Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haltom City
Gate repair in Haltom City usually means one thing: a chain-link swing gate that has spent five or six decades fighting Tarrant County’s expansive clay soil and finally lost. The hinge post heaves, the frame racks, and the gate drags on the strike side. We fix that. Ironworks Gate Co. has served Haltom City homeowners from our Dallas-Fort Worth office for years, and we schedule repairs across the 76117 zip code quickly. A live person answers at (817) 286-7391 any hour, any day. Call when the gate won’t close. We’ll be there when we say.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Repair Company
Homeowners in Haltom City have been calling us for the same reason for years: the gate that worked fine last summer now drags the ground come spring, and nobody wants to hear that they need a whole new fence. Our Gate Repair team spends most days in Haltom City on exactly that problem. We know the streets east of Haltom Road and the neighborhoods around Fossil Creek. We know the alley-loaded lots where a swing gate barely clears the garage. We know which posts are set in black clay and which were set shallow in the 1960s. Victor Salinas, who leads our crews, has walked more of these old chain-link gates than we can count. He’ll tell you straight: most of them don’t need replacing. They need the post re-set and the frame pulled back square.
Our Haltom City customers tell us the same things. The technician showed up when promised. The price quoted before work started was the price on the bill. The gate worked when they left. That’s the standard. Every job is covered by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
Our Gate Repair Services in Haltom City
Electric Gate Repair
Older surface-mounted gate operators around Haltom City take a beating from North Texas weather. A 2010-era opener that has never been serviced will freeze up during an ice event and lose its loop detector calibration when the clay shifts the conduit. We service LiftMaster, Mighty Mule, and FAAC units, among others, and we diagnose electrical faults before replacing motors. In most Haltom City cases, the operator itself is fine. The photo-eyes are misaligned, the limit switch is off, or the control board is full of mud wasp nests. We fix that.
Automatic Gate Repair
Automatic gates in Haltom City fail in predictable ways. The operator runs, the gate doesn’t move. The gate opens, then won’t close. The remote works from ten feet but not from the street. Most of these calls come from homeowners with gate systems installed on shared driveways off the alley, where space is tight and the operator was mounted low to the ground. We carry parts for nine major automation brands on the truck, so the correct fix happens on the first visit. No ordering a board and coming back next week.
Hinge & Post Repair
This is the main event in Haltom City. The original 1960s-era galvanized hinge posts on chain-link swing gates have been heaved two to four inches above grade by the clay. The gate drags on one side and gaps at the latch on the other. Tightening the hinge straps won’t fix it because the post itself is out of the ground. We re-set the post with a concrete collar and realign the frame. That’s the repair that makes a 55-year-old gate swing like it was hung last week.
Gate Realignment
After the post is re-set, the frame still needs to come back square. On Haltom City’s modest ranch lots, we see gates that have been ratchet-strapped, shimmed, and shaved down instead of realigned. The real fix is pulling the rails back to level, checking the brace band positions, and re-tensioning the mesh so the gate hangs true. It takes patience and a good eye. It’s what we do most days in the 76117.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We are trained and equipped on nine gate-automation brands, and for Haltom City homeowners the three that show up most often are LiftMaster, Mighty Mule, and FAAC. We keep common control boards, photo-eyes, remotes, and limit switch kits on the truck, and our technicians are certified on each of these systems. Whatever is bolted to the gate post, we have seen it, serviced it, and stocked parts for it. That’s how the correct fix happens on the first visit instead of the third.
Common Gate Repair Problems We See in Haltom City Homes
- Clay-heaved hinge posts. The post rises two to four inches above grade after spring rains, the gate drags on the strike side, and the latch won’t catch. The only lasting fix is re-setting the post in a concrete collar, not bending the hinge.
- Racked chain-link frames. Decades of clay shrink and swell torque the frame out of square. The top rail bows, the mesh sags, and the gate leaf binds against the latch post. Realignment pulls it all back.
- Alley-loaded shared driveways with no swing room. In the tight setbacks behind Haltom City’s 1950s tract homes, a swing gate often can’t open fully without hitting the garage or the neighbor’s fence. A slide gate retrofit on a rack and pinion becomes the only workable layout.
- Frozen or misaligned gate operators. Older surface-mounted units without proper entrapment protection freeze during ice events like Winter Storm Uri in 2021, and loop detectors lose calibration when the clay shifts the conduit.
Pricing for Gate Repair in Haltom City, TX
A typical hinge and post re-set on a chain-link swing gate in Haltom City runs $280 to $475, including the concrete collar and frame realignment. Gate realignment alone, where the post is sound, runs $140 to $260. Electric gate repair in Haltom City typically runs $160 to $340 for limit switches, photo-eye alignment, and control board replacement, with full operator replacement running $700 to $1,500 depending on the brand. A slide gate conversion for an alley driveway starts around $1,800 for a basic rack and pinion setup. Every price is quoted and agreed before we turn a single bolt. No surprises on the bill. Call (817) 286-7391 for a free estimate. We also offer $50 off any repair over $250 and a free second opinion on any written estimate.
We Also Serve Cities Near Haltom City
Our crews serve Gate Repair in Haltom City and the surrounding Tarrant County communities. That includes Fort Worth to the west, Hurst and Bedford to the northeast, and Kennedale to the south. If your gate is in one of those cities, the same team, the same written guarantee, and the same upfront pricing apply.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Haltom City
The hinge post has heaved out of the ground. Tarrant County’s expansive black clay swells after spring rains and shrinks hard in summer drought. Over decades, that cycle pushes the post up two to four inches, which twists the frame and drops the latch side. The hinges are probably fine. The post needs to be re-set in a new concrete collar and the frame realigned. Call (817) 286-7391 and we’ll confirm it on site.
Usually yes, but the post has to be plumb and solid first. If the clay has shifted the post enough to rack the rail, we re-set the post and re-level the rail before anything else. A bowed rail or a badly seated roller will tear up a new wheel in months. We’ll tell you honestly whether the rail can stay or needs replacement, and the price is agreed before we start.
Yes. Any automatic gate on a shared driveway in Haltom City, especially an alley-loaded one, needs working photo-eyes and proper entrapment protection. This is a safety requirement and a code issue. If your operator is missing photo-eyes or they’ve been disconnected, we’ll install or reconnect them before we consider the repair done. This isn’t optional. It’s how we keep people safe.
Hinge post re-setting. The original galvanized posts were set directly in the clay, and after 50 to 70 years of heave and shrink cycles, they have risen out of the ground and the gate frame has racked. We see this on nearly every block east of Haltom Road. Re-setting the post in a concrete collar and realigning the frame fixes the drag and the latch gap in one visit. Call (817) 286-7391 for an exact quote. Estimates are free.
Yes, and it’s a repair we do regularly in Haltom City. Many of the alley-loaded lots off the older streets have so little setback that a swing gate can’t open without hitting a garage or a fence. We convert these to slide gates on a rack and pinion system that runs parallel to the fence line. The conversion is priced upfront, scheduled at your convenience, and covered by our 90-Day Done Right Promise.
Call Ironworks Gate Co. for Gate Repair in Haltom City
If your gate is dragging, sagging, or refusing to close, call (817) 286-7391. A live person answers 24 hours a day, 7 days a week. Tell them what’s happening. We’ll schedule a technician for Haltom City, quote the price before any work begins, and stand behind the repair in writing. The gate that’s been fighting you for years can close like the day it was hung. That’s what we do.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and the Dallas-Fort Worth metro.