Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Everman
Gate access control in Everman typically costs $350 to $1,200 for a keypad, card reader, or phone entry retrofit on an existing gate, and $1,800 to $4,500 when a full operator and access system install is required. Most Everman jobs are completed in a single visit, though the older chain-link gates common in this part of southern Tarrant County often need post realignment first. If your gate has not latched right in years or the keypad stopped working after the last hard rain, call us at (817) 286-7391. We will tell you straight what it needs and what it costs before any work begins.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Access Control Company
We have spent over 42 years working on gates just like the ones that line Everman’s residential blocks. Your neighborhood was built in a particular era, and the gates that survive from that era have particular problems. We know where those problems come from before we even pull up to the driveway. Most of the calls we run in Everman come from homeowners who have lived in the same house for twenty or thirty years, who watched the gate work fine for the first decade and then slowly start to bind, sag, or refuse to open on the first try.
The difference with Ironworks is that we do not patch and run. When we retrofit a keypad entry onto an old swing gate that has been out of plumb since the last drought, we address the post before we mount the keypad. That is why Everman homeowners call us back, and why they recommend us to their neighbors along W. Enon Avenue and down toward the park. Our technicians are background-checked, uniformed, and they work in your yard the way they would work in their own mother’s yard. Victor Salinas set that standard, and it has not moved in over four decades.
We service all of Everman, from the older streets east of Business 287 to the newer-construction pockets off Everman Parkway near the high school. A live person answers our phone 24 hours a day, 7 days a week. No voicemail tree, no answering service. You call, a person picks up, and we schedule the truck. That matters when a gate is stuck open at night.
Our Gate Access Control Services in Everman
Keypad Entry
A keypad entry system on an Everman gate usually runs $350 to $700 installed when the gate post is sound. The trade-specific detail here is that many of Everman’s 1970s tract-built chain-link posts were set with no concrete at all, so a keypad retrofit often requires the post to be re-set first. We will tell you if yours needs it and build that into the quoted price before we start. The keypad itself is the cheap part. The post underneath it is what makes or breaks the job.
Remote Control
Most Everman homes with a gate operator use simple remote transmitters, and those fail in predictable ways: dead batteries, worn buttons, or a receiver that has drifted out of range. Remote replacement or receiver repair runs $95 to $300 depending on the age of the operator. If you are still holding a remote from a system installed in the 1990s, we can match a compatible transmitter or recommend a full receiver upgrade when matching parts are no longer made.
Phone Entry
Phone entry systems let you buzz in a visitor from inside the house without walking to the gate. On Everman ranch homes with the original chain-link perimeter, adding a phone entry system almost always involves running low-voltage wire across a yard that has settled over decades. The cost typically lands between $800 and $1,500, depending on the distance from the house to the gate and whether a call box can be mounted on the existing post or needs a new one. We handle the wiring, the mounting, and the programming on the same visit in most cases.
Card Reader
Card reader access control in Everman runs $400 to $900 for a standard proximity card system on a pedestrian gate, and more when tied into an automatic vehicle gate operator. These systems are common on rental properties and multi-generational lots in Everman, where a family might need a few different cards for the grandparents, the adult children, and a home health aide. We can program new credentials, deactivate lost ones, and tie the reader into an existing opener from LiftMaster, FAAC, or Linear.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
Our team is trained and equipped on nine gate-automation brands, but the three we see most often on Everman properties are LiftMaster, FAAC, and Linear. Older Linear operators are especially common on south Fort Worth suburban homes from the 1980s and 1990s, and many are still running with original control boards that have no surge protection. We carry parts for these systems on the truck when we head into Everman, so a single visit usually gets the job done. If you have a brand we did not name here, call anyway at (817) 286-7391. We work on all nine major opener brands and we will tell you honestly whether yours is worth repairing.
Common Gate Access Control Problems We See in Everman Homes
- Canted posts from Blackland Prairie clay movement. Everman sits squarely on expansive clay soils in southern Tarrant County. Every winter the ground swells with rain, and every July it shrinks hard in the drought. Posts that were set shallow or with no concrete rotate out of plumb, the gate binds, and the operator stalls or strips its gears within a season.
- False obstruction faults from uncalibrated photocells and loop detectors. When the gate frame moves with shifting soil, the photo eyes and loop detectors that were never properly calibrated on legacy Everman gates start throwing ghost faults. The gate refuses to close, or reverses for no reason. The fix is calibration or sensor replacement, not a new operator.
- Fried keypad and card reader inputs after DFW ice storms and summer brownouts. Most older access control boards in Everman retrofits have no surge protection. When a winter ice storm knocks power lines or a July brownout hits, the low-voltage inputs on the board take the hit. We add surge protection on every access control job now.
- Dead gearboxes from years of forcing a sagging gate. If the hinge post leans even two inches, the gate’s own weight fights the operator on every cycle. The motor works harder, the gears wear faster, and the operator dies early. Re-setting the post before replacing the operator is the difference between a repair that lasts and one that fails again next year.
