Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Rendon
Gate motor repair in Rendon, TX typically costs $280 to $680 depending on the failure, while a complete operator replacement commonly runs $1,400 to $3,200 installed. Most repair calls we handle here get answered by a live person and scheduled within one to two business days. If you live off Rendon Road, Kelly Elliott Road, or along the unincorporated stretches of Tarrant County east of 35W, we know your gate situation better than most shops that never leave the paved subdivisions.
Victor Salinas leads our Gate Motor & Opener team, and he has seen every way a large-lot driveway gate can fail. Call (817) 286-7391 for a free estimate, quoted and agreed before any work starts.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Motor & Opener Company
Rendon is not a typical suburban market. Most homes sit on half an acre or more, with long gravel or asphalt drives, horse fencing, and gates that get worked hard by livestock and weather. That is precisely the kind of property we have been serving for over 42 years, since Ironworks Gate Co. was founded in 1984.
Homeowners in Rendon call us because we understand what Houston Black clay does to a gate over a single season. We have corrected enough shifted posts, burned-out motors, and stripped gears to know exactly what to look for before we touch a single bolt. Our Gate Motor & Opener in Rendon customers also get something unusual from a gate company: a written 90-Day Done Right Promise on every job. If it is not right, we come back and make it right. That applies from the first job to the 400th.
Technicians arrive background-checked and in uniform. A live person answers the phone 24 hours a day, 7 days a week. No voicemail trees. No callback queues.
What Rendon Homeowners Tell Us
The most common sentence we hear is some version of: “The last guy installed it and we never saw him again.” Many Rendon gates were put in by general contractors or property owners themselves, often without an inspection because the area is unincorporated Tarrant County. That means no city permit office checked the footing depth, the operator mounting, or the wiring. We fix those installations regularly, and the difference after a proper re-set is immediate.
Our Gate Motor & Opener Services in Rendon
Motor Installation
Installing a gate operator on a Rendon property usually means working with existing gate panels that may have been hung years ago, on posts that have moved with the clay. We mount the operator, set the travel limits, wire the controls, and install safety photocells. A new motor on a standard driveway gate in Rendon typically runs $1,400 to $3,200 installed, depending on gate length, weight, and whether battery backup and loop detectors are included. The price is settled before we begin.
Motor Repair
Motor repair in Rendon is our highest-volume call, and most jobs are completed in a single visit. We replace burned windings, worn capacitors, stripped drive gears, and failed control boards. A typical repair runs $280 to $680. Many of the motors we replace in Rendon failed not from age but from fighting a gate that never should have been forced to move against shifted posts or winter ice.
Linear Motor
Linear arm operators are common on Rendon swing gates, especially on ranch-style properties built in the 1980s and 1990s. We stock and service Linear brand motors specifically because so many local gates use them. When the arm’s internal limit switches fail or the worm gear strips, we can often rebuild the operator in the driveway rather than replacing the entire unit, which saves genuine money.
Slide Motor
Slide gates dominate Rendon’s acreage properties. Long drives with no room to swing a gate inward or outward need a slide track, and the motor has to handle a heavy panel moving across an uneven surface. We replace slide motors, repair rack and pinion damage, and re-set tracks that have shifted with soil movement. If your slide gate stalls halfway or grinds, call before the motor burns out completely. A slide motor replacement in Rendon typically runs $1,800 to $3,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We are trained and equipped on nine gate-automation brands, and in Rendon we work on Viking, Linear, FAAC, and BFT most often. Those four names cover the majority of operators we see on local acreage properties. Because we stock common parts for these brands on our service vehicles, a repair visit usually wraps up in one trip. Viking and BFT slide operators in particular are common on Rendon’s larger horse properties, so we keep the boards and limit switches those units need.
Common Gate Motor & Opener Problems We See in Rendon Homes
- Clay soil heave shifts hinge posts out of plumb. The expansive Houston Black clay under southern Tarrant County swells after rain and shrinks in drought. A swing gate that closed fine in April may drag or fail to latch by August. Re-plumbing posts and re-setting operators seasonally is normal maintenance here, not an anomaly.
- Winter ice storms jam slide gates and strip gears. Ice coats the rack and pinion on slide operators, and when the motor tries to force a frozen carriage, it can strip the drive gear in seconds. After an ice event, we get a run of calls from Rendon for gear replacements and limit-switch resets.
- Safety photocells misalign after livestock bump the gate frame. Horses lean, cattle push, and when a photocell moves a half-inch out of alignment the gate will refuse to close or reverse for no reason you can see. Constant reactivation from a misaligned cell can overheat and burn out the operator relay.
