Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Everman
A new gate in Everman runs $1,400 to $6,800 for most residential work, and we quote every job in writing before a single bolt is turned. Ironworks Gate Co. serves Everman homeowners with swing gates, sliding gates, driveway gates, and security gates built to stand up to Blackland Prairie clay that moves more than any soil in Tarrant County. If your gate post leans, your operator groans, or you’re ready to replace a 50-year-old chain-link swing gate with something that actually closes square, call (817) 286-7391 and a live person answers, day or night.
Why Ironworks Gate Co. Is Everman’s Preferred Gate Installation Company
We’ve been doing this work for over 42 years, and the gates we’ve hung in Everman have taught us things no catalog can. This city sits on Blackland Prairie clay that shrinks and swells so aggressively between wet winters and dry summers that gate posts set without concrete in the 1970s can rotate several degrees in a single season. That means a straightforward “hinge adjustment” job on a home off Wichita Street or around the Everman Independent School District complex is often actually a full post re-set. We know that before we arrive, which saves you the cost of a temporary fix that fails by August.
Our techs work Everman’s older residential streets regularly. This is 76140 territory, with modest ranch homes built from the late 1950s through the 1980s, many still carrying their original galvanized swing gates. We’re not a general handyman crew picking up gate work between remodels. Gates are all we do, and Everman’s particular soil and housing stock mean we plan for heavy-gauge hardware and deeper footings from the first site visit. Victor Salinas leads our team, and the standard he sets hasn’t changed in four decades: do the job once, do it right, and stand behind it in writing.
Our Gate Installation Services in Everman
Driveway Gate Installation
Everman’s driveway gates are typically manual swing gates on 50 to 80 year old posts, and introducing automation to them without re-setting those posts first is how operators burn out in six months. We install the full range: single and double swing driveway gates for compact lots, sliding gates where setback is tight, and custom steel driveway gates built to match an existing fence line or stone entry. For homes south of Everman Parkway that are starting to add automated driveway access, we pre-wire for openers and keypads even when the customer wants a manual gate for now.
Pedestrian Gate Installation
Most pedestrian gates in Everman live beside a driveway or across a backyard walkway off Trammel Road, Bishop Street, and the side streets running toward Enon Avenue. The common failure in this city is a post that’s been pushed out of plumb by clay heave, which leaves the latch a half-inch shy of catching. We set new posts deeper than code minimum because the soil here demands it, then hang the gate with a latch and hinges that tolerate small movements without binding.
Sliding Gate Installation
Sliding gates suit Everman homes with sloped or short driveways where a swing gate would clip a car or block the sidewalk. But ice is the enemy here. Southern Tarrant County’s periodic winter ice storms coat exposed rack and pinion tracks, freezing gear teeth and stripping drive gears when someone forces the gate open. We build Everman sliding gate installations with the rack set to drain properly and keep moving parts accessible for the cold-weather maintenance that prevents a $400 gear replacement in February.
Swing Gate Installation
Swing gates are what most Everman homeowners already have, and most of them are decades past their service life. Our swing gate installations start with the footing, not the gate. We bore through the clay, set steel posts in reinforced concrete, and only then hang and align the gate. For double gates, we match the leaf physics so both sides carry evenly; a mismatched pair drags, sags, and eventually twists the hinge posts out of square. Whether it’s a welded steel privacy gate on a corner lot or a simpler tube frame on a ranch home, the gate gets built or hung to stay level.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We’re trained and equipped across nine gate automation brands, and for Everman homeowners that matters most on the repair side: if you’ve got a LiftMaster operator that’s been groaning for a year or a FAAC unit that lost its limits after the last freeze, we diagnose and fix it correctly on the first visit. We also install and program Mighty Mule and BFT openers where they’re the right fit. We carry common parts on our trucks and can get most Everman jobs done in one visit. No “we’ll order that and come back in three weeks.”
Common Gate Installation Problems We See in Everman Homes
- Post heave from Blackland Prairie clay. The clay under Everman shrinks and swells aggressively between wet winters and dry summers, twisting gate frames until hinge posts lean and gates drag or stop latching. The fix is almost always a full post re-set, not a hinge tweak.
- Undersized footings from 1970s tract construction. Everman’s original builders often set chain-link posts with little or no concrete. When we add a gate operator to those posts, the torque can pull them farther out of plumb within months. That’s why our installations call for larger footings and heavier steel than the original build.
- Frozen mechanisms after an ice storm. Ice events hit the DFW area reliably most winters, and exposed sliding gate racks and latch hardware freeze solid. Forcing the gate open strips gears and bends brackets. We design Everman installations with drainage and shielding in mind from day one.
- Manual gates that never get upgraded because operators aren’t matched to the soil. Homeowners who want automation often hold off because a neighbor’s operator failed a year in. The problem is usually the underlying post and base, not the motor. We install operators on properly set posts so the opener is the last thing to fail, not the first.
Pricing for Gate Installation in Everman, TX
What you’ll actually pay depends on gate size, material, and whether the old posts can be salvaged. A basic single swing chain-link gate replacement in Everman typically runs $400 to $900. A new steel tube-frame driveway gate with powder coating runs $1,600 to $3,400. Double swing driveway gates and full custom ornamental steel gates on reinforced concrete footings run $3,500 to $6,800, and adding an operator, keypad, and safety photocells typically adds $1,200 to $2,800 depending on brand and gate weight. We quote every price up front in writing, before work starts, and the number on the quote is the number you pay. Call (817) 286-7391 for a free estimate.
We Also Serve Cities Near Everman
Everman sits in a southern Tarrant County pocket, and our Gate Installation team works the surrounding cities regularly: Kennedale, Arlington, Forest Hill, and Mansfield. If you’re reading this from a few miles away in any direction, the same pricing, the same written guarantee, and the same live-person phone support apply. This page is written for Everman homeowners specifically, but our Everman service area extends out to meet you.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Everman
Your post is being moved by the soil, not the hinges. Everman sits on Blackland Prairie clay that expands when wet and contracts during dry spells, heaving shallow posts several inches per season. If the post was set without a proper concrete footing in the 1970s or 1980s, no amount of hinge tightening will stop it from leaning. The real fix is to pull the post, bore a wider and deeper hole, set new steel in reinforced concrete, and re-hang the gate. We do this work regularly in Everman, and we’ll quote the whole job in writing before we start. Call (817) 286-7391 for a free estimate.
Yes, we can. Many Everman homes have chain-link perimeter fencing, but you don’t have to match a new ornamental gate to chain-link posts. We can set independent steel posts for an ornamental gate at the driveway or walkway opening, which gives you a custom iron look without replacing your entire fence. We’ve built and hung wrought-style security gates on Wichita Street, Bishop Street, and homes throughout the 76140 area. The same 90-Day Done Right Promise applies to every gate we install.
An operator mounted on a moving post will bind, strip gears, and eventually burn out. The operator itself is rarely the problem; the post and base are. We spec deeper, wider concrete footings for any Everman installation with automation, and we anchor operators to steel posts that are engineered for the clay’s movement. This is the main reason our clients’ operators in Everman last: the motor is hung on a foundation that doesn’t move. Call (817) 286-7391 and we’ll assess your current post and operator mounting before you spend money on a new motor.
For most Everman double swing gates, the answer is no. The Texas heat shortens battery life, and the heavy leaf weight of a double gate demands more consistent power than a solar panel can usually deliver in a residential setting, especially with trees or shade involved. A low-voltage AC run from the house or a dedicated transformer is the more dependable setup. If you specifically want solar, we’ll talk through your gate’s weight, your panel’s sun exposure, and the realistic maintenance schedule before you buy. Either way, we quote both options in writing.
The freeze likely let moisture into the rack and pinion assembly, and the expanding ice either bent the gate rail or caused the drive gear to jump teeth. Once that happens, the operator’s limit settings no longer match the gate’s actual travel, so it stops short or reverses early. We see this every winter in Everman. The fix may be a gear and rack alignment, or a full slide rail replacement if the teeth are stripped. Call (817) 286-7391 and one of our techs will diagnose it on site, quote the repair, and do the work with the price agreed up front.
Contact Ironworks Gate Co. for Gate Installation in Everman
If you’re in Everman and you’re tired of looking at a gate that drags, leans, or won’t latch, call (817) 286-7391. A live person answers 24 hours a day, seven days a week. We’ll schedule a visit at your convenience, give you a written quote before any work starts, and back the finished job with our 90-Day Done Right Promise. Senior and veteran homeowners get a permanent 5% discount, and right now you can take $50 off any repair over $250. We’d rather do the job once and have you call us again in ten years than sell you a cheap fix that fails next season.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Everman and surrounding Tarrant County communities.