Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Bedford, TX
If your driveway gate groans, drags, or refuses to open in Bedford, you need a company that understands Gate Access Control - Bedford and the specific way this city’s soil and housing stock treats gate hardware. Ironworks Gate Co. answers every call with a live person, 24 hours a day, and sends background-checked, uniformed technicians who know Bedford’s older subdivisions block by block. Call (817) 286-7391 and you’ll get an honest assessment over the phone, plus a clear path to getting your gate working again.
Bedford is a fully built-out, landlocked Mid-Cities suburb with no meaningful new residential construction. Virtually every gate job here is a repair or replacement, not a new-build install. The city’s housing stock was developed almost entirely between 1970 and 1995, which means original ornamental iron driveway gates and wooden swing-gate hardware from that era are simultaneously hitting the 30-to-50-year failure threshold across the city. That creates a dense, concentrated repair market that newer surrounding suburbs simply don’t have. We see it every week: gates that served faithfully for decades now need real attention, and we’re built for exactly that work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Bedford Homeowners Choose Ironworks Gate Co.
Frankly, Bedford homeowners have heard enough empty promises from one-truck outfits that disappear after a single season. We’re the gate specialist that stays. We’ve been in this trade for over 42 years, and our founder, Victor Salinas, still sets the tone: courteous, direct, no pressure. We show up when we say we will, we quote the full price before a single bolt is turned, and we stand behind every job with our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing, every time.
Over in the Harwood Road corridor and through the established streets around Meadow Park, homeowners call us for the same reason: they want the job done once. We’ve rebuilt gates off Harwood Road, reset sagging posts near Stonegate, and replaced automation on Shady Lane estates. We answer our own phone at (817) 286-7391, so you’ll never sit through a callback queue or leave a voicemail for an answering service.
Our technicians are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule, and Linear. That means the correct fix on the first visit, whatever is mounted on your driveway.
Gate Repair Services We Offer in Bedford
Gate Repair
From dragging gates to broken welds, we diagnose the true cause of the failure, not just the symptom. In Bedford, that often means the gate post has moved, not the hinges. We repair the whole assembly correctly, not just the piece that finally gave out.
Learn more about our Gate Repair in Bedford.
Gate Installation
When replacement is the right call, we build and hang gates that match the scale and style of your home and driveway. We measure, order, and schedule with care. Nothing is rushed, and the price is settled before we start.
Learn more about our Gate Installation in Bedford.
Gate Motor & Opener
We service automation from LiftMaster, FAAC, BFT, and Mighty Mule, among others. Whether your opener hums but won’t move or the remote stopped talking to the board, we trace it to the true source and replace only what’s needed.
Learn more about our Gate Motor & Opener in Bedford.
Gate Access Control
Keypads, intercoms, telephone entry, card readers. We install and repair access systems that keep your property private without making it inconvenient for you. This is measured, ordered, and scheduled work, with a free assessment and written price before anything is purchased.
Gate Parts & Welding
Broken hinge, cracked frame, bent upright: we fabricate and weld on-site when possible, restoring original strength rather than patching a problem with Bedford Gate Parts & Welding. For heavy ornamental iron gates in Bedford’s older neighborhoods, a proper weld beats a bolt-on bracket every time.
Neighborhoods We Serve in Bedford
Our Bedford routes cover the entire city, including the neighborhoods where gates are oldest and most in need of attention. We’re typically on site within one business day for repair calls across the area.
- Harwood Road corridor
- Meadow Park
- Stonegate
- Shady Lane estates
- Near the 76021, 76022, and 76095 ZIP codes
Why Bedford’s Climate & Housing Affect Gate Repair
Bedford sits on Tarrant County’s expansive black-clay soil, the kind that swells with winter and spring moisture, then contracts through the dry summer. Every cycle moves your gate posts a little more. It’s continuous, patient, and relentless. For wooden posts set in the 1970s and 80s with minimal or no concrete footings, the heave often lifts the entire post several inches out of plumb. The gate itself may look intact, but the post has moved so far that the entire post-and-hinge assembly must be reset before any hardware repair is meaningful. That’s not something a general handyman fixes with a wrench.
Add the February 2021 freeze and the periodic DFW ice storms, and you get welds that crack under stress and steel frames that warp in ways they were never designed for. Original ornamental iron gates from the late 1970s and 1980s are beautiful, but sustained sub-freezing temperatures exposed weaknesses in their welds and steel thickness. We repair those failures correctly, with attention to the original fabrication, not a cheap overlay.
Tight side-yard clearances on Bedford’s single-story, brick-clad ranch homes, built on modest 6,000-to-8,500-square-foot lots, mean swing gates often operate in constrained spaces. Original wood-post-and-picket privacy fences, many never replaced since the homes were built, are the primary driver of gate misalignment and post-rot calls. When the fence post rots, the gate post follows. We see it daily in Bedford’s established interior subdivisions, and we know how to fix the root cause, not just the gate hardware.
Pricing for Gate Repair in Bedford
- Gate alignment or hinge adjustment: $180-$340
- Post reset or replacement (wood or steel): $350-$850
- Weld repair on ornamental iron: $150-$450
- Opener or motor replacement (parts and labor): $600-$1,600, depending on brand and horsepower
- Full gate replacement (installed): $1,800-$6,000, depending on material, size, and automation
These are honest ranges for Bedford’s market. Your exact price is quoted and agreed before any work starts, so there are no surprises on the bill. We offer $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. Call (817) 286-7391 for a free estimate.
Service Area - Cities Near Bedford
We also help homeowners in Hurst, Haltom City, Fort Worth, and Grand Prairie with the same written 90-Day Done Right Promise and the same live-answer phone support.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well, also serving Hurst, TX. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bedford
Most gate repairs in Bedford run between $180 and $850, with full opener or gate replacement starting around $600 and $1,800 respectively. The exact quote is settled before we start, and it never changes after the fact. Call (817) 286-7391 for a free estimate specific to your gate.
For urgent repair calls in Bedford, we typically schedule within one business day, and we always try to route the nearest technician when a gate is stuck open or stuck shut. A live person answers at (817) 286-7391 around the clock, so you’ll know exactly when to expect us.
Bedford’s expansive black-clay soil heaves seasonally, and its original wooden gate posts, many set without concrete footings in the 1970s and 80s, shift several inches out of plumb over time. That movement stresses hinges, welds, and automation until something fails. We reset the post and repair the hardware as one job.
Yes. We’re trained and equipped on nine major brands, including LiftMaster, FAAC, BFT, and Mighty Mule. Whatever is on your driveway, the correct fix is made on the first visit rather than guessing and throwing parts at the problem.
Always. The price is quoted and agreed before any work begins, in writing. No surprises on the bill, and every completed job is covered by our 90-Day Done Right Promise. If it isn’t right, we come back and make it right, no hassle. Call (817) 286-7391 for honest pricing and a square deal.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford, Haltom City, TX, and the surrounding Mid-Cities with honest, durable gate work for over 42 years.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bedford Customers Say
"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson