Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for Kennedale Homeowners
Gate Access Control in Kennedale gives you command of who enters your property, without ever leaving the house. A keypad, phone entry system, or video intercom replaces the old routine of rolling down the driveway to let someone in. Ironworks Gate Co. has installed and serviced these systems across Tarrant County for over 42 years, and we answer the phone live at (817) 286-7391 when yours stops working. Most access control repairs in Kennedale are completed the same day we arrive.
We know how the Best Gate Access Control in Kennedale, TX can suddenly leave you stuck with a keypad that blinks but won’t open, or a remote that only works when you’re ten feet away. That’s the moment homeowners in Kennedale call us. We show up in a marked truck, diagnose the problem on-site, and quote the price before any work begins. No surprises.
What Our Gate Access Control Service Includes
Gate access control covers every way a gate gets opened from outside the property, and every way you keep it closed to people who should not get in. Below is what we handle, day in and day out, on driveways across Kennedale.
Keypad Entry
A keypad entry system lets you set one or more access codes so family members, delivery drivers, and trusted workers can open the gate without a remote. It is the most common first upgrade we install on older swing gates in Kennedale, and it’s one of the most cost-effective ways to stop handing out garage door openers. We install weather-sealed keypads rated for the North Texas sun and heat, wire them to the opener, and program codes on the spot. When a keypad gets flaky after a hard rain or a lightning strike, we can usually replace the board or the whole unit in under an hour.
Remote Control
Remote controls are the handheld transmitters that open your gate from the car, and they fail more often than just about any other component. We stock replacement remotes and receiver boards for Mighty Mule, LiftMaster, FAAC, and BFT systems, so you are not waiting a week for a part to ship. If your remote range has shrunk to ten feet, the problem is often the receiver antenna or interference from nearby power lines along Kennedale-New Hope Road. We test the whole path, not just hand you a new remote and hope it fixes the problem.
Phone Entry
A phone entry system lets a visitor press a button at the gate, which dials your home phone or cell phone, and you press a key to open the gate from anywhere. It is a good fit for Kennedale homeowners who get regular deliveries, or who want to let a landscaper in without giving out a code that never changes. We install cellular-based phone entry units, which work even when the home internet is down, and we program them with your numbers before we leave. If your system says “line busy” or won’t dial out, the fault is usually in the phone module or antenna, and we can correct it on the first visit.
Card Reader
Card readers are proximity-based, meaning a small fob or card waved near the reader opens the gate without a code or a remote. They suit homes with a lot of repeat visitors, like a property with a detached workshop or a shared driveway. Ironworks Gate Co. installs and programs card readers that integrate with the nine opener brands we service, and we can add or delete cards as your needs change. We have replaced plenty of readers on Kennedale properties where the original unit was never properly sealed against moisture, and we take the extra ten minutes to mount and seal it correctly.
Video Intercom
A video intercom adds a camera and two-way audio at the gate, so you can see and speak with whoever is outside before you open up. It is the best answer when you want to know who is at the gate at 9:00 p.m., not just that someone pressed a button. We install video intercom systems with night vision and mobile app access, sized for the long driveways you find on the east side of Kennedale. If the picture is cloudy or the audio has gone dead, we trace the issue from the camera through the wiring to the monitor, and repair or replace just what is needed.
Smart Access
Smart access ties your gate into your phone, so you can open it from an app, check whether it is closed, and grant temporary access to a visitor from anywhere. It is the upgrade we recommend for Kennedale homeowners who travel and want to know the gate is shut and locked at 2:00 a.m. We install smart controllers that work with LiftMaster and Mighty Mule openers, and we set up the app on your phone before we leave the driveway. If the app stops connecting, it is usually a Wi-Fi signal issue at the gate, and we know how to fix the range problem without running new wire through your yard.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
We carry parts and know the wiring on LiftMaster access control systems from the oldest keypad models to the newest app-based controllers. The LiftMaster boards and receivers on most Kennedale gates have predictable failure points, and we keep the common replacement parts on the truck. That saves you a second trip and a second week of a gate that will not open from the driveway.
Mighty Mule systems are common on the single-swing and dual-swing gates all over Tarrant County, and we have replaced and reprogrammed enough of their control boards to know the early warning signs. We also handle Arlington Gate Access Control with the same expertise. FAAC and BFT are the brands you see on heavier estate gates, and Victor Salinas has worked on both since their early hydraulic and electromechanical models. Whether your access control gear is one of these four or any other make on the property, we will get it talking to the opener again.
Signs You Need Gate Access Control Right Now
- The keypad lights up but the gate does not move. This usually points to a bad relay on the control board or a failed connection between the keypad and the opener. You can waste a weekend swapping batteries, but a dead relay will not come back on its own, and the longer it sits, the more likely you are to get locked out entirely.
- The remote only works from a few feet away. A remote that used to open the gate from the corner of Kennedale-New Hope Road and now only works at the gate itself means the receiver or antenna is failing. The fix is usually inexpensive when caught early, before the receiver dies completely and strands you outside.
- The phone entry system will not dial out, or rings forever. Phone entry depends on a cellular or landline connection that degrades over time in the summer heat. If callers get a busy signal, the gate is already a security gap, because there is no way for a delivery driver or a family member to reach you.
- You are handing out more remotes and codes than you can track. When you have given out six remotes, three garage openers, and an old code to a lawn crew from three years ago, you no longer know who can open your gate. A keypad or card reader with assignable codes puts you back in charge.
- The gate opens on its own, or closes at odd times. Random open-and-close cycles point to a shorted wire, a failing sensor, or interference on the control frequency. Beyond the nuisance, a gate that opens itself is a gate that is not doing its job, and it should be looked at before a bad board takes the opener down with it.
Our Gate Access Control Process - Step by Step
- 1
Call and speak to a person. When you call Ironworks Gate Co. at (817) 286-7391, a live person answers, day or night. You describe what is happening, and we schedule a visit at a time that works for you. If it is an emergency, we work you in the same day.
- 2
We inspect the entire access path. Our technician tests the keypad, receiver, wiring, antenna, transformer, and the opener’s control inputs. Many companies replace the keypad and call it fixed, only to leave the real fault in the underground wire. We use a multimeter and signal tracer to find the actual break, not the symptom.
- 3
You get an upfront price in writing. Before we turn a single screw, you will know exactly what the repair or replacement costs. If the access control unit is beyond repair, we give you options for new equipment with a clear, itemized price for each. Nothing goes on the bill that was not quoted first.
- 4
We complete the work, usually the same visit. Our trucks carry common control boards, keypads, remotes, receivers, and antennas for LiftMaster, Mighty Mule, FAAC, and BFT. That means most access control repairs in Kennedale are done in one trip, not one trip to diagnose and another to fix.
- 5
We test it three ways before we leave. We open and close the gate from the keypad, from a remote, and from any phone or app-based access you use. You watch it work. Then we walk you through how to change codes and add users, and we leave you the 90-Day Done Right Promise in writing.
How Much Does Gate Access Control Cost in Kennedale?
Gate access control costs in Kennedale depend on what has failed and whether you are repairing or upgrading. A replacement keypad runs $150 to $350 installed. A new remote and receiver pairing typically costs $80 to $200, depending on the brand and receiver type. Phone entry systems start around $400 for a basic cellular unit and run higher for video-capable systems. A full video intercom installation with a camera, monitor, and app access generally lands between $900 and $2,500, and smart access controllers run $350 to $800 installed on most existing openers.
What moves the price is the condition of the existing wiring, the distance from the gate to the house, and whether the opener’s control board can accept the new access equipment. Older Mighty Mule and FAAC boards sometimes need a matching receiver module, which adds $60 to $120. We never quote a price by phone and then change it when we arrive. The free estimate we give on-site is the price, and it is agreed before any work starts.
Gate Access Control Near Kennedale - Our Service Area
Ironworks Gate Co. serves Kennedale homeowners and the surrounding communities, including Arlington, Forest Hill, Mansfield, Rendon, Bedford, Crowley, Burleson, Richland Hills, Grand Prairie, and Fort Worth. Most calls within this area get same-day or next-day service, and we carry the parts that keep you from waiting on a shipment. For homeowners just north or east of Kennedale, start with our Gate Access Control in Arlington page, or the Gate Access Control in Everman page for service to the south. And if you are comparing options, visit the home page for the full scope of what we do.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Access Control in Kennedale
Gate access control is any system that lets you open and close your gate from outside the property, or control who can open it. That includes keypads, remotes, phone entry, card readers, video intercoms, and smart app-based controls. In Kennedale, it is what separates a driveway gate from a real perimeter.
Most access control repairs and replacements take one to three hours on-site. A simple keypad swap is under an hour, while a video intercom with new wiring can take half a day. We tell you the expected time before we begin, and we do not leave until the system is tested and working.
Keypad replacements run $150 to $350, remotes and receivers $80 to $200, phone entry starts around $400, and video intercoms span $900 to $2,500. The exact price depends on your opener, the condition of existing wiring, and the distance from the gate to the house. Call (817) 286-7391 for a free on-site estimate with no obligation.
Yes. We service LiftMaster and Mighty Mule systems every week in the Kennedale area, along with FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. We stock common OEM parts for the most-installed brands, so most repairs are completed in one visit.
Yes. If your gate will not open and you cannot get a vehicle in or out, call (817) 286-7391 for Emergency Gate Access Control in Kennedale, TX and a live person will get you on the schedule. We keep same-day slots open for emergencies in Kennedale and the surrounding cities, and we arrive when we say we will.
Every access control installation and repair is covered by our 90-Day Done Right Promise, in writing. If something is not right after we leave, we come back and make it right. No paperwork, no arguing, no exceptions. That applies to the part and the labor.
Make sure we can get to the gate and the opener, which usually means clearing any tools or stored items from around the gate operator. Have your access codes or app login ready so we can test the system fully. Other than that, there is nothing you need to do. We bring the tools, parts, and test equipment.
Schedule Your Gate Access Control Service in Kennedale Today
If your gate access control is not working, or it’s time to add keypad or phone entry to your driveway, call Ironworks Gate Co. at (817) 286-7391 for a free, no-obligation estimate. Victor Salinas and his team have served Kennedale homeowners for over 42 years, and we answer the phone live, 24 hours a day, 7 days a week. We will give you a square price before any work begins, and back the finished job with the 90-Day Done Right Promise in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since 1984.