Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Haltom City
A gate motor and opener in Haltom City typically costs between $450 and $1,400 installed, depending on the gate type and condition. Most jobs on the city’s older chain-link swing gates start lower, while heavier slide gates and solar systems run higher. We’re Ironworks Gate Co., and our crews work Haltom City’s 76117 zip code every week, usually reaching your driveway within a few hours of your call. Call us at (817) 286-7391 and a live person answers, day or night.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Motor & Opener Company
We’ve spent over four decades becoming the company Haltom City homeowners call when a gate won’t open and a car is stuck in the driveway. The reason is simple: we know what the clay does to these gates. A technician who has never worked Tarrant County soil will replace a motor and leave, and six months later the gate drags again because the post was never right. We don’t do that. Every job starts with the post, the frame, the hinges, and then the motor.
Victor Salinas, our owner, built Ironworks Gate Co. on a principle that fits Haltom City’s aging housing stock perfectly: fix the foundation of the problem first, then add the automation. Our technicians are background-checked and uniformed, and they work under a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions. That’s the Keystone Standard, and it applies to every gate job we complete in Haltom City, from a simple opener repair to a full solar installation. Our Gate Motor & Opener team carries parts for the brands most common on Haltom City driveways, so most jobs are finished in one visit.
Our Gate Motor & Opener Services in Haltom City
Motor Installation
We install gate motors on the swing gates and slide gates that dominate Haltom City’s 1950s and 1960s ranch-home neighborhoods. Before we mount anything, we check the posts. In Haltom City, a motor bolted to a heaving post is a motor that will strip its gears within two seasons. If the post has moved, we reset it with a concrete collar first, then install the opener. This is the difference between a two-year motor and a fifteen-year motor.
Motor Repair
Most repair calls we answer in Haltom City are not actually motor failures. They’re post failures that killed the motor. The original galvanized hinge posts on these 50-to-70-year-old chain-link gates have been lifted two to four inches by the clay, and the gate drags, binds, and burns out the gear train. We diagnose the whole system: post, hinges, frame alignment, then the motor. You’ll know exactly what needs fixing and what it costs before we turn a single bolt.
Linear Motor Service
Linear arm operators are common on the wider double swing gates found on the larger lots along the Fossil Creek side of Haltom City and the rural edges near Loop 820. These arms work hard, and on a clay-heaved post they work themselves to death. We service and install linear motors across Haltom City, always starting with a post and frame inspection. A properly aligned gate lets a linear motor run quietly and last for years. A racked gate kills one in a season.
Slide Motor Service
Slide gates are less common in Haltom City’s older neighborhoods but do appear on the acreage and ranch properties on the edges of town and on some commercial and light-industrial sites. A slide gate on Haltom City clay has a different problem: the track shifts as the soil swells and shrinks, and the gate starts to bind on the rollers. We address the track alignment first, then service or replace the slide motor. If your gate has a Haltom City ranch entrance that quit sliding smoothly, we’ll find the cause before recommending any replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re trained and equipped on nine gate-automation brands, which matters when you have a 1960s gate with a motor that was installed in 2010. Haltom City driveways carry a real mix. We commonly service LiftMaster, Mighty Mule, and FAAC openers in the area, along with BFT on some of the larger slide gates along the city’s industrial fringe. Because we stock common parts for these brands on our service trucks, we can usually complete a repair in Haltom City in a single visit, instead of ordering a part and making you wait another week with a gate stuck open.
Common Gate Motor & Opener Problems We See in Haltom City Homes
- Clay-heaved hinge posts torquing the gate: The expansive black clay under Haltom City swells after spring rains and shrinks in summer drought. Over 50 or 60 years, this cycle lifts the original galvanized posts two to four inches out of the ground, dragging the gate out of square and forcing the opener’s gears against impossible resistance.
- Racked 1960s chain-link frames stripping linear motor gears: The frames on these original gates were never designed to carry a motor. When you add automation to a frame that has spent decades slowly twisting, the motor becomes the weakest link. We realign or rebuild the frame before the new motor goes on.
- Freeze and hail damage to lightweight gate tops and older operators: North Texas ice events, like the 2021 freeze, and spring hailstorms bend the top rails of lightweight chain-link gates and knock older openers out of service. Bent top rails change the gate’s geometry just enough to bind the opener over time.
