Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Arlington
A new driveway gate in Arlington typically runs $2,400-$9,500 installed, depending on material, width, and whether you’re adding automation. Pedestrian gates run $1,200-$3,800, and automatic operators add $1,800-$4,500 to any gate. We’re Ironworks Gate Co., and we’ve been building and hanging gates since 1984. If you’re calling from Arlington, you’ll reach a live person at (817) 286-7391 any hour, any day, and we’ll give you a square, written price before a single bolt is turned.
Why Ironworks Gate Co. Is Arlington’s Preferred Gate Installation Company
Arlington homeowners call us because we know what this soil does to a gate post. Blackland Prairie clay isn’t just a local curiosity. It’s the reason a gate that looked perfect in March is dragging in October. We’ve been out to neighborhoods from Dalworthington Gardens to Viridian, and the failure pattern is the same across the city: footings poured at standard depth heave out of plumb within two or three wet-dry cycles. We plan for that on every install, not just when it’s already gone wrong.
We’ve earned a strong local reputation across Arlington, with consistent praise from homeowners in North Arlington, South Arlington, and the neighborhoods east of Lake Arlington. Our background-checked, uniformed technicians arrive when we say they will, and every job we complete carries a written 90-Day Done Right Promise. That’s not a slogan. It’s the Keystone Standard we’ve applied to every gate job for over four decades.
Victor Salinas leads our crews. He’s spent his career on gate work specifically, and his name goes on every job we send out of our Dallas-Fort Worth office to Arlington. When you call (817) 286-7391, you get a person, not a phone tree, and you get a straight answer about what your gate needs and what it costs.
Our Gate Installation Services in Arlington
Driveway Gate Installation
A driveway gate in Arlington is a working piece of your property, not just an entry point. The wide, flat lots common in neighborhoods like the Lake Arlington area and the older subdivisions off Park Row Drive give you room for a proper swing or slide setup. We handle the whole scope: steel or ornamental iron fabrication, hinge and post setting with footings spec’d for Arlington’s expansive clay, automation, and access control including keypads and vehicle loop detectors. The price is quoted and agreed before any work starts, and we don’t surprise you at the end of the job.
Pedestrian Gate Installation
A well-built pedestrian gate on an Arlington home has to endure the same clay heave as a driveway gate, but people lean on it, slam it, and expect it to latch clean every time. We build ours with through-bolted stainless hinges and frames sized so the gate can’t rack out of square when the post shifts. Whether it’s a simple steel gate off a brick wall in the older neighborhoods north of I-30 or an ornamental aluminum walk gate in the newer communities near Mansfield, we hang it so it opens and closes ten years later the way it did on day one.
Sliding Gate Installation
Sliding gates are common on Arlington lots where a swing gate would cover too much driveway or where the slope makes a swing impractical. A slide gate rides on a steel track and V-wheels, and on Blackland Prairie clay the whole run has to be poured or set with the same care as the posts. We’ve seen slide gates bind within months when the track slab wasn’t built for the soil it sits on. Our approach is to set the track on a reinforced concrete beam with pier anchors to keep the run straight and true through wet and dry seasons alike.
Swing Gate Installation
Swing gates are the classic Arlington driveway gate, and they’re the ones that suffer most visibly when the ground moves. A double swing gate hangs its weight on two hinge posts, and if either post leans, the leaves stop meeting in the middle. We set swing gate posts deeper than code minimum here: a bell-bottom footing or helical pier anchor gets the base of the post below the active clay zone. When we rehanged a double swing gate in Viridian a while back, the hinge posts had tilted three inches in one season. Our crew dug new footings past the clay active zone and switched every hinge and latch to stainless before rehanging the panels. A year later, the plumb line hasn’t moved. That’s the difference between doing the job right and doing it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
If you’re adding automation to a new gate or replacing an old opener, we’re trained and equipped across nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts and control boards stocked for Arlington calls, so the most frequent opener fixes happen in one visit. The right opener for an Arlington gate depends on the gate’s weight, width, and how the soil under the posts behaves, and we match the operator to the job rather than selling you whatever’s on the truck.
