Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Everman
Gate repair in Everman usually costs $140 to $420 depending on whether the post needs re-setting or just a hinge adjustment, and most jobs are completed the same day we arrive. That’s the honest range for this part of southern Tarrant County, where Blackland Prairie clay works against gate posts year after year. Our crews have been pulling canted chain-link posts and straightening sagging swing gates in Everman for decades. Call (817) 286-7391 and a live person answers, day or night.
Everman’s soil is the quiet culprit behind most gate failures here. The clay expands after winter rains, then contracts hard during July and August, and that cycle rotates under-footed posts out of plumb season after season. We know exactly what that looks like on the ground, because we’ve fixed it hundreds of times. We’ll be there when we say.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Repair Company
Ironworks Gate Co. has been in the gate trade for over 42 years, and the neighborhoods of Everman are familiar ground. Homeowners here tend to stay put, and they remember the contractor who charged them twice for the same repair. That’s why our work comes with the 90-Day Done Right Promise, written on every job. If it’s not right, we come back and make it right. No arguing, no paperwork, no exceptions.
Our owner, Victor Salinas, built the company on a blacksmith’s respect for the metal and an electrician’s respect for the motor. The technicians we send to Everman are background-checked and uniformed, and they treat your gate and your yard the way they’d treat their own mother’s. When a repair is finished, the price you were quoted before the first bolt turned is the price on the invoice. That’s a square deal, and we stand behind it.
Our Gate Repair Services in Everman
Post Re-setting & Footing
On Everman’s older residential streets, most gate posts were set with little or no concrete back in the 1960s and 70s. Decades of clay movement have left them visibly canted, which throws off the entire gate. We pull the post, bore a proper footing below the active clay zone, and set it with a concrete collar sized for Texas soil. The gate hangs straight, the latch lines up, and the post stays put.
Hinge & Post Repair
Aging galvanized hinges on original tract-home fences seize from rust and lack of lubrication. Homeowners end up lifting the gate by the top rail just to get it to close. We replace worn hinge brackets, weld cracked mounts, and lubricate or rebuild seized pivot points. When you look at the gate after we leave, it should close with one hand, not a shoulder shove.
Gate Realignment
A gate that drags across the ground on the latch side has almost always lost its post alignment. In Everman, where clay movement is constant, realignment is rarely a permanent fix by itself. We assess whether the post is simply off-plumb or actively moving with the soil. If it’s the latter, a re-set is the only repair that will last. We’ll tell you straight which one you need.
Lock Repair
North Texas ice storms freeze gate latches and padlocks solid, and the cycle of freeze and thaw wrecks internal lock mechanisms over time. We repair and replace latch assemblies, re-key locks where possible, and adjust striker plates so the gate latches cleanly even after the frost heave has shifted things a fraction. In Everman, a reliable latch is a security matter, not a convenience.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
Most Gate Repair work in Everman focuses on manual chain-link and wood swing gates, but plenty of homes have added automation over the years. Our techs are trained and equipped on nine opener brands, including LiftMaster, FAAC, BFT, and Linear. Whatever is mounted on the post or buried in the ground, we’re familiar with it. And because we carry common parts on the truck, most Everman jobs are finished in a single visit.
Common Gate Repair Problems We See in Everman Homes
- Posts heaving out of plumb. The Blackland Prairie clay expands in winter and spring, shrinks in summer, and rotates under-footed posts several inches a season. The gate drags, the latch misses, and realignment alone won’t hold.
- Seized hinges on original galvanized chain-link. These 50-year-old hinges rust, bind, and eventually snap if ignored. Homeowners compensate by lifting the gate, which accelerates the wear.
- Frozen latches after winter ice storms. Moisture gets into the mechanism, freezes, and jams the latch closed. The freeze-thaw cycle then corrodes internal springs and catches, leading to lock failure even in mild weather.
- Dry-weather gate fatigue near open lots. Everman’s mix of residential blocks and open fields means wind-loaded gates on exposed corners take repeated lateral stress during spring storm season, loosening hinge hardware and post anchors.
Pricing for Gate Repair in Everman, TX
A straightforward hinge replacement on a chain-link gate in Everman typically runs $120 to $220 including parts and labor. Gate realignment, where the post is still sound but needs shifting and shimming, runs $150 to $260. A full post re-set with new concrete footing is the heavy job, usually $280 to $450 depending on post size and how deep we have to bore below the clay line. Lock repair and latch replacement run $90 to $180. Every price is quoted and agreed before work starts, and we honor the quote. Call (817) 286-7391 for a free estimate. Active offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Everman
Ironworks Gate Co. is proud to serve Gate Repair in Everman and the surrounding southern Tarrant County communities. Homeowners in Kennedale, Arlington, Forest Hill, and Mansfield call us for the same reason Everman does: a gate that closes right and stays right, backed in writing. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Everman locally with no mileage surprises.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Everman
Because the clay under the post is still moving. Straightening the post above ground does nothing to stop the shrink-swell cycle below it. Until the post is pulled and re-set in a proper footing below the active clay zone, it will lean again after the next dry spell. Call (817) 286-7391 for an exact assessment, free of charge.
Look at where the post meets the ground. If there’s a visible gap between the concrete collar and the post, or if the post itself is canted while the panel is straight, the post is moving. A hinge adjustment will hide the symptom for a few months, but the post will keep rotating. We’ll tell you which repair is right, and quote it before any work begins.
Yes. We regularly install and service automation on chain-link swing gates, matching the operator to the gate’s weight, width, and wind exposure. LiftMaster, FAAC, BFT, and Linear all make linear arm and ram operators suited to utilitarian gates. Call (817) 286-7391 and we’ll walk you through the options and give you a written price.
Moisture inside the latch housing freezes, which either jams the mechanism closed or prevents the striker from engaging. Homeowners who force it often break the internal spring or catch. We repair or replace frozen latch assemblies every winter in Everman, and we recommend a weather-resistant lubricant application before the first freeze. If yours is already stuck, call us at (817) 286-7391.
Original galvanized hinges from the tract-home era were never designed for 50 years of Texas rain, humidity, and dust. The zinc coating wears through, rust sets in, and the pivot grinds itself stiff. Lubrication buys time, but replacement with commercial-grade hinges is the real fix. Most hinge replacements in Everman run $120 to $220, quoted upfront.
Call Ironworks Gate Co. for Gate Repair in Everman
If your gate drags, leans, sticks, or won’t latch, call (817) 286-7391. A live person answers 24 hours a day, seven days a week. We’ll give you a straight answer, an honest price, and a repair that holds up to Everman’s clay. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman and the surrounding Tarrant County communities.