Pricing for Gate Access Control in Everman, TX
Here is the honest math for this market. Keypad entry retrofit on a stable post: $350 to $700. Card reader on a pedestrian gate: $400 to $900. Phone entry system wired from house to gate: $800 to $1,500. Full operator replacement with new access control: $1,800 to $4,500. If your post is leaning, add $300 to $600 for a concrete post re-set, which on an Everman chain-link gate from the 1970s is required more often than not.
The price we quote is the price you pay. We do not open up a gate and then pad the bill. Before any bolt is turned, you will have a written number. And if it turns out a $200 hinge realignment solves the problem instead of a $700 keypad replacement, we will tell you that too. That is how Victor Salinas has run this company for 42 years, and it works. Call (817) 286-7391 for a free estimate.
We Also Serve Cities Near Everman
We run trucks into Everman from our Dallas-Fort Worth dispatch office, and the same crew covers the surrounding area. If you have family or property in Everman plus nearby Kennedale, Arlington, Forest Hill, or Mansfield, one call covers it all. Our Gate Access Control team schedules across the whole southern Tarrant County corridor, so we can make one visit count for two addresses.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Everman
Yes, and in most of Everman the post is leaning. Our standard retrofits on 1970s chain-link gates almost always include a post re-set before the keypad goes on. We cut the old post out, dig a proper footing, set the post in concrete, and only then mount the keypad and operator. If the post stays crooked, the keypad will work but the gate will not, so we fix the post first. Call (817) 286-7391 and we will come look at it for free.
It is usually not the heat itself, but what the heat does to Everman’s clay soil. As the Blackland Prairie clay dries and contracts during July and August, the gate post shifts just enough to make the gate bind. The operator then draws more current, overheats, and trips its thermal protection. A technician who only checks the motor will miss it. We check the post, the hinges, and the operator together. Estimates are free at (817) 286-7391.
Any automatic gate operator installed before 2016 likely does not meet current UL 325 safety standards unless it has been retrofitted with monitored entrapment protection. That means photo eyes, contact edges, or both, tied directly into the control board’s monitored inputs. We check this on every access control call in Everman, because the safety standard is not optional. If your gate does not reverse when it should, shut off the power to the operator and call us at (817) 286-7391.
Yes, and it is a common upgrade on the older ranch homes here. The work involves mounting a call box at the gate, running low-voltage wire from the house, and installing a phone entry controller that rings your existing landline or cell phone. Expect $1,200 to $1,800 for the full job when a gate operator is also being added, and $800 to $1,500 if you only need the entry system on a manual gate or pedestrian opening. We quote it before we start, and we handle the trenching and wiring ourselves.
Everman sees reliable ice storms every few winters, and they hit gate hardware in specific ways. Freezing rain coats the latch mechanism and the keypad face, and when the thaw comes, the water that got inside the control board shorts it out. Post-mounted keypads and card readers without surge protection are especially vulnerable. After an ice event, we run more calls for dead keypads and stuck latches than any other time of year. Call (817) 286-7391 after a storm and we will get you back on a schedule fast.
Why Local Knowledge Changes the Quote
Here is the part that only applies to Everman. In newer Tarrant County suburbs, gate posts are set in concrete footings, the soil might shift half an inch over a decade, and a keypad retrofit is a straightforward mount-and-wire job. In Everman it is different. The 1970s tract builders on the Blackland Prairie often set chain-link posts with no concrete at all, just earth tamped around the post. Forty years of seasonal clay expansion and contraction has left those posts visibly canted, and any access control retrofit that does not address the post is a waste of money.
We learned this the hard way on a residential street off Enon Avenue. The call was for a keypad entry retrofit on a decades-old chain-link swing gate. The operator’s mounting plate was still solid, but the hinge post had rotated nearly two inches out of plumb from clay movement. We cut and re-set the post with a proper concrete footing, remounted the gate operator, and installed a LiftMaster keypad entry. The sag correction fixed the binding that had burned out the previous operator’s motor. The keypad worked, but the post re-set is what made the job last.
This is why an Everman quote sometimes includes a line item that a quote in Arlington or Mansfield would not. It is not padding. It is the difference between a gate that works for five years and a gate that strips another gearbox by next spring. We would rather quote it honestly the first time than come back and charge you again later.
Call Ironworks Gate Co. for Gate Access Control in Everman
If your gate is sagging, your keypad is dead, or you want to add access control to a gate that has never had it, call us at (817) 286-7391. A live person answers, 24 hours a day, 7 days a week. We will ask a few questions, tell you what we think over the phone, and set a time to come look at it in Everman. The estimate is free, the price is set before we start, and every job is backed by our written 90-Day Done Right Promise. Done right, backed in writing, and we will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving the Dallas-Fort Worth area since 1984.