Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford, TX is a retrofit job nearly every time. We’re not pouring footings on a fresh lot out in Haslet or Northlake – we’re resetting 1970s posts that black-clay soil has heaved out of plumb, then hanging a gate and operator that will outlast the next three North Texas freeze cycles. If you live off Harwood Road or in the older subdivisions around Shady Brook and Meadow Creek, call (817) 286-7391 and a live person answers, day or night. We send a background-checked, uniformed technician to Bedford every weekday, same-day when the situation calls for it, and most jobs are finished in one visit.
That matters because a dragging gate on a Bedford ranch house is rarely just a hinge. The post has moved. The conduit was never run. The builder-grade opener from 2008 burned out its control board two winters ago. We fix the whole assembly, not the symptom.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Installation Company
We’ve been in this trade for over 42 years, founded in 1984, and Bedford’s particular housing stock keeps us busy for a simple reason: virtually every home here was built between 1970 and 1995, which means every original gate, post, and opener in this city is failing on roughly the same schedule. Our crews run Bedford routes weekly, so we know the difference between a Meadow Creek double driveway gate with fussy hinge geometry and a newer Bedford Meadows security gate that just needs a control board. That familiarity means we arrive with the right parts and a plan, not a clipboard and a guess.
Bedford homeowners tell us what they tell any contractor who has earned their trust: do it once, do it right, and put it in writing. That’s the 90-Day Done Right Promise, and it’s printed on every job, no paperwork, no arguing. If it isn’t right within 90 days, we come back and make it right. Every job, every time.
We’re trained and equipped on nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – which matters in Bedford because we see all of them. A homeowner should not have to explain their opener to the technician. We already know it. And a live person answers our phone 24 hours a day, 7 days a week at (817) 286-7391. No voicemail trees, no Monday morning callback.
Key Takeaways
- Gate installation in Bedford almost always starts with a post reset, not a fresh hole.
- Most Bedford homes were built before conduit for gate automation was standard – adding an opener usually means trenching.
- Free estimates, upfront pricing settled before any work begins, and a written 90-Day Done Right Promise.
- Live person answers (817) 286-7391 around the clock.
Our Gate Installation Services in Bedford
Driveway Gate Installation
A driveway gate in Bedford is doing double duty: security for a home on a 6,000 to 8,500 square foot lot, and a visual anchor for a single-story brick ranch that has looked the same since 1983. We install steel-framed, ornamental iron, and wood-insert driveway gates matched to the home’s era, with an eye toward clearances that older Bedford lots rarely offer. The number one thing we check before any driveway gate goes in is whether the hinge posts are still square. In Bedford, after 40 years of clay soil movement, they usually aren’t. We reset posts before we hang anything, because a square post is the whole job.
Pedestrian Gate Installation
Side-yard pedestrian gates in Bedford neighborhoods like Meadow Creek and the streets east of Bedford Road tend to be wood-framed, built with the original fence, and hung on posts that were never meant to hold a heavy gate long-term. When we replace one, we dig to code depth, pour a real footing, and frame the gate to hold its own weight without sagging. A pedestrian gate should close square and latch without lifting on the handle. That’s the standard, and if it doesn’t do that on day 90, we’re back under the 90-Day Done Right Promise.
Sliding Gate Installation
Not every Bedford lot has room for a swinging gate. On tighter side yards, where a solid iron swing gate would clip the fence or drag the driveway during a drought-swell cycle, a sliding gate is often the better answer. Sliding gate installation in Bedford means a steel track bed, a cantilever or V-rail system, and a motor rated for the gate’s actual weight. We also run the conduit and power properly, because a sliding gate that loses power on a DFW summer afternoon isn’t a convenience issue – it’s a homeowner stuck in their own driveway.
Swing Gate Installation
Dual swing gates on Bedford’s older ranch homes are the job we’ve done most over 42 years. The geometry has to be right: both leaves square to the posts, hinges sized for the full leaf weight, and an operator with enough torque for a solid ornamental iron panel, not a hollow aluminum gate that barely weighs 200 pounds. We set the posts, hang the leaves, mount the operator, and then set the safety photocells and edge sensors to stopping distance on the tight side yards Bedford homes are known for. The K.E.Y.S. standard applies: Krafted right, Every time, Your home first, Standing behind it.
Security Gate Installation
A security gate on a Bedford property is only as good as the post it hangs from and the operator that moves it. We install security gates with reinforced steel frames, keypad entry, vehicle exit loops, and automation that actually holds up to North Texas heat and ice. Every security gate we install is quoted and agreed before any bolt is turned, so the invoice matches the quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
Bedford driveways host a mix of operator brands, and we’ve been trained on the ones homeowners actually have: Mighty Mule, LiftMaster, FAAC, BFT, and five more. That means when a Bedford homeowner calls about a Viking swing operator that stopped mid-cycle, we don’t have to research it on the tailgate. We know the board, the limits, and the sensor wiring. We stock common parts for the brands Bedford sees most, which shortens the repair window and keeps most installations to a single visit.
Common Gate Installation Problems We See in Bedford Homes
- Heaved posts out of plumb. Tarrant County black-clay expands and contracts with seasonal moisture. Posts set in the 70s and 80s – often with only 18 to 24 inches of footing and no concrete collar – have moved enough to tilt an entire gate assembly. A new gate hung on a tilted post will drag and bind within a year.
- No conduit for automation. Original manual gates from the 1970s and 1980s were never run with spare conduit. Adding an opener means trenching under brick walkways or driveways. We trench, sleeve, and repair the path so the new power run is code-compliant.
- Builder-grade operators on heavyweight gates. Homes built in Bedford since around 2005 often came with a low-cost operator through a big-box installer. Those boards can’t handle a solid ornamental iron gate for more than a couple of seasons. We replace them with a correctly sized operator and wire in proper entrapment protection.
- Wood post rot at the soil line. Original wood hinge posts in Bedford’s 1970s-era additions have spent four decades in soil that stays damp through winter and bakes dry in July. The rot happens right at grade. We pull the post, set a new one in concrete to 32 inches, and only then mount the new gate.
Pricing for Gate Installation in Bedford, TX
A pedestrian gate replacement in Bedford typically runs $800 to $2,200, including the post reset. A single driveway swing gate with a new operator usually lands between $3,200 and $6,800 depending on the gate’s width, material, and whether we’re trenching conduit under a walkway. A sliding driveway gate, which needs more track and a heavier operator, generally runs $5,500 to $9,500 on a Bedford ranch lot. A full security gate package with keypad, exit loop, and phone or intercom entry starts around $7,000 and goes up from there. Bedford’s older lots mean post resets and conduit trenching are built into most of our quotes. We give you the number before any work starts, and that number is what you pay. Call (817) 286-7391 for a free estimate – a live person answers.
We Also Serve Cities Near Bedford
Our Gate Installation team runs routes throughout the Mid-Cities and western Tarrant County. Along with Gate Installation in Bedford, we serve Hurst, Haltom City, Fort Worth, and Grand Prairie with the same 90-Day Done Right Promise and the same live-answer phone line.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
The hinges are fine. The post moved. Bedford’s black-clay soil swells when it’s wet and shrinks when it’s dry, and over one winter it can lift a post an inch or more. That throws the gate leaf off square, so it scrapes and binds. The fix is to pull the post, dig to proper depth, pour a concrete footing, reset the post, and then re-hang the gate. Hinge work alone won’t hold in Bedford. Call (817) 286-7391 and we’ll confirm it with a level in about five minutes – estimates are free.
Yes. Almost every Bedford home from that era lacks the conduit run. We trench a new ¾-inch PVC run for 120V power and, where needed, a shielded low-voltage loop detector lead, then repair the path so you’d never know we trenched it. The trenching adds to the job, but it means the operator gets clean, code-compliant power instead of an extension cord buried in the flower bed. Call (817) 286-7391 and we’ll work up the full quote, including the electrical run.
Yes, and this isn’t a paperwork formality. Any automated vehicular gate must have entrapment protection – typically photo eyes, contact edge sensors, or both – and that protection has to be tested. We set the photocell alignment and edge-sensor sensitivity on every automated gate in Bedford, and we set them for the tight clearances found on these older ranch lots. A person or pet should never be in a position where the gate can’t tell they’re there.
Setting a new gate on the original posts. Bedford’s original wood hinge posts were often set with little to no concrete footing, and after forty years of clay-soil heave, they’re out of plumb by several inches even when they look straight to the eye. We see it on nearly every job in Shady Brook and Meadow Creek. The gate panel may look fine in the shop, but it will bind, drag, and kill the new operator within a season. The correct sequence is post reset first, then gate. Call (817) 286-7391 and we’ll show you exactly what we’re measuring before we quote anything.
You can, and on a gate with good southern exposure in Bedford, a solar-charged opener can work. But we tell homeowners straight: a solar kit on a solid ornamental iron double gate, especially one shaded by a mature pecan or oak, will let you down in a North Texas ice event. The February 2021 freeze is a good example – panels ice over, batteries are already at reduced capacity from the cold, and the gate won’t move exactly when you need it. For a gate you expect to work every time, we recommend a 120V run. If solar is the only option, we’ll size the panel and battery to the gate’s actual weight and be honest about the limits. Call (817) 286-7391 for a straight answer and a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford since 1984.