- Underpermitted DIY installs from the unincorporated-county era. Rendon is unincorporated Tarrant County, so many automatic gate operators went in without a city inspection. We regularly correct footings that are too shallow, wiring that is undersized, and motors that were never rated for the gate’s weight.
Pricing for Gate Motor & Opener in Rendon, TX
Repair work on a gate motor in Rendon typically runs $280 to $680, and a full operator replacement lands between $1,400 and $3,200 installed. Linear arm rebuilds fall around $350 to $550 when the arm and board can be saved. Slide motor replacement with new rack where needed runs $1,800 to $3,200. Battery backup systems add $400 to $800 depending on the operator.
What moves the price is gate weight and length, whether existing posts can be reused, and the condition of the wiring run. We quote before we start, in writing, and the price we quote is the price you pay. Call (817) 286-7391 and Victor or a member of the team will walk you through it. Estimates are free.
We Also Serve Cities Near Rendon
Ironworks Gate Co. serves the full corridor around Rendon, including Kennedale to the west, Arlington to the north, and Everman and Forest Hill to the east. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews travel to your property from there. Call (817) 286-7391 and we will be there when we say.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Rendon
The Houston Black clay under Rendon swells with spring rain and shrinks hard during North Texas summer drought, which shifts gate posts out of alignment and changes the geometry the operator is working against. A gate that swings freely in wet April soil can drag, bind, or stop latching by August. The fix is usually re-plumbing the post and re-setting the operator travel, not replacing the motor. Call (817) 286-7391 and we can tell you over the phone whether it sounds like a soil shift or an operator problem.
Rendon is unincorporated, so you fall under Tarrant County rather than a city permit office. Generally, replacing an operator on an existing gate with no new electrical service does not require a county permit, but adding a new power run or a new gate structure can trigger electrical and right-of-way reviews. We can tell you what applies to your specific property before any work begins. Call us and we will check before we schedule.
Usually yes, but a 12-foot-wide driveway leaves limited run for the gate panel, so the operator and track will need careful placement to avoid blocking the drive while the gate is open. A rear-mounted slide track or a telescoping slide gate can work in tight widths. We measured and installed slide systems on narrow Rendon drives where a swing gate would have hit a fence line or a drainage swale. Call (817) 286-7391 and we will tell you honestly whether a slide works on your layout.
Without battery backup, the operator goes dead and the gate stays wherever it stopped, which can mean locked open or closed for days after an ice event. With battery backup installed, the gate will continue to cycle a limited number of times, usually enough to get vehicles in and out until power returns. Given how hard ice storms hit this corridor every two to three years, we recommend battery backup on any Rendon gate motor that protects the only vehicle access to a property. Call for a quote on adding backup to your existing operator.
Low battery voltage at dusk is the usual cause. Solar systems that charged fine all day drop below the operator’s minimum voltage as light fades, and the control board reads that as a fault and trips the photocell circuit. It can also happen when a panel is partially shaded by a cedar elm or a fence line that has grown over the collector. The fix is usually a battery replacement or a panel relocation, not a new motor. Call (817) 286-7391 and we can diagnose it on-site.
One Thing Rendon Gate Owners Should Know
Because Rendon sits in unincorporated Tarrant County, many automatic gate operators went in without a city inspection. That is not a knock on the homeowners who installed them; it is simply what happens when no permit office is looking. The result is a steady stream of repair calls for operators mounted on shallow footings, wired with undersized conductors, or sized without accounting for the weight of a heavy custom gate. Those installations fail repeatedly until the root cause is corrected.
We pulled up to a horse property off Rendon Road where the existing slide gate operator had been bolted to a post footing set in Houston Black clay without a proper concrete collar. After the spring rains, the post had shifted two inches and the rack and pinion was binding hard enough to burn out a 24V DC motor. We re-set the footing, installed a new FAAC 400 operator with battery backup, and added a loop detector so the gate would clear before the stock trailer bounced through.
That is the kind of job we do in Rendon every month. It is not glamorous work. It is the work that keeps a gate running for another decade instead of dying again next season.
Call Ironworks Gate Co. for Gate Motor & Opener in Rendon
If your gate motor is grinding, dead, or draining your patience, call (817) 286-7391. A live person answers, 24 hours a day, 7 days a week. We will give you a straight answer, a free estimate, and a price agreed before any work begins. Every job is backed by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing.
Ask about our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. We serve all of Rendon, from Rendon Road to Kelly Elliott Road and every acreage property in between.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon area property owners with gate motor and opener work since 1984.