Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rendon
Gate repair in Rendon, TX usually falls into one of two categories: a gate that won’t open at all, or a gate that opens but drags, sags, or refuses to latch. Both are fixable, and we handle them every week out here. The trick with Rendon properties is that most gates sit on long private driveways over Houston Black clay soil, and that soil moves more than people expect. It heaves in winter, shrinks in August, and takes your gate posts with it. If your gate is acting up, call (817) 286-7391. We’ll send a technician who knows Rendon’s terrain, not someone reading a GPS for the first time.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Repair Company
We’ve spent over 42 years doing one thing: gates. Driveway gates, estate gates, slide gates, swing gates, and the operators that move them. That focus means we’ve seen nearly every failure a Rendon property can produce. When a homeowner off Rendon Road calls about a gate that suddenly won’t close, we already know the likely culprit before the truck leaves the shop: Houston Black clay shifting a post out of plumb, or a rack and pinion packed with dust from a dry Tarrant County summer. Our technicians arrive in uniform, background-checked, and carrying the parts they’ll most likely need. Most jobs in Rendon are completed in a single visit.
We answer our phones around the clock with a live person. Not a voicemail tree, not an answering service. When your gate is stuck open at 6 a.m. on a Tuesday and your horses are eyeing the road, that matters. Victor Salinas leads our team, and the standard he set from day one is simple: price the job before a single bolt is turned, finish it right, and stand behind it in writing. That’s the Gate Repair work we do, and we back every Rendon job with our 90-Day Done Right Promise.
Our Gate Repair Services in Rendon
Electric Gate Repair
Electric gates fail for three reasons in Rendon: power issues, control board failures, or wiring that was never quite right to begin with. Many gates out here were installed when the homes were built, and some weren’t wired to current code. We diagnose the whole system, from the keypad to the motor to the safety loop, then quote a fix that addresses the cause rather than the symptom. If a gate opens sometimes and not others, that’s often a bad connection at a splice point or a photocell that’s drifted. We find it.
Automatic Gate Repair
Automatic gate operators on acreage properties take a beating. Dust, livestock, repeated cycles, and long wiring runs all stress the motor and controls. We service all major brands, including LiftMaster, FAAC, Mighty Mule, and BFT. In Rendon, we see a lot of operators that were installed without county inspections, which means safety edges and photo-eyes were sometimes never properly configured. We test entrapment protection as part of every automatic gate repair, because a gate that moves without working safeties is a gate that can hurt someone or something. We set it right.
Hinge & Post Repair
Here’s the thing about Rendon: your gate post is buried in Houston Black clay, and that clay is not your friend. It expands when wet and shrinks when dry, and over the course of a single year a perfectly plumb post can lean enough to make a swing gate drag or fail to latch. We re-set posts in new concrete footings, reinforce hinge points, and replace worn barrels and bearings. This is the repair that fixes the cause, not the symptom. If you’ve ever re-hung a gate only to watch it sag again six months later, the post is almost always the real problem.
Gate Realignment
A gate that scrapes the driveway or won’t latch is rarely a broken gate. It’s a gate that’s out of square because the post moved or the hinges wore. We re-align swing and slide gates across Rendon regularly, and we don’t just force the gate back into position. We check the post, the hinges, the operator track, and the mounting points, then make the adjustments that hold. On slide gates, we clean and lube the rack and pinion, adjust the guides, and re-set the travel limits so the operator isn’t fighting itself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We carry repair experience and local stock for the operators most common on Rendon driveways. LiftMaster, FAAC, Mighty Mule, and BFT parts are what we reach for first, and our technicians are factory-trained on nine major brands, from DoorKing to Viking to Ghost Controls. That breadth matters because your opener isn’t something we want to guess at. We diagnose it properly and fix it the same day when we can. If we need a part we don’t have on the truck, we’ll tell you when it’ll be in and when we’ll be back. No mystery, no disappearing act.
Common Gate Repair Problems We See in Rendon Homes
- Clay-driven post heave: Houston Black soil under Rendon expands with winter moisture and contracts in summer drought. That cycle pushes gate posts out of plumb, making swing gates sag and slide gates bind. This is the single most common gate problem on acreage properties here, and it’s why we re-set posts more often in Rendon than we do in the sandy-soil suburbs to the north.
- Slide gate rack and pinion clogging: Long gravel or asphalt driveways mean dust. Slide gates pick that dust up and pack it into the rack teeth and drive gear. When the rack binds, the operator grinds, and the gate stops moving. We clean, adjust, and re-align the drive train, then set travel limits to match the actual gate travel.
- Non-functional safety photo-eyes and edge sensors: A surprising number of automatic gates in unincorporated Rendon were installed without county inspections, and some were wired by the previous homeowner or a handyman. That often means the entrapment protection was never set up correctly, or it’s been knocked out of alignment and ignored. We test photo-eyes and edges on every job and repair them so the gate actually stops when it should.
- Worn hinges on heavy steel gates: Ranch gates and estate gates are heavy. After enough cycles, the hinge barrels wallow out and the gate drops. We rebuild hinge points with new bushings and pins, reinforce the mounting plates, and re-hang the gate so it swings true.
Pricing for Gate Repair in Rendon, TX
You should know what gate repair costs in Rendon before you commit. A gate realignment or hinge repair typically runs $180 to $320, depending on the size of the gate and the condition of the posts. Re-setting a post in new concrete runs $250 to $450 per post. Automatic gate operator repair, including diagnostics, runs $200 to $400 for most common failures; a full operator replacement on a heavy slide gate is typically $1,200 to $2,800 installed, depending on the opener and the length of the run. Photo-eye and safety edge testing and repair typically adds $85 to $150. Every job is quoted and agreed before we start, and there’s a standing $50 off any repair over $250. Senior and veteran customers always get 5% off. Call (817) 286-7391 for a free estimate, and remember: you get a written 90-Day Done Right Promise on every job.
We Also Serve Cities Near Rendon
Ironworks Gate Co. serves Gate Repair in Rendon and the surrounding Tarrant County communities. When you call from Kennedale, Arlington, Everman, or Forest Hill, we dispatch the same local crews and the same upfront pricing. Distance doesn’t change how we quote or how we stand behind the work.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Rendon
The cause is the Houston Black clay under your gate posts. Winter moisture makes the clay swell and heave the post, then summer drought makes it shrink and the post settles. The result is a post that’s slowly leaning, and every degree of lean multiplies into inches of gate sag by August. We fix it by re-setting the post in a deeper concrete footing and re-hanging the gate true. It’s the only fix that lasts, and it’s one of the most common repairs we do in Rendon. Call (817) 286-7391 and we’ll come look at your post before it gets worse.
Yes. We work on shared driveways in Rendon regularly, and we know that both homes need vehicle access while the gate is being repaired. We stage our work so the gate is manually operable during the job, and we coordinate with both property owners when we need to interrupt access for testing. Most slide gate repairs take under two hours on site, so the full blockage time is short. We’ll tell you exactly when the gate must be out of service and for how long before we start.
Repairing an existing gate operator, hinges, posts, or panels does not require a permit from Tarrant County in most cases. Replacing an operator on an existing gate generally doesn’t require one either, but new electrical runs from the panel to the gate may. Because Rendon is unincorporated, you’re under Tarrant County rules rather than a city permitting office. We can tell you during the estimate whether your specific job triggers any county requirement, and we’ll handle the paperwork if it does. Call (817) 286-7391 and we’ll sort it out for you.
You don’t, unless someone tests them. Photo-eyes can be misaligned, wired backward, or bypassed entirely, and the gate will still open and close just fine until something is in the way. We test every set of photo-eyes and edge sensors on every automatic gate repair, using the same obstruction tests required by code. If your gate doesn’t reverse when a pair of boots or a hay bale breaks the beam, your safeties aren’t working. That’s a safety issue for horses, kids, and anyone walking through the gate. We’ll test yours and fix it if it fails.
We can fix it so it stays put for years, and that’s the honest answer because no post in Houston Black clay is truly permanent without extraordinary measures. We dig out the old footing, set a new post in a wider and deeper concrete pier, and use rebar to tie the footing into stable soil. For gates that have already shifted multiple times, we may recommend a stouter post or an additional support pier. This is the repair we just completed on a Rendon property off Rendon Road, where the clay had heaved the post footing over winter and thrown a LiftMaster slide gate out of alignment. We poured a new footing, re-set the operator, and re-aligned the rack so the gate moved smoothly again. Call (817) 286-7391 for a free estimate on your post.
If your gate is dragging, stuck, or refusing to close, don’t wait until it fails completely at the worst possible moment. Call (817) 286-7391. We answer live, 24 hours a day, and we’ll get a technician to your Rendon property fast. Free estimates, upfront pricing, and a written 90-Day Done Right Promise on every job. That’s how we’ve done it for over 42 years, and that’s how we’ll do it for you.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarrant County and the Dallas-Fort Worth metro since 1984.