Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Richland Hills
If your gate is sagging, dragging, or refusing to open in Richland Hills, the problem is rarely the gate itself. It’s what’s underneath it. Most gate repair in Richland Hills runs $185-$520, with hinge and post work on the lower end and operator replacement on the higher end. We answer the phone around the clock at (817) 286-7391, and our crews know the alleys and soil conditions that make this city’s gates fail in predictable, fixable ways.
Richland Hills is one of the smallest, most completely built-out cities in Tarrant County. That matters for gate work. The gate stock here dates almost entirely to the 1950s through 1970s, and it’s aging as a cohort. We don’t guess at what’s wrong. We’ve seen the same hinge posts heaving out of the same clay on the same streets for years, and that means we can diagnose faster and fix it the first time. Call (817) 286-7391 and a live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Richland Hills’s Preferred Gate Repair Company
We’ve been in the gate business for over 42 years, founded in 1984. That matters in a city like Richland Hills, where the housing stock is almost entirely mid-century and the gates are original to those homes. A gate hung in 1968 needs a different approach than one hung in 2018. Our technicians know the difference because they’ve worked on thousands of both.
Victor Salinas leads our team, and he’s built the company around a simple rule: do the job the way you’d do it for your own mother. That means background-checked, uniformed technicians on every call, a written price agreed before any work starts, and a 90-Day Done Right Promise on every job we complete. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
When you call us about a gate problem in Richland Hills, you’re not getting routed through a call center. A live person answers, asks where you are, and gets a technician scheduled. For most repair calls in Richland Hills, we’re on site the same day. And we carry parts for the brands most common in Tarrant County, so we’re not driving back to a warehouse while your gate sits open.
Our Gate Repair team treats every job, from a rotted hinge post to a failed control board, with the same care. That’s the Keystone Standard. The 400th job gets the same attention as the first.
Our Gate Repair Services in Richland Hills
Hinge & Post Repair
This is the bread and butter of gate work in Richland Hills. The city sits on North Texas expansive clay, the kind that swells with spring rain and shrinks hard during summer drought. Wooden hinge posts set in that soil rot at the ground line. The hinge screws lose their bite. The gate drops. In most Richland Hills homes, the fix is pulling the gate, setting a new post or a steel sleeve, and re-hanging it square. We do this multiple times a week on alleys and rear yards throughout the city. Expect to pay $220-$480 for a typical hinge post replacement, depending on post material and gate weight.
Gate Realignment
A gate that drags, binds, or won’t latch is usually out of square. In Richland Hills, the causes are consistent: clay soil heave, trash truck clearance on alley-facing gates, and decades of use on hardware that was never rebuilt. We re-rack the frame, adjust the hinges, and reset the latch so the gate closes like it did when it was hung. This is often combined with hinge or post work. A realignment alone typically runs $150-$300 in Richland Hills.
Automatic Gate Repair
Older automatic gates in Richland Hills often run on operators that predate modern safety standards. Control boards fail. Limit switches wear out. Capacitors blow in the summer heat. We service all major brands, including LiftMaster, FAAC, BFT, and Linear, and we’re trained and equipped on nine gate-automation brands total. When we repair an automatic gate, we also check for UL 325 entrapment protection. Many original operators from the 1980s and 1990s don’t have photo-eyes or edge sensors, and we can retrofit them so the gate is safe for your family and your neighbors.
Electric Gate Repair
Electric gates in Richland Hills deal with two things most of the country doesn’t: sustained 100°F-plus heat and clay-soil movement. Heat kills control boards and warps PVC-coated frames. Soil movement shifts the posts that hold the sensors and the operator mounts. We diagnose the electrical fault, replace what’s failed, and make sure the gate is properly aligned so the motor isn’t fighting the frame. Most electric gate repairs in Richland Hills run $225-$520.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
We train our technicians on nine gate-automation brands so the correct fix happens on the first visit, whatever is on your driveway. In Richland Hills, we most often see LiftMaster, FAAC, and BFT operators on older homes, plus Linear on some of the newer retrofits. We stock common control boards, sensors, and hardware locally, which means faster turnaround for Richland Hills customers. If you have an operator brand we don’t see every day, chances are we still service it. We’ve been doing this for over four decades, and there aren’t many surprises left.
Common Gate Repair Problems We See in Richland Hills Homes
- Rotted wooden hinge posts at the ground line. Clay soil holds moisture against the post in spring, then shrinks away in summer. The cycle rots the wood right where the hinge screws bite, and the gate starts to drag. On a rear alley off Dover Lane, we found a 1968 cedar swing gate with the hinge post rotted at the footing and the rack and pinion operator offline. We pulled the gate, poured a new post footing, replaced the pull-side hinge post, and remounted the gate with a LiftMaster capacitive safety edge. The owner kept the original gate board and avoided a full replacement.
- Alley gates battered by trash trucks and utility crews. The rear alley system woven through Richland Hills’s mid-century street grid means alley-facing gates take weekly abuse from truck clearance and delivery traffic. The original 1960s hinges and drop-rod latches were never designed for that. Pintle hinges bend, frames rack out of square, and drop rods stop catching.
- Gate operators without modern entrapment protection. Photo-eyes and edge sensors weren’t standard before 2000. Many original operators in Richland Hills lack UL 325 compliant safety devices. That’s a real safety issue, especially for homes with grandchildren or pets. We can retrofit the protection without replacing the whole operator.
- Swing gates that bind in summer but swing free in winter. This is the signature of North Texas expansive clay. The posts move with the moisture content of the soil, and the gate frame moves with the posts. The fix is resetting the posts and realigning the gate, not lubricating the hinges and hoping. Get in touch with Ironworks Gate Co. at (817) 286-7391 and we’ll get it done right.
Pricing for Gate Repair in Richland Hills, TX
Gate repair pricing in Richland Hills is straightforward, and it’s never a surprise. We quote the price before any work starts, and that price doesn’t change unless you ask us to do something different. Here’s what you can expect in this market:
- Hinge & post repair: $220-$480, depending on post material and gate weight.
- Gate realignment: $150-$300, often combined with hinge or post work.
- Electric gate repair: $225-$520, depending on the part that failed.
- Automatic gate operator repair: $250-$680, depending on whether we replace the control board, the motor, or the whole operator.
- $50 off any repair over $250, always available to Richland Hills homeowners.
If you’ve been handed a written estimate from another company, bring it to us. We’ll give you a free second opinion, and we’ll tell you honestly whether the work is needed. Senior and veteran discounts are always 5%. Call (817) 286-7391 for a free estimate on any gate repair in Richland Hills.
We Also Serve Cities Near Richland Hills
Our crews work across Richland Hills daily, and we also serve the surrounding Tarrant County communities. If you’re in Kennedale, Arlington, Everman, or Forest Hill, the same team answers the phone and the same 90-Day Done Right Promise applies. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and our technicians live and work throughout the metro area. We’re never far from your gate.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Richland Hills
Because the soil under Richland Hills expands when it’s wet and shrinks when it’s dry, and your gate posts sit right in that movement zone. The clay swells in spring, pushing the post up and out. It contracts in summer drought, leaving a gap around the footing. Over a year, the post heaves and tips. The fix is setting the post deeper or switching to a steel post, not just propping the gate up and calling it good. Call (817) 286-7391 and we’ll look at your specific post depth and soil condition.
Yes, sometimes. If your hinge posts are solid and the hinges themselves are straight, a new panel on existing hardware can work fine. But in Richland Hills, we usually find the post is doing the failing, not the panel. If the post is rotted at the ground line or the hinge screws have pulled loose, a new panel won’t solve the sag. We’ll tell you honestly which part needs replacing before quoting any work. Estimates are free.
Yes. UL 325 entrapment protection has been the federal standard for years, and any automatic gate operator without photo-eyes or an edge sensor is not safe. If your operator predates 2000, it likely lacks this protection. We can retrofit photo-eyes and safety edges onto most existing operators in Richland Hills without replacing the whole unit. Call (817) 286-7391 for a safety check and quote.
Your gate posts are moving with the clay soil. Summer drought shrinks the soil, the posts shift or tilt, and the frame goes out of square. The gate then binds against the latch post or drags on the ground. When rain returns and the soil swells, the posts shift back and the gate swings free again. The permanent fix is resetting and stabilizing the posts, not waiting out the season. Most post resets in Richland Hills run $220-$480. Call us at (817) 286-7391 and we’ll schedule a look.
Depends on the operator. If the motor is sound and the failure is a control board, a capacitor, or a limit switch, repair usually makes sense and runs $250-$520 in Richland Hills. If the operator lacks UL 325 entrapment protection and the board is obsolete, replacement is often the cheaper answer long-term. We’ll give you the honest comparison, with the repair price and the replacement price side by side, before you spend a dollar. Call (817) 286-7391 for a free estimate.
Call Ironworks Gate Co. for Gate Repair in Richland Hills
Your gate is part of your home’s first impression and its security. When it fails, you want it fixed by someone who’s seen that exact failure a hundred times and knows the correct repair. That’s us. We’ve been serving Richland Hills and the surrounding Tarrant County communities for more than four decades, and we plan to be here for forty more. Call (817) 286-7391 now. A live person answers, we’ll schedule a time that works for you, and you’ll get a written price before we turn a single bolt. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richland Hills and the Dallas-Fort Worth metro area since 1984.