Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Bedford
Gate access control in Bedford usually comes down to one of two jobs: repairing a keypad, card reader, or phone entry system on an existing gate, or adding access control to a gate that has never had it. Our crew works Bedford’s older neighborhoods every week, and we know what these 1970s through early 1990s gates do as they age. If your keypad stopped working or your remote will not open the gate, call (817) 286-7391 and a live person will answer, day or night. We dispatch a background-checked technician to Bedford, we quote the price before any work begins, and we stand behind the job with a written 90-Day Done Right Promise.
If you live anywhere in Bedford, from the Shady Brook area east of the airport to the streets off Harwood Road, we will be there when we say. Most access control repairs in Bedford are done in a single visit.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Access Control Company
Bedford homeowners call us because the gate they are standing in front of was built when their house was built, and it has been working, more or less, for thirty or forty years. That gate needs a technician who understands how the original post was set, how the clay soil under it has moved, and what the access control system has to do to keep working on a gate that is no longer perfectly square. Our crews have been doing exactly this work for over 42 years, and we carry parts for nine major automation brands so the correct fix happens on the first trip.
Victor Salinas, who leads Ironworks Gate Co., built this company on a simple rule: every job gets the same care whether it is the first gate we touch or the four hundredth. Our technicians arrive in uniform, work the way they would in their own mother’s driveway, and leave the gate closing like it should. Bedford customers keep our number because we answer the phone at 3 a.m. the same way we answer it at noon. No voicemail tree. No answering service. A person.
We also know Bedford’s specific layout: tight side yards on 6,000 to 8,500 square foot lots, shared driveway rights of way in older subdivisions, and swing gates that barely clear the fence line. That local knowledge matters when you are deciding whether a keypad can be added to what you already have, or whether the post itself has to be reset first.
Our Gate Access Control Services in Bedford
Our Gate Access Control team handles the full range of entry systems for driveway and estate gates. In Bedford, the most common requests are keypad entry, loop detectors, and phone entry, but we service and install all of the following:
Keypad Entry
A keypad mounted on a pedestal or gate post lets family members, delivery drivers, and trusted visitors open the gate with a code. In Bedford, the main problem is not the keypad itself. It is the post. When clay soil heave moves a hinge post out of plumb, the keypad and latch lose alignment, and the gate will not release even with the correct code. We check post alignment before we ever condemn a keypad. A typical keypad repair or replacement in Bedford runs $180-$390, and a new keypad installation on an existing operator runs $350-$650.
Loop Detectors
A loop detector buried in the driveway senses your vehicle and opens the gate automatically, without pressing anything. Older Bedford driveways often have failing loop wires from decades of clay soil movement cracking the saw-cut sealant. We install and repair exit loops so the gate opens for cars leaving but not for neighborhood dogs or wind gusts. Loop detector repair in Bedford typically runs $250-$500 depending on the driveway surface.
Phone Entry
Phone entry systems let a visitor call a programmed number from the gate, and you open it from your phone. We install these on Bedford homes where the driveway is shared, where pedestrians need access while cars are out, or where the homeowner wants a record of who came and went. Phone entry systems in Bedford generally run $600-$1,100 installed, and we wire them to work with your existing opener or a new one.
Card Reader
Card readers work well for Bedford homes with regular caregivers, pool service, or landscaping crews. A card or fob is faster than a code, and you can deactivate a lost card without changing everyone’s code. We install standalone card readers and card readers tied into phone entry and video intercom systems. A card reader added to an existing gate setup in Bedford typically runs $400-$800.
We also service and install remote controls, video intercoms, and smart access systems. If your Bedford gate has an opener that predates your current phone, give us a call at (817) 286-7391 and we will tell you honestly what can be saved and what should be replaced.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We are trained and equipped on nine gate automation brands, and in Bedford we most often see FAAC, BFT, Linear, and Viking on the older estate gates, and LiftMaster and Ghost Controls on newer installs. Because we stock common parts for these brands, most Bedford repairs are completed the same day we arrive. If your existing opener is a brand we service, we can usually add a keypad, card reader, or phone entry system to it without replacing the operator. And if the operator has failed, we can match the new one to your existing access control rather than replacing everything.
