Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Fort Worth, TX
If your driveway gate is groaning, sagging, or refusing to open at all, you already know the feeling: you’re stuck either inside or outside, and the gate is now a problem instead of a convenience. Around Fort Worth, we see this play out most often in the older neighborhoods east of downtown, where a gate that worked fine last year suddenly drags on the driveway after a wet spring. Ironworks Gate Co. fixes gates throughout Fort Worth, usually in a single visit, and you’ll speak to a live person whenever you call (817) 286-7391. We’re background-checked, uniformed, and we quote the price before any work begins.
Key Takeaways:
- Fort Worth’s expansive clay soil causes gate posts to lean and heave more than in neighboring cities, which means most of our local repair quotes include post re-setting.
- We service nine major gate-automation brands, including LiftMaster and FAAC, so the right part goes on the first time.
- Every repair is covered by a written 90-Day Done Right Promise: if it’s not right, we come back and make it right. No paperwork, no arguing.
- Standing offers for Fort Worth homeowners: $50 off any repair over $250, a free second opinion on any written estimate, and $89 seasonal tune-ups.
What Our Fort Worth Customers Ask on the Phone
The two questions we hear most often: “Can you come today?” and “Will this be the last time I pay for this?” The first answer is usually yes, since we dispatch crews from our Dallas-Fort Worth office to Fort Worth addresses daily. The second answer is why the home page exists: we don’t patch a symptom and drive off. Victor Salinas built this company on the idea that a gate repair should hold up through a Fort Worth summer and a North Texas freeze, and we put that in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Fort Worth Homeowners Choose Ironworks Gate Co.
We answer the phone. That’s the first thing people mention. No voicemail tree, no answering service, just a person at (817) 286-7391, 24 hours a day. When a gate motor fails at 10:30 p.m. and your car is trapped inside the driveway, you don’t want a callback queue.
The second thing we hear: the technician showed up when promised, wore a uniform, and cleaned up after the job. We hold to the K.E.Y.S. standard on every visit, whether we’re re-welding a steel frame in the Near Southside or replacing a control board in Polytechnic Heights. The 400th job gets the same care as the first.
And honestly, in Fort Worth, experience with our dirt matters. We’ve re-set enough gate posts in Ryan Place and Mistletoe Heights to know exactly what the clay does to a footing. That means our quotes are realistic. A contractor from outside North Texas often prices the job as if the post were set in stable loam. We don’t.
Victor Salinas, who leads Ironworks Gate Co., insists on a written 90-Day Done Right Promise for every completed job. If something isn’t right after we leave, call us. We come back. That’s the Keystone Standard, and it’s why homeowners in Fort Worth keep our number.
Gate Repair Services We Offer in Fort Worth
Gate Repair
Sagging hinges, cracked welds, bent frames, gates that scrape the driveway. We repair swing gates and slide gates on any residential or light-commercial property in the 76101, 76102, and 76103 ZIP codes. Most repairs are completed in one visit with upfront pricing agreed before we touch a bolt.
Learn more about our Gate Repair in Fort Worth.
Gate Installation
We don’t just hang a gate; we set posts to the depth Fort Worth clay demands, weld or bolt the frame square, and hang it so it closes true on the first swing. We install steel, ornamental iron, pipe-rail, and wood gates to match the house.
Learn more about our Gate Installation in Fort Worth.
Gate Motor & Opener
We carry service parts and boards for LiftMaster, FAAC, BFT, and Linear, plus five other major opener brands. If a gearbox froze in the February ice or a control board cooked in the August heat, we diagnose and fix it on the spot in most cases.
Learn more about our Gate Motor & Opener in Fort Worth.
Gate Access Control
Keypads, intercoms, vehicle loop detectors, remote receivers, and phone-based entry. We configure the system so the right people get in and everyone else stays out, without making you reprogram it every other week.
Learn more about our Gate Access Control service in Fort Worth.
Gate Parts & Welding
Sometimes the fix is a new hinge barrel or a welded corner gusset, not a whole new gate. Our welders fabricate and repair on-site, matching the existing metal and finish closely enough that the repair doesn’t announce itself.
Learn more about our Gate Parts & Welding work in Fort Worth.
Neighborhoods We Serve in Fort Worth
We work across Fort Worth, from the bungalow streets of the Near Southside to the mid-century ranch homes along the East Lancaster corridor. Our crews are out in these neighborhoods every week, and our typical response is same-day when you call before mid-afternoon.
