Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haltom City
If you live in Haltom City and your gate is dragging, sagging, or the hinges have torn loose from the post, the real problem is usually not the hinge itself. It’s the post underneath it, heaved out of Tarrant County clay. We fix that. Ironworks Gate Co. handles hinge replacement, post resetting, rail repair, and custom welding for Haltom City homeowners, and we get to most jobs within one to two business days. Call (817) 286-7391 for a free estimate, and we’ll give you an upfront price before any work starts.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Parts & Welding Company
We’ve been welding and repairing gates for over 42 years, and the gates we see in Haltom City tell a specific story. Most were hung in the 1950s through 1970s, built from galvanized steel posts set directly into expansive clay. That clay swells after spring rain and shrinks in summer drought, year after year, heaving posts up and twisting frames out of square. Generalist repair crews often just tighten a hinge and leave, and the gate sags again in six months. We set the post properly first, then hang the gate so it stays level. Victor Salinas leads our team, and every technician who comes to your home is background-checked and uniformed.
When you call us from Haltom City, a live person answers. That’s true at 2 p.m. and 2 a.m. We don’t route you through a voicemail tree. We’ll schedule a visit, show up when we say, and stand behind the work with our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No arguing, no paperwork, no exceptions.
Our Gate Parts & Welding Services in Haltom City
Our Gate Parts & Welding team covers the full scope of hardware and structural repair, but in Haltom City three jobs dominate our schedule: post replacement, hinge replacement, and custom welding. Here’s how each one works in your neighborhood.
Hinge Replacement
On older Haltom City chain-link gates, the hinge straps are usually the first thing to corrode. After 50 or 60 years of Dallas-area hail, ice, and humidity cycles, the galvanizing wears thin and the strap tears at the bolt holes. We cut the old straps, weld or bolt new heavy-duty hinges into place, and realign the gate leaf so it latches clean. If the post has heaved, we address that in the same visit.
Post Replacement
This is the foundation repair of gate work. In the 76117 zip code and across Haltom City, we regularly find original hinge posts lifted two to four inches above grade by clay expansion. You can see it plainly: the gate drags on one side and gaps at the latch on the other. We dig out the old footing, re-set the post plumb in a new concrete collar, and then re-hang the gate. This is the fix that actually lasts.
Rail Repair
Fifty years of North Texas hailstorms and the occasional hard ice event, like Winter Storm Uri in 2021, have bent a lot of top rails on Haltom City gates. When the top rail bends, latch alignment goes with it, and suddenly the gate won’t close properly even though the hinges look fine. We straighten or replace the rail, then set the latch and hinge geometry back to square.
Custom Welding
Not every repair is a stock part. When a gate frame is racked, a hinge mount has torn out of the post, or a farm-style gate near Fossil Creek needs a heavier receiver plate, we weld it. Our shop handles custom brackets, reinforcement plates, gussets, and full frame repairs, fabricated to match the existing gate and finished so it holds up to Haltom City’s weather.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
When a gate operator is involved, we’re trained and equipped on nine major automation brands, including FAAC, BFT, and Linear. That covers most operators we encounter on Haltom City driveways, from simple residential swing arms to the wider farm-style gates on the city’s outskirts. We keep common hardware in stock and can source what we don’t have quickly, which means fewer return trips for Haltom City customers.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Heaved hinge posts: Tarrant County’s expansive clay has lifted 1960s-era posts up to four inches above grade on residential streets east of Haltom Road. The gate drags, the hinge straps tear, and tightening bolts never really fixes it. The post has to come out and be re-set with a proper concrete collar.
- Bent top rails from hail and ice: Decades of North Texas storms have bowed countless chain-link top rails, throwing latch alignment off and making keypad entry unreliable. Straightening or replacing the rail is a standard repair for us in Haltom City.
- Undersized operators on wide gates: Long driveways, especially around the Fossil Creek area, often have wide farm-style gates running on operators that were always too small for the load. When the post footing shifts even slightly, the operator struggles and fails. We rework the post, reinforce the frame, and make sure the operator is properly matched to the gate span.
- Corroded hinge straps and latch hardware: Fifty to seventy-year-old galvanized hardware eventually gives out. We replace worn latch posts, striker plates, and hinge straps before they fail completely, so you don’t end up locked out of your own driveway.
Pricing for Gate Parts & Welding in Haltom City, TX
Here are honest numbers for the Haltom City market. Hinge replacement on a standard chain-link walk or drive gate typically runs $95 to $225, including new heavy-duty hinges and labor. Post replacement with a concrete collar is the bigger job: expect $275 to $600 per post, depending on depth and whether we’re reusing the existing gate leaf or hanging a new one. Rail repair or replacement usually falls between $110 and $250. Custom welding jobs, where we fabricate brackets or reinforce a frame, start around $150 and go up based on materials and shop time. Every price is quoted and agreed before any work starts. We also offer $50 off any repair over $250, and a permanent 5% senior and veteran discount. Call (817) 286-7391 for a free estimate specific to your gate.
We Also Serve Cities Near Haltom City
Our Gate Parts & Welding in Haltom City coverage extends into the surrounding area. We regularly take calls from Fort Worth, Hurst, Bedford, and Kennedale homeowners, and the same 90-Day Done Right Promise applies on every job. Call (817) 286-7391 and tell us where you are. We’ll be there when we say.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haltom City
Because the post under the hinge has heaved out of the clay. In Haltom City, the expansive soil lifts posts two to four inches above grade over decades, which twists the frame out of square regardless of how new the hinges are. The real fix is re-setting the post with a concrete collar and then re-hanging the gate level. Call (817) 286-7391 and we’ll take a look and give you a straight answer.
Yes, and we do it often. Most Haltom City homes built in the 1950s through 1970s still have their original chain-link frames, and these gates are repairable with the right welding and hardware. We preserve the original frame where it’s sound, replace what’s worn, and set the posts properly so the gate hangs true again.
After heavy rain, the clay swells and shifts the gate posts enough to bind the gate leaf, which overloads the opener and drains or overheats the battery. We re-set the post, realign the gate so it swings freely, and check the solar panel wiring and battery so the system works after the next storm too. Estimates are free if you’d like us to diagnose it.
We reinforce the frame, set the posts in proper footings, and match the operator to the actual span and weight of the gate. Wide gates need more than a bigger motor; they need the hinge and post geometry to be right first, or any operator will fail. We’ll measure it, quote it, and build it to last.
Yes. We replace worn striker plates, latch posts, drop rods, and lock hardware on chain-link gates every week in Haltom City. If the gate no longer latches clean because the frame has shifted, we correct the frame and replace the hardware in the same visit. Call (817) 286-7391 and we’ll get you scheduled.
Call Ironworks Gate Co. for Gate Parts & Welding in Haltom City
Your gate should hang level, latch clean, and swing without dragging. If it doesn’t, we’ll fix it, and we’ll put the guarantee in writing. Call (817) 286-7391 for a free estimate, or ask about our free second opinion on any written estimate you’ve already received. A live person answers, day or night.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City’s gate repair and welding needs for over 42 years.