Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Crowley
Gate repair in Crowley, TX usually means one of three things: a post that’s tilted out of plumb, an opener that’s stopped responding, or hinges that have sagged under years of heat and clay-soil movement. A typical repair visit runs $180 to $450 depending on the failure, and most jobs are finished the same day we arrive. We know Crowley’s soil, its HOA communities, and the particular way gates fail here. Call us at (817) 286-7391 and a live person will answer, day or night.
Why Ironworks Gate Co. Is Crowley’s Preferred Gate Repair Company
We’ve worked on enough gates in Crowley’s Deer Creek, Silver Leaf, and Hunters Meadow neighborhoods to know exactly what the Blackland Prairie clay does to a steel post over one Texas year. Homeowners here don’t call us because they want a new gate. They call because their gate stopped closing, or it drags against the ground, or the opener grinds and trips. They want it fixed once, correctly, and they want a company that will still be answering the phone if something isn’t right two months later.
Victor Salinas runs Ironworks Gate Co. with a simple rule: the 400th job gets the same care as the first. Every technician who rolls up to a Crowley driveway is background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. We don’t use subcontractors. The person you shake hands with is the person who does the work.
We answer the phone 24 hours a day, 7 days a week. Not a voicemail, not a callback queue. A live person. That matters when a 300-pound gate is stuck open at 9:30 on a Sunday night and your driveway leads straight to your backyard and your dogs.
Our Gate Repair Services in Crowley
Electric Gate Repair
Electric gates in Crowley do a lot of work. They cycle hundreds of times a month in 100-degree heat, freeze cycles in winter, and run on control boards that sit inside steel boxes baking in the south sun. When an electric gate stops responding to the remote, the keypad, or the intercom, we trace the problem to its source: a failed capacitor, a corroded limit switch, a fried control board, or a receiver that’s lost its programming. We service nine automation brands, so the fix is usually one visit.
Automatic Gate Repair
Automatic gate repair in Crowley often comes down to alignment. When the Blackland clay under your gate shifts, the opener’s travel path changes. The motor strains. Photocells misalign. The gate reverses when it shouldn’t, or won’t reverse when it should. We re-set travel limits, re-align safety sensors, and make sure the gate closes like it did the day it was hung. Most automatic opener repairs are done same-visit.
Hinge & Post Repair
Here’s what we tell Crowley homeowners: your gate post is not a one-time fix. In the 76036 ZIP, shrink-swell clay moves enough seasonally that a post re-plumbed in October can be visibly tilted again by August. We set posts the way this soil demands: oversized concrete bells, gravel drainage at the base, and deeper footings than what original builders poured. Hinges get greased, shimmed, or replaced with heavier-gauge steel where the gate’s weight demands it.
Gate Realignment
A sagging gate in Crowley is almost never just a hinge problem. The post has moved. The panel has dropped. The pickets are pulling at the rails. We bring the gate back to level and square, re-weld or re-bolt what’s loose, and set the operator travel path to match the corrected geometry. If the gate was dragging a crescent into your driveway, realignment stops the wear before the panel needs replacing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
We’re certified on nine gate-automation brands, so whatever is mounted next to your driveway, we’ve seen it before. Around Crowley we service a lot of FAAC and BFT hydraulic and electromechanical operators on HOA estate gates, plus Linear and LiftMaster residential swing and slide units. We keep common parts stocked across our DFW service vehicles, which means a Crowley repair doesn’t stall out waiting on a part ordered from California. If it’s a board, an arm, a capacitor, or a set of photocells, there’s a good chance it’s on the truck when we pull up.
Common Gate Repair Problems We See in Crowley Homes
These are the failures we see week after week in Crowley, and they’re tied directly to this area’s soil, weather, and housing stock:
- Posts heaving out of plumb after spring rain. The clay saturates, swells, and pushes the footing up unevenly. The gate drags, the latch won’t line up, and the opener trips its entrapment sensor. We re-plumb the post and set it with drainage so the next rain cycle doesn’t do the same thing.
- Slide gates jumping their track when ground shifts. Saturated ground under the track slab heaves just enough to bend the rack or twist the track rail. The gate stutters, binds, or refuses to move. We re-level the track, straighten or replace the rack, and reset the opener limits.
- Winter ice seizing operators and snapping hinges. Crowley gets the same ice storms as Fort Worth, and powder-coated ornamental iron gets brittle in a hard freeze. A seized operator arm or a snapped hinge leaf is a common late-winter call. We replace the broken hardware and inspect the rest before the next freeze.
- 15-to-20-year-old HOA gate hardware reaching end of life. The master-planned subdivisions built across Crowley in the 2000s and early 2010s are now hitting the age where original opener motors, control boards, and hinges fail in clusters. We handle a lot of this work and always quote the repair versus replacement cost honestly.