- Near Southside
- Polytechnic Heights
- Ryan Place
- Mistletoe Heights
- Downtown Fort Worth (76101-76103)
Why Fort Worth’s Climate & Housing Affect Gate Repair
Fort Worth sits on the Blackland Prairie, and that fact drives more gate work than any other single thing we see. The clay soil here swells when it rains and contracts in the summer heat, and it does this in a rhythm that never lets up. A gate post set only 24 or 30 inches deep, as so many were in the 1950s and 1960s, will visibly lean within a season or two. Around the older east-side streets and in the Near Southside, we regularly find posts that have pulled three inches out of the ground or cracked their concrete collars.
Then there’s the gate itself. Fort Worth’s Stockyards heritage left a mark on residential architecture: even modest ranch homes often have heavy pipe-rail or ornamental iron gates across the driveway. That’s more weight on the hinges and more leverage on a leaning post, and it means a sagging gate here isn’t a simple hinge swap. It’s a post re-set, a frame straighten, and often a new weld, all done in North Texas wind and heat. Winter Storm Uri in February 2021 added another layer: we still see freeze-cracked actuator housings and motor gearboxes with ice damage, especially on gates that went unserviced through that week.
Summer heat does its own work. Sustained 100-degree days warp wood frames, degrade rubber seals on automatic operators, and bake the grease out of hinge bearings. A gate that opens fine in October may drag in July. Local crews know this. Out-of-town contractors sometimes don’t, and their quotes miss the post re-set that the job actually needs.
Pricing for Gate Repair in Fort Worth
Honest numbers help, so here are typical ranges we quote in the 76101-76103 corridor. Actual price depends on the gate, the post condition, and the opener brand, but these reflect what we see day to day:
- Hinge or weld repair on a swing gate: $180-$340, typically one visit.
- Post re-set in expanding clay (dig, pour proper pier, re-mount): $350-$650.
- Opener service, new board or gearbox: $220-$520, brand-dependent.
- Full-service tune-up, including limit switches, safety edges, and chain/belt tension: $89 seasonal rate.
Every quote is agreed in writing before we begin. We don’t surprise you at the end. If you have a written estimate from another company, bring it to us for a free second opinion. And if your repair tops $250, ask for the $50 discount. Senior and veteran homeowners receive 5% off, always.
Service Area - Cities Near Fort Worth
Our Fort Worth crews also serve neighboring communities east and northeast of the city. If you live in Haltom City, Hurst, Kennedale, or Bedford, we cover those same clay-soil issues and automate the same opener brands.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fort Worth
Most repairs in the 76101-76103 ZIP codes run between $180 and $650, depending on whether the post needs re-setting or the opener needs a new board or gearbox. A simple hinge and weld fix is typically $180-$340, while re-setting a leaning post in clay runs $350-$650. Call (817) 286-7391 for a specific quote, free of charge.
Usually, yes. If you call before mid-afternoon, our Fort Worth-dispatch crew can often be at your gate the same day for common repairs like hinge failures, broken welds, and opener board replacements. For jobs that need concrete pours or custom fabrication, we’ll schedule the soonest available morning and give you a written price first.
Fort Worth’s Blackland Prairie clay expands when wet and contracts when dry, and most mid-century gate posts were set too shallow for that movement. A post at 24-30 inches will heave and lean within a season or two; we set replacements 36-42 inches deep with proper concrete and sometimes add a through-bolt connection to resist the wind load. This local fix is one of the most common items on our Fort Worth estimates.
Yes. We’re trained on LiftMaster, FAAC, BFT, and Linear, along with five other major brands, so the diagnosis and the part are both right the first time. If you have an older DoorKing or Viking opener from the 1990s on an east-side ranch home, we can usually service that too.
We will tell you straight. Many Fort Worth gates that look done-for are actually worth saving with a post re-set, new hinges, and a couple of welded gussets, especially the heavier ornamental iron and pipe-rail styles common in this area. If the frame is too far gone or the cost of repair exceeds 60% of replacement, we’ll say so and quote both options without pressure. Call (817) 286-7391 and we’ll give you an honest read.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Fort Worth, TX with gate repair, installation, and automation services.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"The repair is holding. He was quite a bit later than the window I was given and the office did not call me about it, I had to call them. The work itself was done well once he arrived."
- Ruben Morales"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson