Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Benbrook
A gate motor and opener in Benbrook typically costs between $675 and $2,400 depending on the gate’s weight, length, and whether we’re replacing an existing operator or installing the first one. Most repairs run $225 to $650, and we complete the large majority of them in a single visit. If your gate is stuck, grinding, or refusing to respond, call (817) 286-7391 and a live person answers, day or night.
We’ve been running service calls through Benbrook long enough to know which streets drain toward the lake, which older ranch homes still carry their original 1980s operators, and which neighborhoods sit on the worst of the black clay. That local knowledge matters when a gate post moves three inches between May and August and the opener suddenly sounds like it’s chewing gravel.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Motor & Opener Company
Our Gate Motor & Opener work in Benbrook centers on ranch-style pipe gates, estate entrances, and older automated swing gates that were hung decades before modern safety sensors became standard. Homeowners around Winscott Road, Timber Creek, and the acreages south of Highway 377 near Benbrook Lake call us because the fix usually isn’t the motor itself. It’s the post. Or the rack. Or a control board that’s been cooking in a metal box since the Reagan administration.
We show up in uniform, background-checked, and we do not leave until the gate cycles correctly under its own weight. Every job in Benbrook carries the same written 90-Day Done Right Promise we’ve applied to every gate for over 42 years. If it isn’t right, we come back. No paperwork, no arguing. Victor Salinas, who leads our crews, has walked more Benbrook driveways than most and he still treats the 400th job with the same care as the first.
Benbrook homeowners remember the last contractor who overpromised. A good many of them are our repeat customers now, because we write the price down before we turn a single bolt and we stand behind the work afterward.
Our Gate Motor & Opener Services in Benbrook
Motor Installation
New gate motor installation in Benbrook starts with measuring the gate leaf, checking the post set, and accounting for the soil you’re built on. A lightweight aluminum residential gate on a quarter-acre lot off Mary’s Creek needs a different operator than a 500-pound pipe-rail double gate on a two-acre horse property near the lake. We quote the job, you approve the number, then we install. Most installs finish in a day.
Motor Repair
This is where most of our Benbrook calls concentrate. On the south and west sides of town especially, the Tarrant County black clay heaves hinge posts several inches in a single wet-dry season. The gate binds, the operator strains, and the motor burns out or throws a limit error. We fix the alignment and the footing first, then address the motor. Repairing the motor without fixing the post is a waste of your money.
Linear Motor
Linear arm operators are common on older Benbrook swing gates, both residential and on the small ranchettes bordering Corps of Engineers land. The arm threads work well until a post moves or a hinge sags, then the arm mechanism takes the stress and strips. We stock replacement arm assemblies and complete Linear motor swaps on-site, usually without a second trip.
Slide Motor
Slide gates are the standard for Benbrook properties with long drives and no room for a swing arc, particularly near the lake and along Lakeside Drive. Slide motor failures in this area tend to follow rack and pinion wear after post movement or debris accumulation in the track. We service and replace slide motors from all major brands and we check the entire run before we call the job done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
Our technicians are factory-trained and field-tested on nine opener brands, and in Benbrook we most frequently service LiftMaster, FAAC, Linear, and Viking units on existing gates. We keep common control boards, remotes, safety eyes, and arm assemblies in our trucks so the repair doesn’t stretch into a parts-order waiting game. If you’re running an older BFT on a ranch gate off Westpark Drive or a Viking slide motor near the lake, we can typically repair it same day. If the board is obsolete, we’ll tell you straight and give you a replacement price before we touch anything.
Common Gate Motor & Opener Problems We See in Benbrook Homes
- Black clay heave binding the gate. Tarrant County’s expansive clay cracks and swells through every wet-dry cycle. Posts that were dead plumb in March can be rocking by July, binding the gate leaf and overloading the operator. This is the single most common cause of repeated motor failures in Benbrook, not the motor itself.
- Stripped rack and pinion on slide gates. Large pipe-rail slide gates near Benbrook Lake carry a lot of mass. When a post shifts even an inch, the rack teeth and pinion gear misalign and grind. Rack replacement usually requires resetting the footing. We do both.
- Legacy control boards without safety sensors. Many 1980s-era estate gates in Benbrook still run on original control boards that predate photocell integration. Power surges and age kill them. In most cases we can retrofit a modern board with safety edges and still use the existing motor housing.
- Ice storm damage to swing operators. Winter ice storms hit the Fort Worth-Benbrook corridor hard. Older swing operators with unsealed post footings or sagging tubular steel gate leaves seize under ice load. If the gate is already heavy and the hinges are worn, the operator bears the full strain and fails.
Pricing for Gate Motor & Opener in Benbrook, TX
Here’s what gate motor and opener work costs in Benbrook as of 2026. A basic residential swing gate opener install on a standard aluminum gate runs $675 to $1,200. Slide gate operators run $1,400 to $2,400 installed, including rack and pinion alignment. Motor repair calls in Benbrook typically bill $225 to $650, with the larger figure reflecting a new control board or arm assembly. Battery backup adds $350 to $700 depending on the system. Heavy pipe-rail ranch gates on lake-area horse properties can push installation higher because of the post work involved, and those quotes include the deep footing correction needed to hold the gate plumb through the next clay cycle. You’ll receive a written price before we start, and the 90-Day Done Right Promise applies to every repair we make. Call (817) 286-7391 for a free estimate.
We Also Serve Cities Near Benbrook
Our Benbrook crews also run regular routes through Gate Motor & Opener in Benbrook and the surrounding communities of Kennedale, Arlington, Everman, and Forest Hill. If you’re in one of those areas with a gate that won’t open or an operator that’s grinding, same phone: (817) 286-7391.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Benbrook
The black clay under Benbrook expands when it absorbs water, and in a wet spring it can lift a gate post several inches in under two weeks. That lifts the gate leaf out of alignment and forces the opener to work against a bind. Fixing it means resetting the post with a deep concrete footing that reaches below the active shrink-swell zone. Once the post is stable, the motor stops fighting the gate. If your gate binds after every rain, call (817) 286-7391 and we’ll check the post depth before recommending any motor work.
In most cases, yes. An older LiftMaster swing operator can be retrofitted with modern safety photocells, edge sensors, and a current control board without replacing the motor housing. UL 325 requires that an automatic gate stop and reverse when it encounters an obstruction, and we bring older Benbrook gates up to that standard regularly. If the arm assembly or gearbox is beyond retrofit, we tell you before quoting the work. Estimates are free at (817) 286-7391.
It’s rack and pinion wear on slide gates, caused by post movement in the lake-area clay. The heavier the gate, the more quickly a misaligned rack strips the pinion gear. We see it repeatedly on horse properties and estate entrances along Lakeside Drive and the roads running south toward the Corps land. The fix is a new deep footing for the gate post, then a fresh rack and pinion aligned to the corrected post. We stock those parts and do this repair in a single visit.
If your gate is your primary entrance and a power outage would trap your vehicles, a battery backup is the insurance worth buying. Benbrook gets its share of spring storm outages and occasional ice-storm blackouts, and a gate that won’t open when the power is out becomes a real problem fast. We install battery backup systems on both swing and slide operators, sized to give you enough cycles to get vehicles in and out during an outage. Ask about adding one when we quote your opener work.
Look at the gap between the gate and the post at the hinge side. If it changes through the year, or if you can see daylight between the post and the footing, that post is moving in the clay. A gate that opens cleanly in winter and grinds in summer is a gate with a moving post. Stop replacing the motor. Call (817) 286-7391 and we’ll check the post before quoting any further repair, because correcting the footing is cheaper than a third motor replacement.
Whether you’re dealing with a stripped slide motor on a lake-area ranch gate, an obsolete control board on a 1980s estate entrance, or a first-time opener installation on a swing gate off Winscott Road, we’ll write you a square price and stand behind the work. Call (817) 286-7391 for a free estimate, and a live person will answer.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook and the DFW area for over 42 years.