Common Gate Installation Problems We See in Arlington Homes
- Leaning hinge posts from clay heave: Arlington’s Blackland Prairie soil swells in wet seasons and shrinks in drought, pushing posts out of plumb within 18 to 36 months when footings aren’t deep enough. That causes the gate leaf to drag on the ground and bind against the latch.
- Rusted-through bottom rails and weld points: The combination of intense summer UV and repeated wet-dry cycles breaks standard painted steel coatings faster here than inland. We see bottom rails rust through from the inside out on gates installed only a few years ago.
- Corroded operator boards and loop detectors: When installers use standard galvanized fittings instead of stainless in Arlington’s soil chemistry, moisture and soil contact corrode connections faster. We spec stainless hardware and properly sealed boards on every automation job.
- Racked frames from undersized or improperly set posts: A gate frame that was square at installation can twist out of shape when its posts move. We weld frames with corner gussets and set posts so the frame itself doesn’t have to fight the ground.
Pricing for Gate Installation in Arlington, TX
A typical driveway gate install in Arlington runs $2,400-$9,500. A single ornamental steel or aluminum swing gate with manual closer usually lands in the $2,400-$5,000 range. Double swing gates run $3,800-$9,500 depending on width, material, and details like spears, rings, or custom scrollwork. A pedestrian gate runs $1,200-$3,800 installed. Adding an automatic operator to any gate runs $1,800-$4,500, including the motor, arm or slide mechanism, and basic controls. Vehicle loop detectors, keypads, or telephone entry systems add $1,200-$2,800, depending on scope. The price is always quoted and agreed before any work starts, and we offer free estimates across Arlington at (817) 286-7391.
We Also Serve Cities Near Arlington
Our crews work throughout the Arlington area, including Mansfield, Kennedale, Grand Prairie, and Burleson. If you’re just outside the city line, you still get the same written 90-Day Done Right Promise and the same upfront pricing. Visit our Arlington page for local details or our Gate Installation page to see the full scope of what we build.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Arlington
Arlington sits on Blackland Prairie expansive clay, which swells and shrinks far more aggressively than the sandy soils in most of Dallas. A standard-depth concrete footing set in this clay gets pushed upward and outward with every wet-dry cycle. The fix is a bell-bottom footing or a helical pier anchor that reaches below the active clay zone. Call (817) 286-7391 and we’ll tell you what your specific gate needs after looking at it.
Yes, we can match an existing powder coat color for Viridian and other HOA-regulated Arlington communities. We’ll take a sample, match the RAL or manufacturer color code, and apply it so the new gate or panel matches the existing finish. Viridian has strict architectural standards for ornamental iron and aluminum gates, and we spec our fabrication and finishing to meet those requirements.
Stainless is the right call here. Arlington’s soil chemistry and frequent wet-dry cycling corrode standard galvanized hinges, bolts, and latch components faster than inland. Galvanized hardware can work for a while, but on a gate that’s going to be here for twenty years, stainless hinges, latches, and fasteners cost modestly more and fail much later.
For an automatic swing gate in Arlington, the operator post and both hinge posts should be set to a depth of 36 to 48 inches, with a bell-bottom footing or helical pier below the active clay zone. Standard 24-inch footings fail here. We set every gate post to spec based on the gate’s size and the soil conditions on your specific lot.
Yes, in most cases you can add a vehicle loop detector and keypad entry to an existing gate system without replacing the operator. We wire the new devices into your existing control board, provided the board has the inputs for them. If the board is too old, we’ll tell you honestly and quote a replacement that fits the existing gate and wiring. Call (817) 286-7391 for a free assessment.
Call Ironworks Gate Co. for Gate Installation in Arlington, TX
If you’re ready for a gate that’s built for Arlington’s soil and climate, call Victor and the team at Ironworks Gate Co. at (817) 286-7391. We’ll schedule a free estimate, measure your opening, and write you a fixed price before any work begins. Every job carries our written 90-Day Done Right Promise, and a live person answers the phone 24 hours a day, 7 days a week. Senior and veteran discounts are always available at 5% off. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington and the surrounding area since 1984.