Gate Access Control in Hurst - Written Price, Install Date Set

Gate Access Control in Hurst, TX: What It Costs and Who to Call

Gate access control in Hurst, TX typically runs $450-$1,800 for a complete keypad, phone entry, or card reader installation, while a video intercom with smart access runs $1,500-$4,200 depending on the gate’s age and the condition of its posts. Most Hurst homes with ranch-style driveway gates built between 1955 and 1985 need a full post-footing assessment before any new access control is installed, because the Blackland Prairie clay under this city has been heaving posts out of plumb for decades. We are Ironworks Gate Co., and we’ve spent 42 years learning exactly how Hurst gates fail so we can fix the root cause, not just swap parts. Call (817) 286-7391 for a free estimate on any access control repair or installation in Hurst.

Call (817) 286-7391

Key takeaways:

• Gate access control repairs in Hurst start at $125 for a service call and run $450-$1,800 for a full keypad or phone entry replacement.
• The single biggest cause of access control failure in Hurst is clay-soil post movement, not the electronics themselves.
• We service LiftMaster, FAAC, BFT, Mighty Mule, and five other gate-automation brands, and we carry parts for same-visit repairs across Hurst.
• Every job is backed in writing by our 90-Day Done Right Promise. The price is quoted and agreed before any work starts. Always.

Fast, Reliable Gate Access Control Across Hurst

If you live in the 76053 or 76054 ZIP and your driveway gate’s keypad has stopped talking to the operator, or your phone entry system works in the morning but not in the afternoon, the problem is rarely the board. In Hurst the problem is almost always the post. Blackland Prairie Vertisol clay under the Mid-Cities has been expanding and contracting for the last 40 to 65 years, and it has tilted thousands of ornamental iron and cedar fence gate posts one to three inches out of plumb. When the latch binds against the post, the operator stalls before the lock can disengage, and the keypad looks dead when it’s actually fine. We work on Gate Access Control systems every week across Hurst, and we start every job by checking the post before we touch a module. That’s what keeps the repair from failing again in six months. Call (817) 286-7391 and describe the symptom; we’ll give you an honest take on what’s actually wrong.

Why Ironworks Gate Co. Is Hurst’s Preferred Gate Access Control Company

We’re the gate specialist that Hurst homeowners call when they’re tired of handymen replacing parts that don’t fix the gate. Our founder Victor Salinas built this company in 1984 on a blacksmith’s respect for the metal and an electrician’s respect for the motor, and our technicians still talk to customers the way a trusted neighbor would: plainly, with no upsell and no jargon. We show up in uniform, background-checked, and we treat your driveway the way we would treat our own mother’s.

Hurst homeowners have told us the same thing for years: the generalist they called before us replaced the keypad, charged them for it, and the gate still didn’t open the next morning. Our response time to Hurst is usually same-day for access control failures because we know a keypad that won’t release the gate is a security problem and a family frustration. Every job we do in Hurst is protected by the 90-Day Done Right Promise in writing, and we settle the price before a single bolt is turned. No surprises on the bill, ever.

Our Gate Access Control Services in Hurst

Hurst’s housing stock is almost entirely ranch-style and brick traditional homes built from the mid-1950s through the mid-1980s. Those original ornamental iron swing gates and cedar privacy fence gates are reaching end-of-life at the same time across whole subdivisions. The access control attached to them, keypads, phone entry units, card readers, has been patched and re-patched over the years. We repair and install all of it, but we start with the structure underneath.

Keypad Entry in Hurst

Most keypad entry systems in Hurst are wired or wireless units mounted on a gooseneck post beside the driveway. When the post itself has crept out of plumb on Vertisol clay, the keypad still sends its signal, but the gate latch binds and the operator stalls before the lock can disengage. We diagnose the post first, then the keypad. A new keypad entry system in Hurst runs $450-$900 installed, depending on whether you need a new post set or a simple unit swap. We reset footings, square posts, and reinstall the keypad so the gate opens smoothly every time, not just on cool mornings.

Remote Control

Remote control systems are straightforward until the receiver is mounted on a post that’s moved and the antenna range drops because the gate no longer swings true. In Hurst’s established neighborhoods near Precinct Line Road and west into the 76053 ZIP, we frequently replace older remote receivers with newer rolling-code units that pair with your existing operator, LiftMaster, FAAC, BFT, or Mighty Mule. A remote receiver replacement typically runs $250-$500 in Hurst, and we carry remotes for all nine brands we service in our trucks.

Phone Entry Systems in Hurst

Phone entry is popular in Hurst because many homeowners have long driveways and want to buzz visitors through without walking to the road. The system dials your cell phone or landline, you press a key, and the gate opens. When it fails, it’s often because the gate’s post has shifted and the operator is stalling before the lock disengages, so the phone entry appears dead. We install and repair phone entry systems on Hurst gates for $600-$1,200, including the cellular relay if needed. In areas near Pipeline Road where cell signal can be weak, we install units with external antenna connections so call quality stays clear.

Card Reader Access in Hurst

Card readers are less common on single-family Hurst driveways, but we install them on estate properties and a few small private lanes in the 76054 and 76053 ZIPs where multiple households share a gate. A proximity card reader with a keypad override runs $800-$1,500 installed. We wire it to the operator with the safety photocell loop intact, and we program the cards on site so you can use the gate the same day.

Video Intercom and Smart Access in Hurst

For Hurst homeowners who want to see who’s at the gate before opening it, we install video intercom systems that run over Wi-Fi or a hardwired Cat6 line, with an app on your phone. On older ornamental iron gates, the challenge is mounting the camera so the post movement doesn’t knock it out of aim. We use adjustable mounts and weather-sealed enclosures. Video intercom with smart access in Hurst typically runs $1,500-$4,200, depending on whether we’re adding it to an existing opener or replacing the whole system. Call (817) 286-7391 and we’ll walk the property with you and write a fixed quote.

Trusted Brands We Service in Hurst

Our technicians are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because the correct fix depends on the brand and board revision, not just the symptom. We carry LiftMaster, FAAC, BFT, and Mighty Mule parts in our Hurst-bound trucks, so most access control repairs are completed in one visit. If your gate was installed 25 years ago and the brand sticker is gone, we can identify it from the motor and board in minutes. Done right, and backed in writing.

Common Gate Access Control Problems We See in Hurst Homes

Here’s what we find most often when Hurst homeowners call about a gate that won’t open or a keypad that seems dead:

• Post movement from clay soil. The gate post has crept one to three inches out of plumb over decades of wet-dry cycles, the latch binds, and the operator stalls before the keypad or phone entry lock can disengage. Any electronic fix is temporary until the post footing is reset deeper and belled below the active clay layer.
• Solar panels that can’t keep up. On rural acreage entrances around Hurst where there’s no power at the road, a solar gate opener loses charge because the panel is mounted too low or shaded by a mesquite or pecan canopy, and the battery never recovers enough to swing a heavy 16-foot farm gate. We remount panels higher and clear the shade path, or add a second panel when the load demands it.
• Slide gates jumping teeth. A slide gate with rack and pinion binds or jumps teeth when the concrete runway has heaved or cracked from repeated freeze-thaw and drought cycles, tripping the loop detector or safety photocell and leaving the gate stuck halfway. We repair the runway and re-set the rack so the gate travels straight.
• Old operators paired with new access control. A homeowner installs a smart access system or new video intercom, but the 1980s-era operator underneath can’t respond to the new signal timing. We match the access control protocol to the operator’s board version, or replace the operator with a current unit that’s compatible with the keypad, phone entry, and intercom together.

Pricing for Gate Access Control in Hurst, TX

We Also Serve Cities Near Hurst

Our crews serve all of Hurst and the surrounding Mid-Cities communities. If you’re in Bedford, Haltom City, Fort Worth, or Grand Prairie and need a gate access control specialist who will fix the post before the module, we’ll come to you. The same team, the same written 90-Day Done Right Promise, the same upfront pricing. Gate Access Control in Hurst is our home turf, and we treat every neighbor’s driveway like it’s our own.

FAQs - Gate Access Control in Hurst

Call Ironworks Gate Co. for Gate Access Control in Hurst

If your Hurst gate won’t open, your keypad is dead, or your phone entry won’t release the latch, don’t keep replacing electronics without fixing the post underneath. Call (817) 286-7391 and a live person will answer, 24 hours a day, 7 days a week. No voicemail trees, no callback queues. We’ll schedule a same-day visit for access control failures in Hurst, give you a written price before any work begins, and back every job with the 90-Day Done Right Promise in writing. Victor Salinas built this company in 1984 to do gate work right the first time and stand behind it. That’s the standard we bring to every Hurst driveway. Call (817) 286-7391 for a free estimate today.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst since 1984.