually indicates worn-out gears within the motor assembly or a lack of proper lubrication on the chain or drive screw. This is a common issue in Kennedale due to the dust and heat, but it should be addressed quickly to prevent the motor from burning out. Call (817) 286-7391 to schedule a technician before the gear fails completely.
When you choose Ironworks Gate Co., you are choosing a company that has been doing this work right for over 42 years. We are not a one-truck operation that disappears when the work gets difficult. We are your neighbors, and we take pride in our welding craft and our automation expertise. Whether you need a simple hinge adjustment or a full motor replacement, we ensure the job is done once, done correctly, and backed by our written guarantee.
If your driveway gate is giving you trouble, do not wait for it to stop working entirely. A stuck gate is more than an inconvenience; it is a security risk for your home. We are ready to help you today. You can rely on our team for honest, professional service that respects your home and your time.
Pricing reflects the Kennedale market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 286-7391. Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.
What Our Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez