Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Rendon
Gate parts and welding in Rendon usually means one of three things: a hinge post that the black gumbo clay has shoved out of plumb, a slide gate roller that finally gave out on a shared driveway, or a weld that cracked under years of horse and tractor traffic. We handle all three, and most jobs are done in a single visit. If your gate is dragging, sagging, or refusing to latch, call (817) 286-7391 and a live person will answer.
Rendon is different from the suburbs around it. The lots are bigger, the driveways are longer, and a lot of the gates out here were welded in place before automatic openers ever got bolted on. That combination keeps our Gate Parts & Welding crews busy every season, because the soil moves and the steel has to move with it, or something breaks.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Parts & Welding Company
We’ve been welding and repairing driveway gates for over 42 years, and Rendon’s acreage properties are a big part of what we do. Homeowners out here tend to stay put for decades. They know their land, they know their gates, and they know the difference between a patch job and a repair that holds. That’s who we built this company for.
Victor Salinas leads a crew of background-checked, uniformed technicians who work on gates the way they’d work on their own mother’s property: clean, careful, and square. Reviews from Rendon customers come back to the same themes: the price was settled before the first bolt turned, the crew showed up when they said, and the gate worked when they left. Most calls from Rendon get a same-day or next-day dispatch, because we know a dead gate on a horse property isn’t something you can ignore until Friday.
Every job here, whether it’s a hinge replacement or a full post re-set, is covered by our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No forms, no argument, no exceptions.
Our Gate Parts & Welding Services in Rendon
Hinge Replacement
On a Rendon swing gate, the hinge does more than hold weight. It also absorbs the seasonal movement of Houston Black clay, which expands when wet and contracts hard during summer drought. When a hinge gets loose or the post behind it shifts, the gate starts grinding gravel and the latch misses by an inch. We replace hinges with sized and welded hardware matched to the gate’s actual weight, not the weight it had when it was first hung. If the post is the problem, we address that at the same visit.
Post Replacement
Post replacement in Rendon is a different job than it is in town. The old post is usually set in black gumbo that has heaved it out of vertical over years of wet-dry cycles. Digging it out, setting a new post deeper, and welding the gate back square is the real fix. We don’t just concrete a wobbly post in place and call it done; we set it so the next August drought doesn’t undo the work by Labor Day.
Rail Repair
Pipe-panel and steel rail gates take a beating on Rendon’s farms and horse properties. Livestock lean on them, tractors clip them, and the constant vibration from opening and closing works cracks into old welds. We cut out the fatigued section, weld in new steel, and reinforce the joint so it outlasts the original. On a working farm, that gate has to hold, because a downed gate means loose stock on Rendon Road.
Custom Welding
Not every fix is a straight replacement. Sometimes a homeowner off Rendon-Newark Road needs a gate extended to match a new fence line, a pedestrian pass-through cut into a taller panel, or a rack re-attached to a slide gate that was never built for an opener in the first place. Our custom welding work handles those in-between jobs. We measure on site, quote a written price, and weld it with the same care we’d give a new gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
Our Gate Parts & Welding technicians work on gate operators from FAAC, BFT, Linear, and Viking, among others. It matters because the welding and the automation have to agree with each other. A perfectly square gate with a misaligned rack will still fault the opener. We stock common rails, rollers, hinges, and latch hardware for the brands you see most on Rendon driveways, which keeps turnaround fast when your gate is down and the horses are waiting to get in.
Common Gate Parts & Welding Problems We See in Rendon Homes
- Clay-heaved hinge posts. The Houston Black clay under this part of southern Tarrant County shrinks in summer and swells in winter, and a swing gate’s hinge post goes out of plumb a little more each year. The latch misses, the panel drags, and the hinges bend. We re-plumb the post, re-weld the hinge, and re-set the operator so the gate closes square again.
- Slide gate rollers worn flat on shared driveways. Shared driveway rights-of-way force slide gates into tight setbacks, and a failed roller or bent rack leaves the gate dead-blocking vehicle access. We replace rollers, straighten or re-weld the rack, and get the gate moving without closing the driveway any longer than necessary.
- Underpermitted DIY slide gates lacking entrapment protection. Because Rendon is unincorporated Tarrant County, many automatic gates were installed without city inspections. We see sagging panels, missing safety edges, and operators that keep reversing and eventually burn out the motor. The welding repair fixes the panel; we also flag the safety gaps so the gate meets UL 325 before it hurts someone.
- Cracked welds at the post-to-rail joint. Decades of temperature swings and gate weight flex the oldest welds until they fail. On a 1980s ranch gate, the failure usually starts at the top hinge corner and runs down the rail. We cut, re-weld, and add a gusset so the crack doesn’t come back.
Pricing for Gate Parts & Welding in Rendon, TX
A hinge replacement on a standard square-tube swing gate in Rendon typically runs $240 to $420 per hinge, including labor and hardware. Post replacement is the bigger job: digging out a heaved post, setting a new one deeper, and re-hanging the gate usually falls between $650 and $1,400 depending on gate width and whether we’re matching an existing fence line. Rail repair and custom welding run $180 to $600 depending on the length of the cut and the amount of steel we’re putting back in. Slide gate roller replacement starts around $260 per roller set.
Every quote is settled before work starts. You’ll know the number when we give it to you, and it won’t change while the welder is running. Call (817) 286-7391 for a free estimate on any of this. We also offer a free second opinion on any written estimate you already have, and there’s $50 off any repair over $250.
We Also Serve Cities Near Rendon
If you’re just across the line in Kennedale, Arlington, Everman, or Forest Hill, our Gate Parts & Welding in Rendon crews serve those areas too. The soil behaves differently in the sandy suburbs north of here, but the standard of work doesn’t change. Call and we’ll put you on the schedule.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Rendon
The new post was likely set shallow or without enough concrete footprint for Houston Black clay, which moves more than most soils in North Texas. A post set in April can be visibly out of vertical by August as the clay shrinks. The fix is digging deeper, widening the footing, and re-setting the hinge geometry to tolerate seasonal movement. Call (817) 286-7391 and we’ll look at what’s moving and why.
Yes. We plan slide gate work on shared driveway rights-of-way in stages: secure the gate on temporary blocking, complete the weld or roller replacement in position, and keep one lane passable whenever the driveway layout allows it. On narrower shared drives, we schedule the work and tell all parties exactly which hours the gate will be down. We know these driveways out here, and we know the neighbor conversation matters as much as the weld.
On horse properties here, it’s usually both. A sagging panel or a heaved post creates enough resistance that the operator’s entrapment protection keeps reversing the gate. The operator is doing its job; the steel behind it is what changed. We re-square the gate, re-weld the hinge or roller assemblies, and then re-set the operator limits. If the motor has burned out from repeated reversing, we address that too. Call us before you replace the opener; the gate itself may be the root cause.
We do, and it’s a job we’ve done many times on Rendon acreage driveways. The old post gets cut or pulled, the hole gets deepened, the new post gets set in a footing sized for the soil movement, and the gate gets welded back square. It’s not a one-afternoon job, but it’s the only fix that lasts on these clay lots. Free estimates, written price before we start.
Any time you change the structure of an automated gate, you change the entrapment and safety profile, and the finished gate must still meet UL 325. That covers things like the safety photocell beam staying unbroken, proper force settings, and entrapment protection on the leading edge. Because many Rendon gates were built before operators were added and never inspected under county jurisdiction, we check these details as part of the welding repair and flag anything that makes the gate unsafe. Call us and we’ll put eyes on it.
If your Rendon gate needs parts, a welder, or both, call (817) 286-7391. A live person answers, 24 hours a day. We’ll give you a square deal, a written price, and a gate that works when we drive away.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon residents with gate parts and welding since 1984.