Common Gate Access Control Problems We See in Bedford Homes
These are the access control failures we see most often in Bedford, and they are almost always tied to the age of the gate and the soil under it:
- Post heave and keypad misalignment. Bedford’s expansive clay soil swells and shrinks with every wet and dry season, pushing original 1970s and 1980s gate posts out of plumb. The keypad still works, but the gate will not release because the latch and strike no longer line up.
- Water intrusion after heavy rain. Tarrant County thunderstorms and the runoff they bring find their way into older keypad housings and underground loop wiring. Intermittent keypad failure after rain is almost always a seal or splice issue, not a bad keypad.
- Swing gate arc too tight for the side yard. On Bedford’s narrower lots, the original swing gate barely clears the fence. Adding a phone entry intercom or video unit adds weight to the frame, and a sagging gate will drag or bind until the hinge post is corrected.
- Freeze damage from the February 2021 ice storm. That storm cracked welds and warped steel frames on ornamental iron gates across Bedford. A cracked frame worsens sag, and sag makes every access control component work harder and fail sooner.
Pricing for Gate Access Control in Bedford, TX
Gate access control pricing in Bedford depends on what is already in the ground and what shape the gate itself is in. A standalone keypad on a functioning opener runs $350-$650 installed. Adding a card reader runs $400-$800. A complete phone entry system with a new operator typically runs $1,200-$2,400 on a single swing gate. If we find a heaving post or a cracked frame, we will show you the problem, quote the fix separately, and never start work you have not approved. No surprises on the bill, ever. We also offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (817) 286-7391 for a free estimate – the price is quoted and agreed before a single bolt is turned.
We Also Serve Cities Near Bedford
Our crews serve Bedford and the surrounding Mid-Cities communities, including Hurst, Haltom City, Fort Worth, and Grand Prairie. If you live just outside Bedford proper, we still cover your gate. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Bedford locally, so we can usually reach you faster than a company coming in from outside the metro.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Bedford
In Bedford, intermittent keypad failure after rain is usually a water intrusion problem at the keypad housing seal or an underground splice, not a failing keypad. Tarrant County’s heavy thunderstorms find every cracked gasket and every old wire nut within minutes. We open the keypad, inspect the seal and wire splices, and repair the water entry point rather than just replacing the keypad and watching it fail again next storm. Call (817) 286-7391 and we will trace the problem to its source.
Yes, in most cases we can add a card reader to a 1980s swing gate without replacing the gate itself. The deciding factor is the hinge post. If the post has heaved out of plumb, the gate will never align with the latch consistently, and any access control we add will be unreliable. We reset the post first when needed, then add the card reader. But the gate steel is rarely the problem – it is almost always the footing underneath it.
If your Bedford side yard is too narrow for a proper swing arc, the access control answer is a slide gate. The gate runs parallel to the fence line instead of swinging into the driveway, which buys you usable space that a swing gate wastes. We install keypads, card readers, and phone entry on slide gates all over Bedford’s older subdivisions. The access control hardware is the same; the gate’s travel direction is what changes.
While we repair a Bedford gate operator, we set the gate to manual operation and make sure the pedestrian path is clear before we leave the site. If the work will take more than a day, we cap exposed wiring, secure the gate so it will not drift, and coordinate with you on how the gate should sit overnight. We do not leave a Bedford driveway blocked or a pedestrian gate swinging loose.
You can add a video intercom to a Bedford gate with freeze-cracked welds, but only after the frame is repaired. Adding weight to a cracked frame worsens sag, and a video intercom mounted on a sagging gate will misalign with the latch and give you a bad picture angle. We weld the crack, verify the gate hangs square, and then install the intercom so it works from day one. Call (817) 286-7391 and we will tell you what the frame needs before we quote the intercom.
Contact Ironworks Gate Co. for Gate Access Control in Bedford
If your Bedford gate will not open, your keypad has quit, or you want to add phone entry or a card reader to what you already have, call (817) 286-7391. A live person answers, 24 hours a day, 7 days a week. We will schedule a tech for Bedford, give you an upfront price before any work starts, and back the whole job with our written 90-Day Done Right Promise. Done right – and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., leading gate access control work across Bedford and the Mid-Cities since 1984.