Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Fort Worth
Gate access control in Fort Worth is not just about keypads and remotes. It is about keeping a heavy pipe-rail gate swinging true on soil that actively fights the posts holding it up. Blackland Prairie clay swells and shrinks with every rain and drought, and any access system bolted to a leaning post will misbehave within a season or two. We have corrected enough of these to know the fix before we arrive. If you have a driveway gate that drags, a keypad that will not hold alignment, or a phone entry system that quit after the last ice storm, call (817) 286-7391 and we will get it sorted.
Why Ironworks Gate Co. Is Fort Worth’s Preferred Gate Access Control Company
We have spent over 42 years working gates in this region, and Fort Worth throws us challenges that cookie-cutter gate companies never see coming. The soil underneath homes off Rosedale and around Polytechnic Heights does not behave like the sandier ground you find further east. It expands and contracts with a force that snaps shallow concrete footings and tips posts out of plumb, and that directly affects how a keypad reads, how a remote receiver holds signal, and how a video intercom stays aimed at the driveway. Homeowners across Fort Worth call us because we factor the clay into every quote, and because our technicians arrive in uniform, background-checked, and ready to explain what actually happened before touching a single bolt.
Our Fort Worth customers also know the phone gets answered by a person, every hour of every day. No call tree. No answering service. And every completed job carries our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no argument. Victor Salinas, who leads our shop, set that standard when the company was founded in 1984, and it has never once been rolled back.
Our Gate Access Control Services in Fort Worth
We handle the full Gate Access Control scope on Fort Worth driveways, from standalone keypads to full phone entry and video intercom systems. Here is how we approach the calls we see most often in this part of town.
Keypad Entry
Keypad entry is the workhorse for Fort Worth homeowners who want a code on the pillar instead of a remote in every glovebox. The catch here is the post. In neighborhoods like Near Southside and Mistletoe Heights, many older gate posts were set 24 inches deep or less, which is not enough for this clay. We regularly reset hinge posts to 42 inches with a flared concrete pier before mounting the keypad, so the pad stays level, the wiring stays dry, and the gate latches where it should. A standard keypad installation in Fort Worth typically runs $350 to $700 on a solid existing post; a post reset with new concrete adds $400 to $900 depending on access and the size of the gate.
Remote Control
Remote receivers fail in two ways in Fort Worth: the heat bakes them during hundred-degree summers, and water finds them after hard storms. We see receivers mounted low where rain splashes the box, and receivers mounted high where the sun punishes the circuit board. Our crews reposition the receiver, install a weatherproof housing, and reprogram all remotes on site. A basic remote receiver swap or programming call runs $180 to $350, including the new receiver and up to two remotes.
Phone Entry
Phone entry systems let you buzz the gate open from inside the house or answer a call from a visitor at the driveway from anywhere. These systems tie into your existing landline or cellular network, and Fort Worth’s freeze-thaw cycle is hard on the external call box. We have replaced cracked faceplates and corroded terminal boards after Winter Storm Uri and dozens of lesser freezes since. Depending on the system, a new phone entry unit installed runs $650 to $1,400 in Fort Worth.
Card Reader
Card readers make sense for Fort Worth properties with frequent visitors, farm staff, or family members who prefer a tap over a PIN. Most residential installs use a proximity reader paired with the same controller that runs the operator. The reader itself is a simple device, but the wiring from the road edge to the house can be the real cost on a long Fort Worth driveway. A proximity card reader installed and paired to an existing operator usually runs $450 to $900, with additional cards at $10 to $25 each.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We are trained and equipped on nine gate-automation brands, and on Fort Worth job sites the ones we reach for most are LiftMaster, FAAC, and Viking. LiftMaster operators are common on standard residential swings and slides, FAAC shows up on heavier ornamental iron from the Stockyards-era ranches and estates, and Viking handles hydraulic and heavier-duty gates that need real torque. Because we stock parts for these brands locally, most Fort Worth repairs are completed in a single visit, with the price agreed before any work begins.
Common Gate Access Control Problems We See in Fort Worth Homes
- Leaning hinge posts throwing the keypad out of alignment. Fort Worth’s clay heaves with every wet-dry cycle, and a post set shallow will lean visibly within a year or two. The keypad still works, but the gate no longer lines up with the latch, and the safety edges fault out.
- Summer heat cooking remote receivers and warping wooden gate frames. Sustained hundred-degree heat here is different from Dallas or Houston. Rubber seals crack, boards twist, and the receiver’s range drops until remotes only work from ten feet away.
- Post-freeze actuator failures on hydraulic operators. After hard freezes like February 2021, we get a spike of calls where the gate’s phone entry and intercom work fine, but the motor will not turn. The hydraulic housing cracked, let in moisture, and froze the gearbox solid.
- False loop detector triggers from shifting concrete. The buried loop at the road edge tells your gate to open when a car pulls up. When Fort Worth’s soil moves, it can crack the driveway and the loop wire, causing the gate to cycle for no reason or fail to open at all.
Pricing for Gate Access Control in Fort Worth, TX
Here is honest money for the Fort Worth market. A basic keypad addition with existing solid posts runs $350 to $700. A full phone entry system averages $650 to $1,400. A video intercom system with a monitor inside the house runs $900 to $2,200 installed, depending on camera quality and wiring distance. A new gate operator paired with new access control on an existing residential gate typically lands between $1,200 and $3,000. The Fort Worth wildcard is always the post work. If your hinge post leans, add $400 to $900 for a proper reset with a 42-inch footing. Every quote is written and agreed before any work starts, so the number on the invoice matches the number on the estimate. Call (817) 286-7391 for a free estimate.
We recently replaced a Viking swing gate operator on a pipe-rail driveway gate in Polytechnic Heights where the original hinge post had heaved a full 3 inches out of the clay, causing the gate to drag and the safety photocell to fault every afternoon. Our crew pulled the post, augered a new 42-inch footing, poured a flared concrete pier, then rehung the gate and wired a LiftMaster keypad entry with a fresh loop detector at the road edge, and it now cycles clean even after a week of rain.
We Also Serve Cities Near Fort Worth
Our Gate Access Control in Fort Worth coverage extends to the surrounding area, including Haltom City, Hurst, Kennedale, and Bedford. The same crews, the same written pricing, and the same 90-Day Done Right Promise apply whether you are off East Lancaster or out on a county road past Kennedale.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Fort Worth
At minimum 36 to 42 inches, with a flared concrete pier wider than the post. Fort Worth’s Blackland Prairie clay expands when wet and contracts when dry, and any post shallower than that will lean within one or two wet-dry cycles, taking the keypad and gate alignment with it. Call (817) 286-7391 for a post inspection before you mount anything expensive to it.
Two likely culprits: the wooden gate frame has warped in hundred-degree heat, and the operator’s rubber seals have degraded, letting dust and moisture into the motor. Together they increase the resistance the opener has to fight, so it strains or faults in the afternoon. We replace the seals, realign the gate, and the operator usually settles down.
Yes, if it is sized honestly. A long Fort Worth driveway with a heavy pipe-rail gate needs a solar panel and battery bank that can hold through cloudy stretches and winter short days, not a small kit meant for a light residential gate. We have installed solar-powered LiftMaster and FAAC openers on acreage around the 76101-76103 corridor where running mains power was impractical.
Your hydraulic actuator housing cracked in the freeze, allowed moisture inside, and the gearbox seized when it refroze or rusted. The access control side stayed alive because it is low-voltage and separate from the motor power. That is a repair we do regularly in Fort Worth after hard freezes, and it is covered under our written 90-Day Done Right Promise.
Usually, yes. We pull the leaning post, auger the hole to 42 inches, pour a flared concrete pier, and reset the post in a day. We then remount the keypad at the correct height and rehang the gate so it latches properly. The gate itself almost never needs replacing, which saves you thousands compared to a full rebuild. Call (817) 286-7391 and we’ll quote the reset directly.
Call Ironworks Gate Co. for Gate Access Control in Fort Worth
Victor Salinas and the Ironworks Gate Co. crew have been doing gate work the right way since 1984. The 400th job gets the same care as the first, and every job is backed by our written 90-Day Done Right Promise. Whether you need a keypad added, a remote system rebuilt, a phone entry installed, or a leaning post reset before any of that makes sense, call (817) 286-7391. A person answers, we show up when we say, and the price is settled before a single bolt gets turned.
Written by Victor Salinas, Owner at Ironworks Gate Co., providing gate access control and gate services across Fort Worth, TX since 1984.