Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Crowley
Gate motor and opener repair in Crowley usually runs $180 to $650 depending on whether it’s a capacitor, a control board, or a full motor replacement, and most jobs are done in a single visit. If your gate is grinding, stalling, or refusing to open from the keypad, call us at (817) 286-7391. We work in the Deer Creek, Mayfair, and Bridges at Chisholm Trail subdivisions every week, and we know the soil, the HOA rules, and the failure patterns specific to this part of southern Tarrant County.
Why Ironworks Gate Co. Is Crowley’s Preferred Gate Motor & Opener Company
We’re a Gate Motor & Opener specialist, not a generalist handyman service. Since 1984, Ironworks Gate Co. has focused on one thing: driveway and estate gates, from the hinges and welds to the motors, keypads, and access control. That focus is exactly what homeowners in Crowley tell us they were missing when they call after another company guessed wrong on their first visit.
Crowley’s gate problems are different from what we see in Fort Worth’s older neighborhoods or Arlington’s hills. The Blackland Prairie clay here moves more in a single season than sandier soils move in a decade. A gate tech who doesn’t understand that will keep swapping motors that were never the problem while the real issue, the heaving post, keeps burning through parts and your patience. We’d rather fix the cause once than the symptom every spring.
Every job we complete in Crowley carries the 90-Day Done Right Promise: a written guarantee, no paperwork, no arguing. If something isn’t right, we come back and make it right. And when you call us, a live person answers. Not a voicemail. Not an answering service. Somebody in our Dallas-Fort Worth office picks up, twenty-four hours a day, seven days a week.
Our Gate Motor & Opener Services in Crowley
Motor Installation
A new gate motor in Crowley typically runs $850 to $2,400 installed, depending on the gate’s size, weight, and whether it’s a swing or slide configuration. Before we quote a motor, we look at what’s holding the gate up. In Crowley, that usually means checking whether the hinge posts have been heaved out of plumb by the clay. A new LiftMaster installed on a tilted post will fail early. So we fix the post, then mount the motor. The price is settled before any work starts. No surprises on the bill.
Motor Repair
Most motor repairs in Crowley fall between $180 and $650. That covers common failures like burned capacitors, stripped limit switches, failed control boards, and gearbox damage. The key question we ask on every Crowley service call is whether the operator is failing because of its own age or because the gate it’s pushing has become harder to move. A twenty-year-old subdivision gate that worked fine for fifteen years probably has a post moving, not a motor dying. We check both before we recommend anything.
Linear Motor
Linear arm operators are common on Crowley’s 2000s-era ornamental iron gates, especially in HOA communities like Deer Creek and Mayfair where swing gates dominate. These arms fail most often when snow, ice, or heavy wind loads force the gate beyond its intended travel arc. But in Crowley, the more common failure is quieter: clay movement tilts the post, the arm gets slightly out of alignment, and the whole unit binds. Linear motor repair here starts around $220, with full replacement typically $700 to $1,400.
Slide Motor
Slide motors run gates that travel horizontally along a steel track, and they’re common on wider driveways in Crowley’s newer subdivisions. When a slide gate starts jerking, whining, or tripping its entrapment sensor, the problem is often the track itself: it’s dropped out of level because the concrete or soil beneath it shifted. In Crowley, that’s usually the clay at work again. We re-level the track, check the rack and pinion, and only replace the motor if it’s genuinely worn out. Slide motor replacement runs $700 to $1,800 depending on motor class and gate weight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
We are trained and equipped on nine gate automation brands, and on a typical Crowley week we’re working with LiftMaster, FAAC, and Mighty Mule more than anything else. That matters because a control board from one brand doesn’t swap into another, and guessing with a universal part is how gates end up working for two weeks and dying again. We carry the common parts for these brands on our trucks, which means most repairs in Crowley are completed the same day we arrive.
Common Gate Motor & Opener Problems We See in Crowley Homes
- Hinge posts tipping out of plumb. The Blackland Prairie clay under Crowley expands after spring rain and contracts in August heat, and a post that was perfectly level in October can be off by two inches by summer. The gate begins to drag, the motor labors, and eventually the operator burns out. We fix the post footing, not just the motor.
- Snapped welds on 2000s-era ornamental iron. Crowley’s HOA communities, especially those built during the 2000-2015 wave, used powder-coated iron gates that are now brittle after years of freeze-thaw cycles. Winter ice storms that hit the Fort Worth metro are hard on these gates, and we see snapped hinge welds and cracked scrollwork that jam slide and swing openers.
- Failed loop detectors at subdivision entries. After fifteen-plus years, the loop detectors buried in the asphalt at many Crowley community entries corrode and stop sensing vehicles. Residents then have to key in manually or call the management company. We can replace the loop, or in many cases, upgrade the entry to a keypad or telephone entry system that doesn’t rely on the loop at all.
- Entrapment sensor faults. Modern gate openers in Crowley are required to stop and reverse if they hit an obstruction. When a sensor starts tripping at random, the cause is often a misaligned gate that swings too far, or a photo eye that’s no longer level because its post shifted. We re-align the gate and the sensors as a set.
Pricing for Gate Motor & Opener in Crowley, TX
| Service | Typical Crowley Price Range |
|---|---|
| Motor repair (capacitor, limit switch, control board) | $180-$650 |
| Linear arm replacement | $700-$1,400 |
| Slide motor replacement | $700-$1,800 |
| Full swing gate motor installation | $850-$2,400 |
| Battery backup installation | $300-$700 |
| Intercom integration | $400-$1,200 |
| Seasonal tune-up | $89 |
These are honest ranges for Crowley’s market, not a bait price you’ll never see. The two biggest factors in your final quote are gate weight and post condition. A heavy ornamental iron gate on a tilted post costs more to automate correctly than a lightweight aluminum gate on solid footings. Every quote is settled in writing before any work begins. We also offer a free second opinion on any written estimate you’ve received from another company, and a $50 discount on any repair over $250. Senior and veteran customers always get an additional 5% off.
We Also Serve Cities Near Crowley
While this page is written for Crowley’s HOA communities and established neighborhoods, our crews also work regularly in Burleson, Kennedale, Fort Worth, and Arlington. If your property sits just outside the 76036 ZIP code, give us a call. We’ll know exactly which part of town you’re in and when we can have a technician there.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Crowley
Yes, in nearly every Crowley HOA community, the architectural committee must sign off on any visible change to your gate operator, including the style of the arm, the color of the housing, and sometimes even the brand. We’ve worked with management companies across Deer Creek, Mayfair, and other Crowley subdivisions long enough to know which committees want a full submittal packet and which just need a one-line description and a photo. We’ll prepare the paperwork you need and coordinate with the management company so the installation doesn’t stall in committee review. Call (817) 286-7391 if you need a hand with the approval process; it’s part of the job, not an add-on fee.
In Crowley, it’s usually the soil. The Blackland Prairie clay shrinks sharply during summer drought, and that contraction lets gate posts settle and tilt. A tilted post changes the gate’s travel geometry by enough to trip the safety sensors, and the operator faults out as a result. Heat can also degrade old capacitors on the control board, but if your gate fails every summer and works fine by November, suspect the clay first. We’ll diagnose it properly; we don’t guess. Call (817) 286-7391 for an inspection, and estimates are free.
Yes, battery backup for a gate opener in Crowley typically runs $300 to $700 installed, and it’s a smart addition when winter storms knock out power for a day or more. The backup system keeps the gate operational for a set number of open-close cycles so residents can get in and out when the power’s down. We stock compatible battery backup units for LiftMaster, FAAC, and Mighty Mule systems, and we can wire it in during a single visit. Call (817) 286-7391 to schedule the work and get a firm written price.
The real fix is almost always the post, not the gate panel and not the motor. We recently reset a swing gate’s hinge post in the Deer Creek subdivision after the clay heaved it two inches out of plumb, throwing off the LiftMaster operator’s arm geometry and tripping the entrapment sensor. We excavated an oversized concrete bell footing below the shrink-swell zone, added gravel drainage, and re-aligned the rack so the motor no longer labors on every cycle. If your gate sags, dragging the operator along with it, the fix that lasts is a properly set post. Short-term fixes like shimming the hinges will fail again. Call (817) 286-7391 for an honest assessment, and we’ll tell you if you need a post reset or something simpler.
We handle that coordination regularly for Crowley HOA communities, and the process is straightforward: we meet the management company representative on site, confirm the outage window, stage all parts before we begin, and plan the replacement so the gate is never left unsecured or stuck open overnight. For larger subdivisions, we can schedule the work during off-peak hours and provide temporary manual operation if needed. We’re insured and bonded, our technicians are background-checked and uniformed, and the management company will have one point of contact throughout the job. Call (817) 286-7391 to start the conversation; we’ll bring a written plan and a firm price, and your residents will have their gate back the same day.
If you’re tired of gate companies that don’t understand why a motor in Crowley fails differently than one in Arlington, call us. We answer the phone, we know the soil, we know the HOAs, and we stand behind every job with a written 90-Day Done Right Promise. Reach us at (817) 286-7391 for a free estimate, a second opinion, or just a straight answer about what’s wrong with your gate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crowley since 1984.