Pricing for Gate Repair in Crowley, TX
Here are honest ranges for Crowley’s market. A hinge service and gate realignment typically runs $180 to $320. A post re-set with an oversized concrete bell and drainage runs $350 to $650 depending on depth and access. Electric gate repairs (boards, receivers, limit switches, capacitors) run $220 to $480. Full automatic opener replacement, when repair isn’t the right call, starts around $900 installed. Every job gets a written price agreed before we touch a bolt, so the number we quote is the number you pay. We also offer a $50 discount on any repair over $250 and a 5% senior and veteran discount on every job. Call (817) 286-7391 for a free estimate.
We Also Serve Cities Near Crowley
Our Gate Repair team covers Crowley and the surrounding southern Tarrant County communities: Gate Repair in Crowley, plus Burleson, Kennedale, Fort Worth, and Arlington. If you’re just outside the city line, call us. Chances are we already have a truck nearby.
Weather, Wind, and Your Crowley Gate
Wind is a bigger factor here than most homeowners realize. North Texas storms, especially the spring fronts that roll down from Tarrant County, put real lateral load on solid infill gates. A flat ornamental-iron panel catches wind like a sail, and the force transfers straight to the hinges, the post, and the operator. When the post footing is already weak from clay movement, one strong front is enough to finish the job. That’s why we check post plumb and hinge tightness on every repair call, not just when the gate is obviously sagging.
What to Do When the Power Is Out
Every automatic gate has a manual release. It’s usually a lever or a keyed mechanism on the operator arm or motor housing. Engaging it disconnects the drivetrain so you can push or pull the gate by hand. This is safe to do: the gate weighs the same as it always does, but it will not move on its own once released. If you can’t find the release, or the gate won’t move with the release pulled, do not force it. A stuck gate after a storm usually means the post has shifted or the rack is jammed, and forcing it can snap the operator arm or damage the gearbox. Call us. We’ll walk you through it or send a truck.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Crowley
Because the soil under it is expanding and contracting. Crowley sits on shrink-swell Blackland Prairie clay, and in the 76036 ZIP the seasonal movement is dramatic enough that a post set plumb in October can lean again by August. The fix that lasts is not just re-plumbing the post; it’s excavating a wider hole, pouring an oversized concrete bell below the frost line, and adding gravel drainage at the base so water doesn’t pool and swell the clay around the footing. That’s the method we use on every post re-set in Crowley. Call (817) 286-7391 and we’ll take a look at your footing.
First, open the manual release on the gate operator. This disconnects the motor from the drivetrain so the gate can be pushed by hand. Most residential openers have a release lever or key on the operator housing. If you can’t locate it, or the gate won’t budge even with the release pulled, the problem is usually mechanical, not electrical: a shifted post, a bent rack, or a jammed roller. Don’t force it. A trained technician can diagnose and repair it safely. Call us anytime at (817) 286-7391 and we’ll talk you through it.
Stand clear of the gate’s path and start the closing cycle. While the gate is moving toward closed, block the photo-eye beam with your hand about ankle height. The gate should stop and reverse within a second. If it doesn’t, the photocells are misaligned, dirty, or failed. This is a safety device required by law on automated gates, and it’s the first thing we check on any automatic gate repair call in Crowley. If your gate reversed for no visible reason recently, that’s usually the clay shifting the post enough to break the beam alignment. The fix is often quick; the consequences of ignoring it are not.
Yes. Those subdivisions, built during Crowley’s 2000s growth wave, are exactly where we do most of our work. The ornamental iron entry gates and automated openers installed new in that era are now 15 to 20 years old, and many of them are due for hinge replacement, post re-setting, opener board replacement, or rust repair at the welds. We weld, we replace, we re-plumb, and we don’t push replacement when the existing gate has another 15 years in it. If you’re in Deer Creek, Silver Leaf, or any HOA community around Crowley, call us for an honest assessment.
Usually both, and usually neither is the root cause. A gate that sags at the latch side puts stress on the hinges, and over time the hinge leafs bend or the welds crack. But the reason the gate started sagging is almost always that the hinge post has moved out of plumb. In Crowley’s clay soil, post movement is the default, not the exception. We fix the post first, then assess the hinges and the panel frame. If the panel is structurally intact, new or repaired hinges get you square. If the panel has racked, we weld it back to square before re-hanging. That’s the order that makes the repair last.
Call Ironworks Gate Co. for Gate Repair in Crowley
If your gate is sagging, jammed, or won’t open, call (817) 286-7391. You’ll speak with a live person, not an answering service. We’ll ask what the gate is doing, give you an honest range over the phone when we can, and schedule a visit. Every repair is quoted in writing before work starts. Every job is backed by our 90-Day Done Right Promise. We’ve been standing behind our work for over 42 years, and we don’t plan to stop. That’s the whole point.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crowley and the DFW metro.