A Ironworks company - serving Kennedale, TX
Gate Installation in Rendon, TX | Ironworks Gate Co.

Gate Installation in Rendon - Written Price, Install Date Set

Free on-site survey and a written price that includes the groundworks, the power run and the safety gear. Install date agreed before we order, and the system handed over tested and documented.

Call to schedule your free estimate

15+
Cities Served
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Fast, Reliable Gate Installation Across Rendon

Gate installation in Rendon means working with acreage lots, long gravel driveways, and the Houston Black clay that shifts under every post we set. A new driveway gate here typically runs $2,800 to $9,500 depending on whether you need a swing or slide panel, the operator brand, and how deep we have to set footings below the shrink-swell zone. We’re Ironworks Gate Co., and we’ve been building and hanging gates since 1984. Victor Salinas leads our crew, and we answer the phone at (817) 286-7391 whenever you call. Most Rendon jobs get scheduled within a week, and we handle the county permitting paperwork so you don’t have to chase it.

Call (817) 286-7391

Our Gate Installation team works on the gate types Rendon actually uses: heavy slide gates on rack and pinion systems, swing gates built for wide farm entrances, and pedestrian gates that survive livestock pressure. We know the difference between installing in Rendon’s unincorporated county jurisdiction versus the incorporated suburbs around it. That knowledge keeps your project moving instead of tangled in red tape.

Why Ironworks Gate Co. Is Rendon’s Preferred Gate Installation Company

The first thing Rendon homeowners tell us is that they’ve had a gate fail and the last contractor didn’t come back. We hear it regularly. Our answer is the same every time: every job we complete carries the 90-Day Done Right Promise in writing. If the gate isn’t right, our Gate Repair - Rendon team comes back and makes it right. No paperwork battles, no arguing. That’s the Keystone Standard, and it applies to a $300 hinge repair the same as it does to a $12,000 custom driveway gate installation.

We also understand Rendon’s unincorporated reality. Tarrant County permitting for automatic gate operators works differently than in Arlington or Fort Worth, and many older Rendon properties have gates that were put in without inspections. Victor Salinas and our technicians know what the county wants to see: UL 325 entrapment protection, properly rated operators, and post footings that go below the clay’s active zone. We handle that from the start.

When you call (817) 286-7391, a live person answers. Not a voicemail tree, not a callback queue. We schedule Rendon jobs directly, and our technicians arrive in uniform, background-checked, and ready to do the work the same way they’d work on their own mother’s property.

Our Gate Installation Services in Rendon

Driveway Gate Installation

Most Rendon properties need a driveway gate wide enough for a truck and horse trailer, and long enough to close off a gravel or asphalt entrance that runs 100 feet or more from the road. We build and install double swing gates and single slide gates sized for those openings. Our Gate Installation team sets posts in concrete footings that reach below the clay’s shrink-swell zone, which is the difference between a gate that operates cleanly for a decade and one that drags by August.

Driveway Gate Installation

Pedestrian Gate Installation

On Rendon acreage, pedestrian gates take real punishment. They get used multiple times a day for feeding, walking fences, and letting family in and out. We hang self-closing spring hinges, install latch hardware rated for constant use, and frame them so the post movement from clay soil doesn’t bind the latch plate. If you need a keypad or card reader on the pedestrian gate, our Rendon Gate Access Control technicians run the wiring and set the access codes while we’re there.

Pedestrian Gate Installation

Sliding Gate Installation

Sliding gates are the solution when a swing gate won’t clear the driveway or a shared right-of-way leaves no room to swing a panel. On Rendon properties with long frontage and shared driveways, we install cantilever slides and rack and pinion slides with operators from LiftMaster, FAAC, and BFT. The concrete pad and track have to be dead level, and on Rendon’s clay that means more excavation and a deeper base than most installers bother with. We do it right, and the gate stays square through the wet-dry cycle.

Sliding Gate Installation

Swing Gate Installation

A swing gate on a Rendon horse property has to clear a driveway surface that may be gravel, may be asphalt, and may have settled unevenly. We hang swing gates with adjustable hinge hardware and set the posts deep enough that summer shrinkage doesn’t throw the panel out of plumb. For double gates, the center latch and drop rod get sized for the gate’s full weight plus wind load, which matters when North Texas fronts come through.

Swing Gate Installation
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (817) 286-7391

What happens when you call

  1. 1
    A real person answersNo phone trees - you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Trusted Brands We Service in Rendon

We’re certified to work on nine gate automation brands, and on Rendon installations we most often install LiftMaster, FAAC, BFT, and Viking operators. That covers the brands already on many Rendon properties and the ones we recommend for new installs. Because we stock Gate Parts & Welding - Rendon inventory for these lines, we don’t leave a gate hanging open while we order a board from out of state. If your existing operator fails and it’s a FAAC or Linear unit, we can usually diagnose and repair it on the first visit. No game of parts roulette.

Common Gate Installation Problems We See in Rendon Homes

  • Clay heave throws hinge posts out of plumb. The Houston Black gumbo under Rendon swells after a wet spring and contracts in August drought. A post set too shallow shifts, and the swing gate sags and drags on the gravel within months. Our footings go below the active zone, usually 36 to 48 inches, so the post stays where we put it.
  • Shared driveway rights-of-way force slide gates into tight setbacks. Two neighbors, one entrance, and a slide gate squeezed against a fence line leaves no room for error in track alignment. When the rack shifts, the chain binds and the operator burns out. We’ve rebuilt several of these on Rendon properties and set the track with extra compaction so it stays true.
  • Underpermitted DIY setups lack entrapment protection. Older Rendon gates often have no photo-eyes, no edge sensors, and no loop detector. That’s a safety problem and a Tarrant County code issue. We retrofit these during installation and include the UL 325 compliance the county expects when they inspect.
  • Ice storm damage stresses hinges and operators. When an ice storm hits this corridor, frozen panels get pushed by wind and the operator fights the extra load. Hinges bend, rack teeth strip, and gearboxes fail. We use heavier hinge barrels and operator models with enough torque headroom for the ice loads Rendon actually sees.

Pricing for Gate Installation in Rendon, TX

A single swing gate with a basic operator on a Rendon driveway typically runs $2,800 to $5,500. A sliding gate on rack and pinion runs $4,200 to $9,500 depending on gate length, operator choice, and whether we’re running power to a new location. Pedestrian gates with keypad access start around $1,200 and go up from there. Double swing gates for wide farm entrances fall in the $5,000 to $12,000 range. Every quote is written, line-itemed, and agreed before a single bolt gets turned. You’ll never see a surprise on the bill. Call (817) 286-7391 for a free estimate, and ask about the $50 off any repair over $250 or the 5% senior and veteran discount if either applies.

We Also Serve Cities Near Rendon

Our Rendon crew regularly works in Kennedale, Arlington, Everman, and Forest Hill. If your property sits near the county line or you have family with a gate problem in one of those cities, call the same number: (817) 286-7391. We schedule the whole area out of our Dallas-Fort Worth office and dispatch locally.

Serving Rendon, TX - Our Local Coverage Area

We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Gate Installation in Rendon

Why Rendon’s Clay and County Rules Change How We Build

Rendon’s unincorporated status means most gate installations fall under Tarrant County permitting rules, not city codes, and many older setups lack proper inspections and UL 325 entrapment protection. Our crews regularly retrofit photo-eyes and edge sensors that a neighboring Fort Worth suburb would have required from day one. That’s one reason we don’t treat Rendon like a bedroom community: the rules are different, the soil is different, and the gates have to be built for both.

On a horse property off Rendon Road, we replaced a failing swing gate with a slide gate on a rack and pinion because the clay soil had heaved the hinge post so far out of plumb that a swing panel would not clear the driveway. Our crew set new post footings below the shrink-swell zone, installed a LiftMaster operator with safety photocells, and kept the pedestrian gate and keypad entry working while we rebuilt the main entrance. That’s the kind of job we do in Rendon more than anywhere else: gates that have to work for horses, trailers, shared driveways, and county inspectors all at once.

Contact Ironworks Gate Co. for Gate Installation in Rendon

If you’re ready to replace a failing gate or install a new one on your Rendon property, call (817) 286-7391. We’ll schedule a free measure, write a line-itemed quote, and agree on the price before we start. No surprises, no pressure, no waiting through a phone tree. Victor Salinas and our crew have been building gates that hold up to North Texas clay, ice, and livestock for over four decades. Done right, and backed in writing.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon and surrounding communities.

Why Rendon Chooses Ironworks Gate Co.

We set the standard for gate installation in Rendon.

30-60 Min Response

Fast dispatch across Rendon. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Rendon

Getting your gate installation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate installation needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Rendon - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local gate installation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Rendon Customers Say

Trusted by homeowners across Rendon and surrounding areas.

★★★★★

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

Eric Padgett · Verified customer
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson · Verified customer
★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram · Verified customer

Ready for Gate Installation in Rendon?

Call now for a free estimate - or request one below. Licensed, insured, and here with fast after-hours help in Rendon.

(817) 286-7391

Request a Free Estimate in Rendon

Tell us about your gate installation needs - we'll respond within the hour.

By requesting your free estimate, you acknowledge our Privacy Policy and consent to receive communications by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Send a Text
Local Service Coverage
Call Now - Fast Dispatch