- Undersized post footings from original 1950s construction: The original posts on many Haltom City gates were set in a shallow concrete plug, not a proper footing. Fifty years of shrink-swell has loosened them. A motor mounted to a post with a shallow, cracked footing will loosen, bind, and fail. The fix starts below grade.
Pricing for Gate Motor & Opener in Haltom City, TX
You should know the numbers before you call. A basic single swing gate opener installation in Haltom City typically runs $450 to $750 when the post and frame are sound. If the post has heaved and needs resetting, add $200 to $400 for the concrete collar and realignment. A linear arm operator for a double gate runs $700 to $1,200. Slide gate motors run $850 to $1,400, depending on gate weight and length. Adding battery backup runs $150 to $350. Solar systems, which make sense on larger Haltom City-area lots where the driveway is far from the house panel, run $1,100 to $2,200 installed. Every price is quoted and agreed in writing before any work starts. The number we quote is the number you pay. Call (817) 286-7391 for a free estimate.
We Also Serve Cities Near Haltom City
Our technicians cover the surrounding Tarrant County communities daily. If you live in Fort Worth, Hurst, Bedford, or Kennedale, we can usually reach your gate the same day we reach a Haltom City driveway. The same pricing, the same written Promise, and the same live person on the phone every time you call.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Haltom City
Because the clay is lifting your hinge post, and the gate is dragging against the motor. When Tarrant County’s expansive soil swells after spring rains, it heaves the post upward a fraction of an inch. Over a few rain seasons, that adds up to two inches or more of lift. The gate binds, the motor strains, and the gears strip. The permanent fix is resetting the post with a proper concrete collar, not replacing the gear set. Call (817) 286-7391 and we’ll check your posts before we quote any motor work.
Yes, and we do it regularly on that side of Haltom City. The older homes east of Haltom Road often have gates far from the house electrical panel, so solar makes good sense. The condition that matters more than the solar panel is the gate frame. If the original post has heaved and the frame is racked, we align and reinforce it first. A solar opener on a straight, stable gate is a clean, reliable setup. On a racked gate, the same solar motor will fail just like any other. Call (817) 286-7391 and we’ll give you a straight answer on whether solar works for your gate.
In most cases in Haltom City, the freeze didn’t damage the motor itself. What usually fails is the control board or the limit switch, because moisture got into the housing and froze. On a ranch entrance or a wide slide gate, the ice also can shift the track slightly as the clay freezes and thaws, causing the gate to bind and trip the safety. We check the board, the limits, and the track alignment on the same visit. Call (817) 286-7391 for a fast diagnosis and a written quote before any repair starts.
If you’re running a slide or swing gate opener on a larger Haltom City-area lot, a vehicle loop detector is a smart addition and sometimes a safety requirement. It senses a vehicle sitting in the gate’s path and prevents the gate from closing on it. On ranch driveways where the gate is long and the light is low, a loop cuts the risk of a gate hitting a truck or trailer. We install loop detectors with most new slide motor work. Call (817) 286-7391 and we’ll tell you whether your specific entrance needs one.
You don’t bend the hinge. The real fix is resetting the post. When the clay heaves a 1960s-era hinge post up out of the ground, the gate’s geometry changes: one side drops and drags, the latch side rises and gaps. Bending a hinge strap just makes the gate hang crooked somewhere else. We cut out the old footing, pour a new concrete collar, set the post plumb, and rehang the gate so it swings square and latches true. Our crew did exactly this on a home east of Haltom Road where the post had heaved nearly four inches, then installed a LiftMaster swing opener with battery backup. The gate has opened smoothly every day since. Call (817) 286-7391 and we’ll do the same for your Haltom City gate.
Call Ironworks Gate Co. for Gate Motor & Opener Repair in Haltom City
If your gate won’t open, won’t close, or just sounds wrong, call us. A live person answers at (817) 286-7391, 24 hours a day, 7 days a week. No voicemail trees, no callback queues, no waiting until Monday. We’ll schedule your Haltom City call, quote the work before we start, and back it with the written 90-Day Done Right Promise. Victor Salinas and the whole Ironworks Gate Co. crew stand behind every job, on every street in Haltom City, from Haltom Road east to the Fossil Creek side. Estimates are free. The repair is done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and the surrounding Tarrant County communities since 1984.